www.dropbox.com Open in urlscan Pro
2620:100:6022:18::a27d:4212  Public Scan

Form analysis
1 forms found in the DOM

POST

<form class="clearfix credentials-form register-form" method="post" novalidate="">
  <div class="credentials-form__fields">
    <div>
      <div class="register-form__name-fields">
        <div class="text-input standard input-fname first text-input__margin-right">
          <div id="fname4480772575176226__input-error" aria-live="polite" aria-atomic="true" class="text-input-error-wrapper"></div>
          <div class="text-input-wrapper"><label class="" for="fname4480772575176226">Vorname</label><input id="fname4480772575176226" type="text" class="text-input-input" name="fname" autocomplete="given-name"
              aria-describedby="fname4480772575176226__input-error" aria-invalid="false" inputmode="text" value=""></div>
        </div>
        <div class="text-input standard input-lname second">
          <div id="lname008700835805832918__input-error" aria-live="polite" aria-atomic="true" class="text-input-error-wrapper"></div>
          <div class="text-input-wrapper"><label class="" for="lname008700835805832918">Nachname</label><input id="lname008700835805832918" type="text" class="text-input-input" name="lname" autocomplete="family-name"
              aria-describedby="lname008700835805832918__input-error" aria-invalid="false" inputmode="text" value=""></div>
        </div>
      </div>
      <div class="register-form__credential-fields">
        <div class="text-input standard input-email text-input__margin-right">
          <div id="email25932481275983577__input-error" aria-live="polite" aria-atomic="true" class="text-input-error-wrapper"></div>
          <div class="text-input-wrapper"><label class="" for="email25932481275983577">E-Mail-Adresse</label><input id="email25932481275983577" type="email" class="text-input-input" name="email" autocomplete="username"
              aria-describedby="email25932481275983577__input-error" aria-invalid="false" inputmode="text" value=""></div>
        </div>
      </div>
    </div>
    <div class="register-form__credential-fields">
      <div class="text-input standard input-password">
        <div id="password8309039571014745__input-error" aria-live="polite" aria-atomic="true" class="text-input-error-wrapper"></div>
        <div class="text-input-wrapper"><label class="" for="password8309039571014745">Passwort</label><input id="password8309039571014745" type="password" class="text-input-input password-input" name="password" autocomplete="new-password"
            aria-describedby="password8309039571014745__input-error" aria-invalid="false" inputmode="text" value=""></div>
      </div>
    </div>
  </div>
  <div class="tos-text-row tos-text-implicit dwg-box dwg-mt--2"><span class="dwg-text dwg-font-family--atlas-grotesk dwg-font-size--12 dwg-line-height--16 dwg-box dwg-p--0 dwg-m--0 dwg-bg-color--transparent">Durch die Auswahl „Zustimmen und
      Registrieren“ stimme ich den <a href="/terms" target="_blank" rel="noreferrer noopener" data-uxa-log="google_onetap_signup_dropbox_terms_link">Allgemeinen Geschäftsbedingungen von Dropbox</a> zu. In unserer
      <a href="/privacy" target="_blank" rel="noreferrer noopener" data-uxa-log="google_onetap_signup_privacy_policy_link">Datenschutzrichtlinie</a> können Sie nachlesen, wie wir Ihre Daten nutzen und schützen.</span></div><button
    class="login-button button-primary" type="submit" data-uxa-log="register_form_submit_button"><span>Zustimmen und Registrieren</span></button><button class="auth-google button-primary button-undefined" type="button"
    data-uxa-log="google_signup_start"><span class="sign-up-text">Mit Google registrieren</span></button>
  <div class="recaptcha-v2-challenge-container recaptcha-v2-challenge-container--invisible">
    <div class="recaptcha_v2_challenge"></div>
  </div>
  <div class="fingerprintjsDiv"></div>
</form>

Text Content

Herunterladen
Kopie auf Dropbox speichern
Speichern als …

AnmeldenRegistrieren




 1.  
     1
 2.  
     2
 3.  
     3
 4.  
     4
 5.  
     5
 6.  
     6
 7.  
     7
 8.  
     8
 9.  
     9
 10. 
     10
 11. 
     11
 12. 
     12
 13. 
     13
 14. 
     14
 15. 
     15
 16. 
     16
 17. 
     17
 18. 
     18
 19. 
     19
 20. 
     20
 21. 
     21

 1.  
     15'-0"6'-0"6'-6"121'-0"6'-6"37'-0"4'-0"4'-0"4'-0"4'-0"8'-0" BUILDING
     LINE6'-6"6'-6"5'-0"NEW 3 STORY, 23 UNIT APARTMENTBUILDING1528 EAST VERNON
     STLOS ANGELES, CA 90011PROJECT DESCRIPTIONCONSTRUCTION OF:NEW 23 UNIT
     APARTMENT BUILDING3 STORIES FULLY SPRINKLERED (NFPA 13)100% AFFORDABLE
     HOUSING (LOW INCOME)(NO PARKING REQUIRED)ROOF DECK OPEN SPACEPRIVATELY
     FUNDEDPROJECT DATASITE ADDRESS: 1528 EAST VERNON STLOS ANGELES, CA 90011LOT
     AREA: 3,750.1 Sq.Ft. + 3,750.1 Sq.Ft = 7,500.2 Sq.Ft.TRACT: DAW AND NILES
     SUBDIVISION OF THE TOWN OFVERNONDALEBLOCK: BLK 2LOT: 5,6ARB: NONEAPN:
     510-600-1002ZONING: C2-2D-CPIOT.O.C : TIER 3 (TIER 4 FOR 100% AFFORDABLE
     HOUSING)CONST. TYPE : III.ACALCULATED AREAS:DENSITY: 400SF/UNITUNITS
     ALLOWED BY RIGHT: 7,500/400 = 18.75 = 19 UNITSDENSITY INCREASE: 80% FOR
     TIER 4 = 34.2 = 35 UNITSMAX UNITS ALLOWED: 35UNITS PROVIDED: 23PROJECT
     DIRECTORYOWNER / DESIGNER :ENGINEERGERMAN CHATSKY6541 ODESSA AVEVAN NUYS,
     CA 91406310-936-2585SHEET INDEXA-1.0PLOT PLANA-1.1GREEN NOTESA-1.2ESR
     REPORTSA-1.3BIKE RACK DETAILSA-1.4DENSITY/FAR CALCULATIONSA-1.5OPEN SPACE
     CALCULATIONA-1.6NOTESA-1.7ENERGY STAR SPECSA-1.8ENLARGED ADA
     UNITA-1.81ENLARGED ADA UNITA-1.82ENLARGED STAIRS/ELEVATORA-1.9ELEVATOR
     SPECSA-2.0 FIRST FLOOR LAYOUTA-3.0SECOND FLOOR LAYOUTA-4.0THIRD FLOOR
     LAYOUTA-5.0ROOF PLANA-6.0 ELEVATIONSA-7.0 ELEVATIONSA-8.0
     SECTIONSAPPLICABLE CODES1. THE CONTRACTOR IS RESPONSIBLE TO CHECK THE PLANS
     AND IS TO NOTIFY THE DESIGNER / ENGINEER OF ANY ERRORS OR OMISSIONS PRIOR
     TO THE START OF CONSTRUCTION.2. THE CONTRACTOR SHALL BE RESPONSIBLE FOR
     VERIFYING ALL EXISTING CONDITIONS, DIMENSIONSAND GRADE ELEVATIONS. ANY
     DISCREPANCIES SHALL BE REPORTED IN WRITING TO THE DESIGNER /ENGINEER PRIOR
     TO THE COMMENCEMENT OF WORK. THE CONTRACTOR'S BID SHALL INCLUDE HIS OWNJOB
     SITE OBSERVATIONS AND WILL NOTE ANY INCONSISTENCIES AND CONFLICTS.3. NO
     CHANGES SHALL BE MADE ON THESE PLANS WITHOUT THE KNOWLEDGE OR CONSENT OF
     THEENGINEER.4. OMISSIONS FROM THE PLANS AND SPECIFICATIONS SHALL NOT
     RELIEVE THE CONTRACTOR FROM THERESPONSIBILITY OF FURNISHING, MAKING, OR
     INSTALLING ITEMS REQUIRED BY LAW OR ITEMS THATARE USUALLY FURNISHED, MADE,
     OR INSTALLED IN A PROJECT WITHIN THE SCOPE AND CHARACTERINDICATED BY THE
     PLANS & SPECIFICATIONS.5. REFERENCES TO ANY DETAIL OR DRAWING DOES NOT
     LIMIT ITS APPLICATION BUT SHALL BE USED ONSIMILAR OR TYPICAL CONDITIONS.6.
     THE CONTRACTOR SHALL PROVIDE ALL LABOR, MATERIALS, EQUIPMENT, TOOLS,
     TRANSPORTATION,UTILITIES, AND OTHER SERVICES NECESSARY TO PROPERLY EXECUTE
     THE WORK.7.ALL WORKMANSHIP SHALL COMPLY WITH THE INDUSTRY STANDARDS. THE
     ABSENCE OF A DETAILREFERENCE DOES NOT RELIEVE THE CONTRACTOR OF THE
     RESPONSIBILITY OF MEETING THEACCEPTABLE STANDARDS.8. THESE DRAWINGS DO NOT
     CONTAIN THE NECESSARY COMPONENTS FOR CONSTRUCTION SAFETY.WORKER,
     PEDESTRIAN, BYSTANDERS, ADJACENT PROPERTIES, AND JOB SITE
     PROPERTIESPROTECTION SHALL BE PROVIDED AND MAINTAINED BY THE CONTRACTOR. IT
     IS THE CONTRACTOR'SSOLE RESPONSIBILITY TO ENSURE AT ALL TIMES THE SAFETY OF
     THE PEOPLE AND PROPERTYINVOLVED AND RELATED TO THIS PROJECT.9. ALL
     MATERIALS, PARTS, AND EQUIPMENT FURNISHED BY THE CONTRACTOR IN THE WORK
     SHALL BEBRAND NEW, FREE FROM ANY DEFECTS, AND THE QUALITY OF WORK SHALL BE
     IN ACCORDANCEWITH THE GENERALLY ACCEPTED STANDARDS.10. IT SHALL BE THE
     RESPONSIBILITY OF THE CONTRACTOR TO CHECK THE DRAWINGS PRIOR TOINSTALLATION
     OF ANY ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL WORK.SHOULD
     THERE BE A CONFLICT OR DISCREPANCY IT SHALL BE BROUGHT TO THE ATTENTION OF
     THEDESIGNER / ENGINEER FOR CLARIFICATION.11. ANY WORK DONE IN CONFLICT WITH
     THESE DRAWINGS SHALL BE CORRECTED BY THE CONTRACTORAT HIS OWN EXPENSE AND
     AT NO COST TO THE OWNER.12. THESE DRAWINGS REPRESENT THE FINISHED STRUCTURE
     AND DO NOT INDICATE THE MEANS ANDMETHODS OF CONSTRUCTION. THE CONTRACTOR IS
     RESPONSIBLE FOR ALL THE TEMPORARYBRACINGS, SHORINGS, SCAFFOLDINGS, AND
     SUPPORTS NECESSARY TO COMPLETE THE BUILDING.13. THE CONTRACTOR SHALL BE
     RESPONSIBLE FOR ALL THE SUBCONTRACTORS, TRADES, AND WORKMENAND SHALL AT ALL
     TIMES KEEP THE PREMISES FREE FROM ACCUMULATION OF WASTE MATERIALS ORRUBBISH
     CAUSED BY THEIR WORK.14. A TEMPORARY TOILET SHALL BE PROVIDED AT THE JOB
     SITE AT ALL TIMES DURING CONSTRUCTION.15. PRIOR TO FINAL INSPECTION AND
     AFTER THE WORK IS COMPLETE, THE CONTRACTOR SHALLTHOROUGHLY CLEAN THE AREA
     INSIDE AND OUT AND UTILIZE PROFESSIONAL CLEANERSWHEN NECESSARY.THE
     CONSTRUCTION SHALL NOT RESTRICT A FIVE (5) FT. CLEAR AND UNOBSTRUCTED
     ACCESS TO ANYWATER OR POWER DISTRIBUTION FACILITIES (POWER POLES, PULL
     BOXES, TRANSFORMERS, VAULTS,PUMPS, VALVES, METERS, APPURTENANCES, ETC.) OR
     TO THE LOCATION OF THE HOOK-UP. THE CONS-TRUCTION SHALL NOT BE WITHIN TEN
     (10) FT. OF ANY POWER LINES WHETHER OR NOT THE LINES ARELOCATED ON THE
     PROPERTY. FAILURE TO COMPLY MAY CAUSE CONSTRUCTION DELAYS AND/OR
     ADDI-TIONAL EXPENSES.ALL CONSTRUCTION AND ALL WORKS SHALL BE IN ACCORDANCE
     WITH THE 2019 CBC,CEC, CMC, CPC, THEIR L.A. AMENDMENTS, AND THE L.A. GREEN
     BUILDING CODE ORDINANCE.GENERAL NOTESSHEET INDEX
     (CONTINUE)A-1.0REVISIONSBYSITE PLANSHAWN CONSULTING A-9.0 LIFE SAFETY
     PLANSA-9.1 LIFE SAFETY PLANSA-9.2 LIFE SAFETY PLANSA-9.3 LIFE SAFETY
     PLANSH-1.0 ACCESSIBILITY NOTES AND DETAILSH-2.0 ACCESSIBILITY NOTES AND
     DETAILSH-3.0 ACCESSIBILITY NOTES AND DETAILSH-4.0 ACCESSIBILITY NOTES AND
     DETAILSH-5.0 ACCESSIBILITY NOTES AND DETAILSH-6.0 ACCESSIBILITY NOTES AND
     DETAILSH-7.0 ACCESSIBILITY NOTES AND DETAILSH-8.0 ACCESSIBILITY NOTES AND
     DETAILSH-9.0 ACCESSIBILITY NOTES AND DETAILSH-10.0 ACCESSIBILITY NOTES AND
     DETAILS(N) 3 STORY APARTMENTS23 UNITS100% AFFORDABLE HOUSINGLOW
     INCOME11,040.00 S.F.PRIVATELY FUNDEDNO TAX CREDIT RECEIVEDSHEET INDEX
     (CONTINUE)S-1.0 NOTES, SHEAR WALL SCHEDULE,STRUCTURAL OBSERVATIONS-2.0
     FOUNDATION PLANS-3.0 SECOND FLOOR FRAMING PLANS-4.0 THIRD FLOOR FRAMING
     PLANS-5.0 FOURTH FLOOR FRAMING PLANS-6.0 ROOF FRAMING PLANS-7.0 STRUCTURAL
     DETAILSS-8.0 STRUCTURAL DETAILSG-1.0 R&R PLANSG-2.0 SECTIONSG-3.0 A-B-C
     SLOT CUT/DRAINAGE PLANNORTHFLOOR AREA CALCULATIONS 4,477SECOND THIRD FIRST
     TOTAL505015750AREA OFEXTERIORWALLS (SF)AREA OF COURTSAND VENTSHAFTS
     (SF)GROSS AREA(SF)BUILDINGCODE AREA(SF)AREA OFSTAIRWAYS,MEP ROOMS
     (SF)ZONINGCODE
     AREA(SF)FLOORNUMBER4,4774,4771571574,2704,2704,2705905905903,6803,6803,68013,43147115012,8101,77011,040LABCMAX
     ALLOWED HEIGHT PER TABLE 504.3 : 70FT(TYPE III.A)MAX HEIGHT PROVIDED:
     31FTMAX ALLOWED STORIES PER TABLE 504.4: 4 STORIES (TYPE III.A)NUMBER OF
     STORIES PROVIDED : 3 STORIESMAX ALLOWED BUILDING AREA PER 506.2.3: 12,000
     SF(TYPE III.A)BUILDING AREA PROVIDED: 11,040 SFLAFCFIRE ALARM: MANUAL FIRE
     ALARM SYSTEM PER LAFC 907COMMUNICATION SYSTEM : TWO-WAY RADIO
     COMMUNICATIONSYSTEM PER LAFC 51023 UNIT APARTMENTS LOS ANGELES, CA
     900111528 EAST VERNON ST ADDRESS:OWNER:PROPERTY LINE 150.00'PROPERTY LINE
     150.00'PROPERTY LINE 50.00'OLD PROPERTY LINE 50.00'6" DEEP PERM PAVERS4'
     CLEAR STABLE SOLIDSURFACE PATH OF TRAVEL-USE PERMEABLE PAVERSTHROUGHOUT ALL
     PATHWAYS.GAS METER ELEC METER WEATHER OR SOILBASED IRRIGATIONCONTROL3 SHORT
     TERM BIKEPARKING (SEE A-2.0FOR BIKE PARKINGCALCULATION)4' CLEAR STABLE
     SOLIDSURFACE PATH OF TRAVEL-USE PERMEABLE PAVERSTHROUGHOUT ALL
     PATHWAYS.4'-6"MINFIRE DEPARTMENTCONNECTION LINE60' FROM NEAREST HYDRANT2%
     SLOPE2% SLOPENEW PROPERTY LINE 50.00'MAILBOXLOWEST POINT5 FEET AWAYFROM
     BUILDINGDRIP LINES6ZONE 6 LANDSCAPE365 S.F.GROUNDCOVER3ZONE 6 LANDSCAPE365
     S.F.GROUNDCOVER6b RT6a RT6 RT130 GAL300 GAL300 GALDSTIED3 RT3a RT3b RTDS300
     GAL 250 GAL 130 GAL196.60'TIED196.97'B6BGROUNDCOVER4" PVC SUBTERRAIN DRAIN
     TO CURB65DS5300 GALRT196.24'150 SFLANDSCAPE ZONE
     5GROUNDCOVERGROUNDCOVER54DS4300 GALRT195.96'B44BB150 S.F.ZONE 4
     LANDSCAPEB6" DEEPPERMEABLEPAVERS125 S.F.ZONE 1
     LANDSCAPE193.76'3GROUNDCOVER4" PVC SUBTERRAIN DRAIN TO CURB3DS2RT265
     GAL196.24'GROUNDCOVERZONE 2 LANDSCAPEGROUNDCOVERGROUNDCOVER1DS4RT265
     GAL195.96'1B193.93'49" BETWEENPL + TANKS2BOVERFLOW TOCURB DRAINOVERFLOW
     TOCURB DRAINNOTE TO CONTRACTOR:FIRE ALARM SYSTEM & MONITORINGELEVATOR &
     FIRE SPRINKLERWILL BE PULLED UNDER SEPARATE PERMITLos Angeles Fire
     DepartmentFire Development ServicesLADBS Permit Approval Only(Fire/Life
     Safety Plan review )APPROVED PLANSBy: WILLIAM JOHNSDate:
     10/24/2022Transaction ID Number: C21-00382Subject to field InspectionThe
     approval of these plans and/or specifications does not exempt them from
     strict compliance withall other pertinent sections of the Municipal Code
     and other laws and regulations.
     
 2.  
     GREEN NOTESREVISIONSBYSHAWN CONSULTING LOS ANGELES, CA 900111528 EAST
     VERNON STADDRESS:OWNER:A-1.123 UNIT APARTMENT
     
 3.  
     ESR REPORTSREVISIONSBYSHAWN CONSULTING A-1.21528 EAST VERNON ST 23 UNIT
     APARTMENTADDRESS:LOS ANGELES, CA 90011OWNER:
     
 4.  
     BIKE RACK DETAILSOPEN SPACE CALCULATIONREVISIONSBYSHAWN CONSULTING
     A-1.31528 EAST VERNON ST 23 UNIT APARTMENTADDRESS:LOS ANGELES, CA
     90011OWNER:
     
 5.  
     15'-0"121'-0"6'-0"37'-0"8'-0"6'-6"6'-6"15'-0"135'-0"40'-0"5'-0"5'-0"A-1.4SHAWN
     CONSULTING REVISIONSBYDENSITY/FAR CALCULATIONS23 UNIT APARTMENTS LOS
     ANGELES, CA 900111528 EAST VERNON ST ADDRESS:OWNER:PROPERTY LINE
     150.00'PROPERTY LINE 50.00'NEW PROPERTY LINE 50.00'OLD PROPERTY LINE
     50.00'DENSITY CALCULATIONLOT SIZE: 7,500.2 Sq.Ft.ZONE: C-2TOTAL UNIT
     ALLOWED: 18.75 =19 UNITSDENSITY INCENTIVES: 80%MAX UNITS ALLOWED: 34.2 = 35
     UNITSUNITS PROVIDED: 23 UNITSPROPERTY LINE 150.00'PROPERTY LINE 50.00'NEW
     PROPERTY LINE 50.00'OLD PROPERTY LINE 50.00'FAR CALCULATIONBUILDING SIZE:
     5,400 Sq.Ft.ZONE:1.5 : 1 + 45% = 2.175:1 FARTOTAL AREA ALLOWED:5,400 x
     2.175 = 11,745.00 Sq.Ft.PROPERTY LINE 150.00'PROPERTY LINE 150.00'
     
 6.  
     8'-0"6'-6"6'-6"15'-0"6'-0"1'-11"3'-8"3'-8"3'-8"3'-8"1'-11"5'-0"3'-8"3'-8"3'-8"3'-8"5'-0"4'-0"4'-0"48'-9"15'-0"48'-3"15'-0"32'-4"15'-0"4'-0"
     MIN4'-0" MIN4'-0" MIN7'-0"9'-0"6'-6"10'-0"4'-0" MINA-1.5SHAWN CONSULTING
     REVISIONSBYOPEN SPACE CALCULATION23 UNIT APARTMENTS LOS ANGELES, CA
     900111528 EAST VERNON ST ADDRESS:OWNER:BACK YARD750 S.F.PROPERTY LINE
     150.00'PROPERTY LINE 150.00'PROPERTY LINE 50.00'OLD PROPERTY LINE
     50.00'OPEN SPACE CALCULATIONOPEN SPACE REQ.:< 3 HABITABLE ROOM, 23x100
     Sq.Ft :2,300.00 Sq.Ft.BACKYARD OPEN SPACE: 15'x50' : 750.00 Sq.Ft.ROOF DECK
     OPEN SPACE: 1,900.00 Sq.Ft.TOTAL OPEN SPACE PROVIDED : 2,650.00 Sq.Ft.NEW
     PROPERTY LINE 50.00'PROPOSEDELEVATORRISE = 7" MAXRUN = 11" MIN34"-38"
     HANDRAIL34"-38" HANDRAILRISE = 7" MAXRUN = 11" MIN34"-38" HANDRAIL34"-38"
     HANDRAIL36"x48"RESCUE AREADND3PHRISE = 7" MAXRUN = 11" MIN34"-38"
     HANDRAIL34"-38" HANDRAILRISE = 7" MAXRUN = 11" MIN34"-38" HANDRAIL34"-38"
     HANDRAIL36"x48"RESCUE AREADND3W3W34'X3' HI PLANTED BARRIER 730 SF 440 SF
     730 SF 4'X3' HI PLANTED BARRIER 3 YEAR SRI= 89CLASS AEVERGUARD EXTREMETPO
     SINGLE PLY: LOW SLOPEINITIAL SOLAR REFLECTANCE: 0.83INITIAL EMISSIVITY:
     0.84INSTALL PER MANUFATURESSPECIFICATION.SLOPE= 2% SLOPE= 2% SLOPE= 2%
     SLOPE= 2% SLOPE= 2% SLOPE= 2% 3 YEAR SRI= 89CLASS AEVERGUARD EXTREMETPO
     SINGLE PLY: LOW SLOPEINITIAL SOLAR REFLECTANCE: 0.83INITIAL EMISSIVITY:
     0.84INSTALL PER MANUFATURESSPECIFICATION.PATH OF TRAVELPATH OF TRAVEL42"
     PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42"
     PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42" PARAPET 42"
     PARAPET 42" PARAPET 42" PARAPET
     8S-78S-78S-78S-78S-711S-712S-711S-712S-7ø5'-0"ELEVATORPROVIDE ADDITIONAL
     SMOKE ANDDRAFT CONTROL HOISTWAY DOOR, UL1784 TESTED60 MIN RATED
     OPENINGELEVATOR CAR SHALLHAVE MIN DIMENSION OF80"x54" AND A 42"
     CLEAROPENING90 MIN FIRE RATED DOORELEVATORSHALL BE
     UNDERSEPARATEPERMITMECHANICALROOMMECHANICALROOM SHALL
     BEUNDERSEPARATEPERMITPH
     
 7.  
     NOTES1- In buildings used for residential occupancies, draftstops must be
     installed in wood frame floorconstruction containing concealed space.
     Draftstopping shall be located above and in line with thedwelling unit and
     sleeping unit separation. (718.3.2).2- Draft-stopping materials must not be
     less than ½-inchgypsum board, 3/8-inch plywood, 3/8-inch Type 2-Mparticle
     board or other materials approved by the buildingdepartment. Draft-stopp3-
     Note on plans: Fire blocking must be provided inaccordancewith Section 718
     at the following locations:a. In concealed spaces of stud walls and
     partitions,includingfurred spaces, at the ceiling and floor levels.
     (718.2.2)b. In concealed spaces of stud walls and
     partitions,includingfurred spaces, at 10-foot intervals along the length of
     thewall. (718.2.2)c. At all interconnections between concealed
     verticalandhorizontal spaces such as occur at soffits, drop ceilings,cove
     ceilings and similar locations. (718.2.3)d. In concealed spaces between
     stair stringers at thetop andbottom of the run and between studs along and
     in line withthe run of stairs if the wall under the stairs is
     unfinished.(718.2.4)e. In openings around vents, pipes, ducts,
     chimneys,fireplaces and similar openings which afford a passage forfire at
     ceiling and floor levels, with noncombustiblematerials. (718.2.5)4- This
     building is of Type V-A / III-A construction, provide /show:a. Continuous
     drywall behind all tubs is required unlessthewalls are within the unit and
     non- bearing. Back to backtubs with a common plumbing wall are impractical
     in 1-hour buildings.b. All interior bearing walls shall be constructed of
     notlessthan 1-hour fire-resistive construction. (T-601)c. Attic access
     openings in 1-hour ceiling can be 2layers of3/4" plywood or one layer of
     1-5/8" T&G material,self-closing.d. All openings in floors are required to
     be enclosed byashaft having wall, floor, and ceiling of __________ hourfire
     resistive construction. (713.1)e. Recessed ceiling light fixtures must be
     boxedaroundwith 5/8" Type “X” drywall” to maintain the 1-hourceiling
     assembly.f. Continuous drywall is required behind all electricalservice
     panels, fire hoses and medicine cabinets.g. Exhaust fans from the bathroom
     must enter throughthe wall. Dampers are required if the ceiling
     ispenetrated (717.5)h. Plumbing penetration through horizontal
     occupancyseparations shall be boxed out and filled with approvedsafing
     material. Insulation is not approved.A. Penetration of the 1 hour ceiling
     by ducts from the FAUand the stove hood require dampers (use a ductlesshood
     whenever possible). Attic units (including heatpumps) require dampers at
     all ceiling penetrations(711)j. Steel beams and columns shall be protected
     asrequired for 1-hour protection. Where ceiling forms theprotective
     membrane for fire-resistive assemblies(occupancy separations and rated
     roof/ceiling orfloor/ceiling assemblies), the construction (floor
     joists)and their supporting horizontal structural members(beams) need not
     be individually fire protected exceptwhere such members support directly
     applied loadsfrom more than one floor or roof. The required fireresistance
     shall not be less than that required forindividual protection of members.
     (704.3)k. All plumbing penetrations thru walls which requireprotected
     openings (Fire walls, Fire barriers, Firepartitions) are required to be
     galvanized or cast ironpiping.5-1. Exit signs shall be internally or
     externally illuminated2. Exit signs illuminated by an external source shall
     haveanintensity of not less than 5 foot candles (54 Iux).3. Internally
     illuminated signs shall be listed and labeledand shallbe installed in
     accordance with the manufacturer’sinstructionsand Section 2702.4. Exit
     signs shall be illuminated at all times.5. Exit signs shall be connected to
     an emergency powersystemthat will provide an illumination of not less than
     90min. incaseof primary power loss. (1013.5-1013.6.3)6. Egress doors shall
     be readily openable from the egresssidewithout the use of a key or special
     knowledge or effort.(1010.1.9)7. Door handles, lock and other operating
     devices shall beinstalled at a min. 34” and a max. 48” above the
     finishedfloor.(1010.1.9.2)8. All egress door operation shall also comply
     with Section1010.1.99. The means of egress, including the exit discharge,
     shallbeilluminated at all times the building space served by themeansof
     egress is occupied. The means of egress illuminationlevelshall not be less
     than 1foot-candle at the walking surface.(1008.1)10.The power supply for
     means of egress illumination shallnormally be provided by the premises’
     electrical supply. Intheevent of power supply failure, an emergency
     electricalsystem shall automatically illuminate the following
     areas(1008.3):a. Aisles and unenclosed egress stairways in roomsandspaces
     that require two or more means of egress;b. Corridors, exit enclosures and
     exit passageways inbuildings required to have two or more exits.;c.
     Exterior egress components at other than their levelofexit discharge until
     exit discharge is accomplished forbuildings required to have two or more
     exits.d. Interior exit discharge elements, as permitted inSection 1028.1,
     in buildings required to have two ormore exits.e. Exterior landings, as
     required by Section 1010.1.6,forexit discharge doorways in buildings
     required to havetwo or more exits.11.The emergency power system shall
     provide power for aduration of not less than 90 minutes and shall consist
     ofstorage batteries, unit equipment or an on-site generator.The
     installation of the emergency power system shall be inaccordance with
     Section 2702. (1008.3)12.Emergency lighting facilities shall be arranged to
     provideinitial illumination that is at least an average of 1foot-candle(11
     lux) and a minimum at any point of 0.1 foot-candle (1lux) measured along
     the path of egress at floor level.Illumination levels shall be permitted to
     decline to 0.6footcandle (6 lux) average and a minimum at any pointof
     0.06foot-candle (0.6 lux) at the end of the emergency lightingtime
     duration. A maximum-to-minimum illuminationuniformity ratio of 40 to 1
     shall not be exceeded. (1008.3)13.The exit signs shall also be connected to
     an emergencyelectrical system provided from storage batteries unitequipment
     or an on-site generator set, and the system shallbe installed in accordance
     with the Electrical Code. Forhigh rise buildings, see section
     403.14.Provide stairway illumination. Min. 1 foot-candle at treadruns.
     (1205.4)15.27. Detail all stairways to comply with Section 1011a. Rise: 7"
     max. Run (tread): 11” min. (1011.5)b. Rise: 7.75” max. Run (tread): 10” for
     stairs withindwelling units. (1011.5.2)c. Headroom clearance: 6'-8."
     (1011.3)d. Width: (44") (36”) (48” between hand rails foraccessible
     stairs). (1011.2)e. Landing width: Same as stairway served (1011.6)f.
     Landing length: Same as width, max. 48” (1011.6)g. Provide a landings at
     every 12ft. of vertical rise atstairways. (1011.8)h. Handrail height:
     34-38”, max 4” openings(1014.2 and 1015.4)i. Handgrip portion of handrail
     shall not be less than1.25" and not greater than 2" in cross-section
     forcircular type. 4”- 6.25”perimeter for other shapes.(1014.3)j. A minimum
     1.5” handrail clearance from adjacent wall(1014.7)k. Handrail extension of
     12" beyond the top and bottomriser. (1014.6)l. 1-hour fire rated
     construction for the enclosed usablespace under the stairs. (1011.7.4)m.
     Curved stairways:(1011.9)n. Spiral stairways: (1011.10)16.Toilet rooms
     shall be provided with a fully openableexteriorwindow with an area not less
     than 3 square feet or avertical duct not less than 100 square inches in
     area for thefirst water closet plus 50 square inches additional of areafor
     each additional water closet, or a mechanically operatedexhaust system
     capable of providing a complete change ofair every 15 minutes. Such
     mechanically operated exhaustsystem shall be connected directly to the
     outside, and thepoint of discharge shall be at least 3 feet from any
     openingthat allows air entry into occupied portions of the
     building.17.Walls and partitions within 2 feet of service sinks,urinals,and
     water closets shall have a smooth, hard, nonabsorbentsurface, to a height
     of not less than 4 feet above the floor,and except for structural elements,
     the materials used insuch walls shall be of a type that is not adversely
     affectedby moisture. (1210.2.2)18. Cement, fiber-cement, or glass mat
     gypsum backers incompliance with ASTM C1178, C1288 or C1325 shall beused as
     a base for wall tile in tub and shower areas andwall and ceiling panels in
     shower areas. Water-resistancegypsum backing board shall be used as a base
     for tile inwater closet compartment walls when installed inaccordance with
     GA-216 or ASTM C840. Regular gypsumwallboard is permitted under tile or
     wall panels in other walland ceiling areas when installed in accordance
     withGA-216or ASTM C840. Water-resistant gypsum board shall not beused in
     the following locations: Section 2509.2a. Over a vapor retarder.b. In areas
     subject to continuous high humidity,such as saunas, steam rooms or
     gangshower roomsc. On ceilings where frame spacing exceeds 12inches O.C.
     for ½ inch thick and more than 16inches O.C. for 5/8 inch thick.19.Every
     space intended for human occupancy shall beprovided with natural light by
     means of exterior glazedopenings in accordance with Section 1205.2 or shall
     beprovided with artificial light that is adequate to provide anaverage
     illumination of 10 foot-candles over the area ofthe room at a height of 30
     inches above the floor level.(1205.1 and 1205.3)20. Provide anti-graffiti
     finish at the first 9 feet, measuredfrom grade, at exterior walls and
     doors. (6306)21. Each pane of safety glazing installed in
     hazardouslocationsshall be identified by a manufacturer’s
     designationspecifying who applied the designation, the manufacturer
     orinstaller and the safety glazing standard. The following shallbe
     considered specific hazardous locations for thepurposed of safety glazing.
     Glazing in: Section 2406a. Swing doors.b. Fixed and sliding panels of
     sliding door assemblies andpanels in sliding and bi-fold closet door
     assemblies.c. Storm doors.d. Unframed swinging doors.e. Doors and
     enclosures for hot tubs, whirlpools, saunas,steam rooms, bathtubs, and
     showers.f. Fixed or operable panels adjacent to a door where thenearest
     exposed edge of the glazing is within 24inches (610 mm) arc of either
     vertical edge of the doorin a closed position and where the bottom
     exposededge of the glazing is less than 60 inches (1525 mm)above the
     walking surface. Read code for exceptions.g. Fixed or operable panel, other
     than described in itemse and f, which meets all of the following conditions
     (readcode for exception with special installation).i. Exposed area of an
     individual pane greater than 9square feet (0.84 m2)ii. Exposed bottom edge
     less than 18 inches (457 mm)above the floor.iii. Exposed top edge greater
     than 36 inches (914 mm)above the floor.iv. One or more walking surfaces
     within 36 inches (914mm) horizontally of the plane of the glazing.h. Guards
     and railings regardless of area or height abovea walking surface. Included
     are structural baluster panelsandnonstructural in-fill panels.i. Walls and
     fences enclosing indoor and outdoorswimmingpools and spas where all of the
     following conditions arepresent:i. The bottom edge of the glazing is less
     than 60 inches(1525 mm) above a walking surface on the pool orspa side of
     the glazing.ii. The glazing is within 60 inches (1525 mm) of aswimming pool
     or spa water’s edge.j. Adjacent to stairways, landings and ramps within
     36inches horizontally of a walking surface; when theexposed surface of the
     glass is less than 60 inches abovethe plane of the adjacent walking
     surface(read code forexception with special installation).k. Adjacent to
     stairways within 60 inches horizontally ofthebottom tread of a stairway in
     any direction when theexposed surface of the glass is less than 60 inches
     abovethe nose of the tread (read code for exception with
     specialinstallation).22. b. Provide a weep screed for stucco at the
     foundationplateline a minimum of 4 inches above the earth or 2 inchesabove
     paved areas. Weep screeds shall be of a typewhich will allow trapped water
     to drain to the exterior of thebuilding. (Show these dimensions on a
     foundation detaildrawing) (Section 2512.1.2)23. In Group R Occupancies,
     wall and floor- ceilingassemblies separating dwelling units or guest
     roomsfrom eachother and from public space such as interior corridorsand
     service areas shall provide airborne soundinsulation for walls,and both
     airborne and impact sound insulation forfloor-ceiling assemblies. All such
     separating walls andfloor-ceilingassemblies shall provide an airborne sound
     insulationequal to that required to meet a sound transmissionclass (STC) of
     50(Dn of 45 if field tested). All separating floor-ceiling shallprovide
     impact sound insulation equal to that required tomeet animpact insulation
     class (IIC) of 50 (FIIC of 45 if fieldtested). (1207.6.1, 1207.7,
     1207.8)Impact soundinsulation is not required for floor-ceiling
     assembliesover non habitable rooms or spaces notdesigned to be occupied,
     such as garages, mechanicalrooms or storage areas.a. Identify all sound
     rated partitions on the floor plans.b. Provide construction details for
     sound rated wallassemblies.c. Provide construction details for sound rated
     floor-ceilingassembliesd. All rigid conduits, ducts, plumbing pipes, and
     appliancevents located in sound assemblies shall be isolatedfrom the
     building construction by means of resilient sleeves,mounts, or a minimum
     1/4" thick approved resilientmaterial. Vents located in sound assemblies
     shall be isolated from thebuilding construction by means of resilient
     sleeves,mounts, or a minimum 1/4" thick approved resilient material.e. An
     approved permanent, and resilient acoustical sealantshall be provided along
     the joint between the floor andtheseparation walls. Floor-ceiling
     assemblies shall besealed, lined or insulatedwith________________________
     .f. Carpets or similar surface material which are part of thefloor-ceiling
     assembly must be installed and inspectedbeforethe Certificate of Occupancy
     is issued and may bereplaced only by other floor covering that provides
     therequiredimpact sound insulation. (1207.8)g. Metal ventilating and
     conditioned air ducts located insound assemblies shall be lined.
     (Exception: Ductsservingonly exit ways, kitchen cooking facilities, and
     bathroomsneed not be lined).h. Mineral fiber insulation shall be installed
     in joist spaceswhenever a plumbing piping, or duct penetrates
     afloor-ceilingassembly or where such unit passes through the planeof the
     floor-ceiling assembly from within a wall. Theinsulationshall be installed
     to a point 12" beyond the pipe or duct.This requirement is not applicable
     to fire sprinkler pipe,gasline or electrical conduit.i. Electrical outlet
     boxes in opposite faces of separationwalls shall be separated horizontally
     by 24" and notethat back and sides of boxes will be sealed with
     1/8"resilient sealant and backed by a minimum of 2" thickmineral
     fiberinsulation. (TV, telephone and intercom outlets must beinstalled in
     boxes accordingly.)The entrance doors to residential units from
     interiorcorridors are required to have a minimum STC rating of26.(Laminated
     1 3/8" solid-core doors with resilient stopsand gaskets or 18 gauge
     insulated steel slab doors withcompression seals all around, including
     thresholds willmeet this requirement).j. Wall mounted lavatories and
     toilets are not permitted insound rated partitions.k. Electrical panels are
     not permitted in sound ratedpartitions.24. The building is located where
     the annual Ldn or CNELExceeds 60 db. Provide acoustical analysis
     showingthat theproposed design will achieve prescribed allowableinterior25.
     1. All entry doors to dwelling units or guest rooms shallbe arranged so
     that the occupant has a view of the areaimmediately outsidethe door without
     opening the door. Such view may beprovided by a door viewer, through
     windows located inthe vicinity of the dooror through view ports in the door
     or adjoining wall.(6706)2. Screens, barricades, or fences made of a
     materialwhich would preclude human climbing shall be providedat every
     portion of everyroof, balcony, or similar surface which is within 8 ft.
     ofthe utility pole or access structures. (6707)3. Wood flush-type doors
     shall be 1 3/8" thick minimumwith solid core construction. (6709.1) Door
     stops ofin-swinging doors shallbe of one-piece construction with the jamb,
     or joined byrabbet to the jamb. (6709.4)4. Every door in a security opening
     for an apartment houseshall be provided with incandescent light bulb (60
     wattmin) at a maximumheight of 8 feet on the exterior side of the unit.
     (6708)5. All pin-type door hinges accessible from outside shallhave
     non-removable hinge pins. Hinges shall have min.1/4" dia. steel jambstud
     with 1/4" min. protection. The strike plate forlatches and holding device
     for projecting dead bolts inwood construction shall besecured to the jamb
     and the wall framing with screws noless than 2-1/2" long. (6709.5,
     6709.7)6. Provide dead bolts with hardened inserts; deadlockinglatch with
     key-operated locks on exterior. Doors must beoperable from theinside
     without a key, special knowledge, or special effort(latch not required in
     B, F, M and S occupancies).(6709.2)7. Straight dead bolts shall have a min.
     throw of 1" and anembedment of not less than 5/8", and a hook-shaped oran
     expanding-lugdeadbolt shall have a minimum throw of 3/4". (6709.2)8. Wood
     panel type doors must have panels at least 9/16inch thick with shaped
     portions of the panels not lessthan 1/4 inch thick, andindividual panels
     must be no more than 300 sq. in. inarea. Mullions shall be considered a
     part of adjacentpanels except mullionsnot over 18 inches long may have an
     overall width ofnot less than 2 inches. Stiles and rails shall be of
     solidlumber in thickness withoverall dimensions of not less than 1 3/8
     inches and 3inches in width. (6709.1 item 2)9. Sliding glass doors shall be
     provided with a device inthe upper channel of the moving panel to prohibit
     raisingand removal of themoving panel from the track while in the closed
     position.(6710)10. Sliding glass doors shall be equipped with
     lockingdevices and shall be so constructed and installed thatthey remain
     intact andengaged when subjected to the tests specified in Sec.6717.111.
     Metal or wooden overhead and sliding doors shall besecured with a cylinder
     lock, padlock with a min. 9/32"diameter hardenedsteel shackle bolted,
     hardened steel hasps, metal slideboard, bolt or equivalent device unless
     securedelectrically operated.(6711)12. Provide metal guides at top and
     bottom of metalaccordion grate or grille-type doors and cylinder locksor
     padlocks. Cylinder guardsshall be installed on all cylinder locks whenever
     thecylinder projects beyond the face of the door or isotherwise accessible
     to gripping (6712)13. In Group B, F, M, and S occupancies, panes of
     glazingwith at least one dimension greater than 6 in. but lessthan 48 in,
     shall beconstructed of tempered or approved burglary-resistantmaterial or
     protected with metal bars or grilles. (6714)14. Glazed openings within 40"
     of the door lock when thedoor is in the closed and locked position, shall
     be fullytempered glass orapproved burglary-resistant material, or shall
     beprotected by metal bars, screens or grilles having amaximum opening of
     2".The provisions of this section shall not apply to viewports or windows
     which do not exceed 2" in theirgreatest dimensions.(6713)15. Louvered
     windows shall be protected by metal bars orgrilles with openings that have
     at least one dimension of6" or less, whichare constructed to preclude human
     entry. (6715.3)16. Other openable windows shall be provided withsubstantial
     locking devices. In Group B, F, M and Soccupancies, such devices shallbe
     glide bars, bolts, cross-bars, and/or padlocks withminimum 9/32" hardened
     steel shackles and bolted,hardened steel hasps.(6715.2)17. Sliding windows
     shall be provided with locking device inthe upper channel of the moving
     panel to prohibit raisingand removal ofthe moving panel in the closed or
     partially openposition.(6715.1)18. Sliding windows shall be equipped with
     locking devicesand shall be so constructed and installed that theyremain
     intact and engagedwhen subjected to the tests specified in Sec. 6717.2.19.
     Any release for metal bars, grilles, grates or similardevices constructed
     to preclude human entry that areinstalled shall belocated on the inside of
     the adjacent room and at least24 inches from the closest opening through
     such metalbars, grilles, gratesor similar devices that exceeds two inches
     in anydimension. (6715.4)20. All other openings must be protected by metal
     bars orgrilles with openings of not less than 6 inches in onedimension.
     (6716)26. 1. A masonry or factory-built fireplace shall have thefollowing:
     [150.0(e)1]a. Closeable metal or glass doors covering the entireopening of
     the firebox;b. A combustion air intake to draw air from the outsideof the
     building directly into the firebox, which is atleast six square inches in
     area and is equippedwith a readily accessible, operable, and
     tight-fittingdamper or combustion-air control device(Exception: An outside
     combustion-air intake is notrequired if the fireplace will be installed
     overconcrete slab flooring and the fireplace will not belocated on an
     exterior wall.); andc. A flue damper with a readily accessible
     control.[150.0 (e)C]2. Heating or cooling systems shall be equipped with
     asetback thermostat that meet the requirements of Section110.2(c).
     [150.0(i)]3. Gas or propane water heaters shall have: [150.0(n)]a. A 120V
     electrical receptacle that is within 3 feetfrom the water heater.b. A
     Category III or IV vent, or a Type B vent withstraight pipe.c. Condensate
     drain that is no more than 2 incheshigher than the base.d. A gas supply
     line with a capacity of at least200,000 Btu/hr4. All pumps and pump motors
     installed shall be listed inthe Commission’s directory of certified
     equipment andshall comply with the Appliance EfficiencyRegulations.
     [150.0(p)1.A]5. The minimum installed weight per square foot of
     anyloose-fill insulation shall conform with the insulationmanufacturer's
     labeled R-value. [150.0 (b)]6. The minimum depth of concrete-slab floor
     perimeterinsulation shall be 16 inches or the depth of the footingof the
     building, whichever is less. [150.1(c)(1)(D)]7. The crawl space shall be
     covered with a vaporretarder over the entire floor. [150.1(c)1.D]8.
     Insulations are required for: [150.0(j)2.A]a. All hot water pipes from the
     heating source to thekitchen fixtures.b. All piping with a nominal diameter
     of 3/4 inch orlarger.c. The first 5 feet (1.5 meters) of hot and cold
     waterpipes from the storage tank.d. All piping associated with a domestic
     hot waterrecirculation system.e. Piping from the heating source to storage
     tank orbetween tanks.f. Piping buried below grade.9. Insulation shall be
     provided for water heaters asfollows:a. Unfired hot water tanks, such as
     storage tanks andbackup storage tanks for solar water-heatingsystems, shall
     be externally wrapped withinsulation having an installed thermal resistance
     ofR-12 or greater or have internal insulation of atleast R-16 and a label
     on the exterior of the tankshowing the insulation R-value. [150.0 (j)1]10.
     Lighting [150.0(k)]a. Installed luminaires shall be classified
     ashigh-efficacy in accordance with TABLE 150.0-A.b. Exhaust fans shall be
     switched separately fromlighting systems.c. Luminaries shall be switched
     with readilyaccessible controls that permit the luminaries to bemanually
     switched ON and OFF.d. Lighting installed in attached and detachedgarages,
     laundry rooms, and utility rooms, at leastone luminaire in each of these
     spaces shall becontrolled by vacancy sensors.e. Dimmers or vacancy sensors
     shall control allluminaires required to have light sources compliantwith
     Reference Joint Appendix JA8.EXCEPTION 1: Luminaires in closets less than
     70square feet.EXCEPTION 2: Luminaires in hallways.f. A. In a low-rise
     multifamily residential buildingwhere the total interior common area in a
     singlebuilding equals 20 percent or less of the floor area,permanently
     installed lighting for the interiorcommon areas in that building shall be
     highefficacy luminaires or controlled by an occupantsensor.g. In a low-rise
     multifamily residential building wherethe total interior common area in a
     single buildingequals more than 20 percent of the floor area,permanently
     installed lighting in that building shall:i) Comply with the applicable
     requirements inSections 110.9, 130.0, 130.1, 140.6 and141.0; andii)
     Lighting installed in corridors and stairwellsshall be controlled by
     occupant sensors thatreduce the lighting power in each space by atleast 50
     percent. The occupant sensors shallbe capable of turning the light fully On
     and Offfrom all designed paths of ingress and egress.27. 5. All systems,
     equipment, appliances and buildingcomponents shall comply with the
     applicablemanufacturing, construction, and installationprovisions of
     Sections 110.0 through 110.11 for newlyconstructed buildings.6. Any
     appliance regulated by the Appliance EfficiencyRegulations, Title 20
     California Code of Regulations,Section 1601 et seq., may be installed only
     if theappliance fully complies with Section 1608(a) of thoseregulations.
     [110.1(a)]7. Service water-heating systems shall be equipped withautomatic
     temperature controls capable of adjustmentfrom the lowest to the highest
     acceptable temperaturesettings for the intended use as listed in Table
     3,Chapter 50 of the ASHRAE Handbook, HVACApplications Volume. [110.3(a)1]8.
     On systems that have a total capacity greater than167,000 Btu/hr, outlets
     that require higher thanservice water temperatures as listed in the
     ASHRAEHandbook, Applications Volume, shall have separateremote heaters,
     heat exchangers, or boosters tosupply the outlet with the higher
     temperature.[110.3(c)1]9. Service hot water systems with circulating pumps
     orwith electrical heat trace systems shall be capable ofautomatically
     turning off the system. [110.3(c)2]10. Controls for service water-heating
     systems shall limitthe outlet temperature at public lavatories to
     110°F.[110.3(c)3]11. Unfired service water-heater storage tanks andbackup
     tanks for solar water-heating systems shall have:a. External insulation
     with an installed R-value of atleast R-12, orb. Internal and external
     insulation with a combinedR-value of at least R-16, orc. The heat loss of
     the tank surface based on an 80°Fwater-air temperature difference shall be
     less than6.5 Btu/hr per square foot. [110.3 (c)4]12. For Nonresidential,
     high-rise residential, andhotel/motel buildings, space conditioning
     systemsshall meet the efficiency standards specified Section120.2.13.
     Continuously burning pilot light shall be prohibited forthe following
     natural gas system or equipment listedbelow: [110.5]a. Fan-type central
     furnacesb. Household cooking appliances, except for householdcooking
     appliances without an electricalsupply voltage connection and in which each
     pilotconsumes less than 150 Btu/hrc. Pool heatersd. Spa heaters14. Any pool
     or spa heating system or equipment shall:[110.4]a. A thermal efficiency
     that complies with theAppliance Efficiency Regulationsb. Have a readily
     accessible on-off switch, mountedon the outside of the heater that allows
     shutting offthe heater without adjusting the thermostat setting.c. Not
     utilize electric resistance heating.d. Have a cover for outdoor pools or
     spas that have aheat pump or gas heater.e. Have a permanent, easily
     readable, andweatherproof instruction card that givesinstructions for the
     energy efficient operation of thepool or spa heater and for the proper care
     of poolor spa water when a cover is used.f. Have at least 36 inches of pipe
     installed betweenthe filter and heater or dedicated suction and
     returnlines, or built-in or built-up connections shall beinstalled to allow
     for the future addition of solarheating equipment.g. Have directional
     inlets for the pool or spa thatadequately mix the pool water.h. A time
     switch or similar control mechanism shall beinstalled as part of a pool
     water circulation controlsystem that will allow all pumps to be set
     orprogrammed to run only during the off-peak electricdemand period and for
     the minimum timenecessary to maintain the water in the conditionrequired by
     applicable public health standards.15. Manufactured fenestration products
     and exteriordoors shall have air infiltration rates not exceeding
     0.3cfm/ft2of window area, 0.3 cfm/ft2of residential doorarea, 0.3 cfm/ft2of
     nonresidential single door area,and 1.0 cfm/ft2of nonresidential double
     door area.[110.6(a)1]16. Fenestration products shall be rated in
     accordancewith NFRC 100 for U-factor, NFRC 200 for SHGC, andVT or use the
     applicable default value. Fenestrationproducts shall have a temporary label
     formanufactured fenestration products or a labelcertificate when the
     Component Modeling Approach isused and for site-built fenestration meeting
     therequirements of Section 10-111(a)1. [110.6(a)2,110.6(a)3, 110.6(a)4,
     110.6(a)5]17. Field-fabricated fenestration products and exteriordoors,
     other than unframed glass doors and fire doors,shall be caulked between the
     fenestration products orexterior door and the building, and shall be
     weatherstripped.[110.6(b)]STRUCTURAL NOTES:1. Contractors responsible for
     the construction of a wind or seismic forceresisting system/component
     listed in the Statement ofSpecial Inspection shall submit a written
     statement of responsibility to the LADBSInspectors and the owner prior to
     thecommencement of work on such system or component per Sec 1704.4.2.
     Continuous Special Inspection by a registered deputy inspector is required
     forfield welding, post-installed adhesive anchorsinstalled horizontally or
     upwardly inclined to resist sustained tension loads,shotcrete placement,
     concrete strength f=c > 2500 psi,sprayed-on fireproofing, engineered
     masonry, high-lift grouting, high loaddiaphragms, special moment-resisting
     concrete frames,and helical pile foundations. (1705 & Chapters 19, 21, and
     22)3. Foundation sills shall be naturally durable or preservative-treated
     wood.(2304.12.1.4)4. Field Welding to be done by welders certified by the
     LADBS for (structuralsteel)(reinforcing steel)(light gauge steel).
     Continuousinspection by a deputy inspector is required.5. Shop welds must
     be performed in a LADBS licensed fabricator shop.6. LADBS licensed
     fabricator is required for (Trusses), (Structural
     Steel),_________________________.7. Glued-laminated timbers must be
     fabricated in a LADBS licensed shop.Identify grade symbol and lamination
     species per 2015NDS Supplement Table 5A.8. Provide lead hole 40% - 70% of
     threaded shank diameter and full diameter forsmooth shank portion.9.
     Periodic Special Inspection is required for wood shear walls, shear
     panels,and diaphragms, including nailing, bolting, anchoring,and other
     fastening to components of the seismic force resisting system.
     Specialinspection by a deputy inspector is requiredwhere the fastener
     spacing of the sheathing is 4 inches on center or
     less.(1705.12.2)10.Special activity inspection is required for (buildings
     over 5 stories or 60' inheight) (buildings over 50,000 sq. ft. of ground
     floor area (buildings over200,000 sq. ft. of total floor area)11. A copy of
     the Los Angeles Research Report and/or conditions of listing shallbe made
     available at the job site.12.If adverse soil conditions are encountered, a
     soils investigation report may berequired.13.Hold-down connector bolts into
     wood framing require approved plate washers;and hold-downs shall be finger
     tight and wrench14.turned just prior to covering the wall framing.
     Connector bolts into woodframing require steel plate washers on the post on
     the15.opposite side of the anchorage device. Plate size shall be a minimum
     of 0.299inch by 3 inches by 3 inches.16.(2305.5)17.2. Roof diaphragm
     nailing to be inspected before covering. Face grain ofplywood shall be
     perpendicular to supports. Floor shall have18.tongue and groove or blocked
     panel edges. Plywood spans shall conform withTable 2304.8(1).19.3. All
     diaphragm and shear wall nailing shall utilize common nails orgalvanized
     box.20.4. All bolt holes shall be drilled 1/32" to 1/16" oversized.
     (12.1.3.2, NDS)21.5. Hold-down hardware must be secured in place prior to
     foundationinspection.REVISIONSBYSHAWN CONSULTING A-1.61528 EAST VERNON ST
     23 UNIT APARTMENTADDRESS:LOS ANGELES, CA 90011OWNER:
     
 8.  
     ENERGY STAR SPECSREVISIONSBYSHAWN CONSULTING A-1.71528 EAST VERNON ST 23
     UNIT APARTMENTADDRESS:LOS ANGELES, CA 90011OWNER:
     
 9.  
     3'-6"1'-6"13'-0"3'-8"3'-8"2'-0"3'-0"10'-4"3'-0"1'-10"9'-6"4'-0"ø5'-0"A-1.8REVISIONSBYENLARGED
     ADA UNITSHAWN CONSULTING 23 UNIT APARTMENTS LOS ANGELES, CA 900111528 EAST
     VERNON ST ADDRESS:OWNER:DRAWING LEGEND- INTERIOR PARTITION WALL- 2 HR FIRE
     RATED SHAFT- 1 HR FIRE - STC 56 RATED WALLSEE WALL ASSEMBLY DETAIL ON PAGE
     A1.5DRAWING LEGENDCMMVCARBON MONOXIDE DETECTORSMOKE DETECTORSDENERGY STAR
     EXHAUST FAN. COMPLIANT AND BEDUCTED TO TERMINATE TO THE OUTSIDE OF
     THEBUILDING. FAN, NOT FUNCTIONING AS A COMPONENTOF A WHOLE HOUSE
     VENTILATION SYSTEM, MUST BECONTROLLED BY A HUMIDITY CONTROL 50 CFM MINNOTE
     TO CONTRACTOR:CONTRACTOR TO VERIFY ALL CONDITIONS IN THE FIELD.THESE PLANS
     SERVE AS GUIDELINE FORCONSTRUCTION AND FIELD CONDITIONS MAY VARY ANDTAKE
     PRECEDENCE. WE ARE NOT HELD RESPONSIBLEUNDER ANY CONDITION FOR
     CONTRACTOR'SPERFORMANCE IN THE CONSTRUCTION AND ORMANAGEMENT OF THIS
     PROJECT AND FOR ANYDISCREPANCIES THAT MAY ARISE FROM THESE PLANS.1. ALL NEW
     GLAZING WILL BE INSTALLED WITH CERTIFYINGLABEL ATTACHED, SHOWING
     U-VALUE.2.PIPING FOR RECIRCULATING WATER HEATING SYSTEM ISREQUIRED TO
     INSULATE FOR THE ENTIRE LENGTH REGARDLESSOF LOCATION PER SECTION 150
     (j)2.3. LIGHTING IN KITCHENS SHALL HAVE LAMPS PROVIDING A MIN.OF 40 WATT
     (NO COMPACT FLUORESCENT). A FIXTURE WHICH ISTHE ONLY LIGHTING IN THE
     KITCHEN WILL BE CONSIDEREDGENERAL LIGHTING. GENERAL LIGHTING SHALL BE
     CONTROLLEDBY THE MOST ACCESSABLE SWITCH.4. FLUORESCENT FIXTURES SHALL NOT
     CONTAIN MEDIUM BASEINCANDESCENT LAMP SOCKET AND SHALL BE ON
     SEPARATESWITCHES FROM ANY INCANDESCENT LIGHTING.GENERAL REQUIREMENTS &
     NOTES:1. TOILET ROOM FLOORS SHALL HAVE A SMOOTH, HARD NON-ABSORBENT SURFACE
     SUCH AS PORTLAND CEMENT, CERAMICTILE OR OTHER APPROVED MATERIAL THAT
     EXTENDS UPWARDONTO THE WALLS AT LEAST 5 INCHES.2. ATTIC (WITH OVER 30"
     HEADROOM) MUST HAVE ACCESSOPENING (22"x30" MIN.).3. AN APPROVED SEISMIC GAS
     SHUTOFF VALVE WILL BEINSTALLED ON THE FUEL GAS LINE ON THE DOWN STREAM
     SIDEOF THE UTILITY METER AND BE RIGIDLY CONNECTED TO THEEXTERIOR OF THE
     BUILDING OR STRUCTURE CONTAINING THEFUEL GAS PIPING.4. GLAZING IN HAZARDOUS
     LOCATIONS SHALL BE TEMPERED.5.PROVIDE ULTRA FLUSH WATER CLOSETS FOR ALL
     NEWCONSTRUCTION.6. PROVIDE 70 INCH HIGH NON-ABSORBENT WALL ADJACENTTO
     SHOWER AND APPROVED SHATTER-RESISTANT MATERIALSFOR SHOWER ENCLOSURE.7.
     WATER HEATER MUST BE STRAPPED TO WALL.5. ALL INCANDESCENT LIGHTING FIXTURES
     RECESSED INTOINSULATED CEILINGS SHALL BE APPROVED FOR ZERO
     CLEARANCEINSULATION COVER (TYPE IC) BY UL OR OTHER APPROVED LABS6. ALL
     SHADING DEVICES MUST BE INSTALLED PRIOR TOFINAL INSPECTION.7. IN SHOWERS
     AND TUB-SHOWER COMBINATIONS, CONTROL VALVESMUST BE PRESSURE BALANCED OR
     THERMOSTATIC MIXING VALVES8. WATER CLOSETS AND ASSOCIATED FLUSHOMETER
     VALVES SHALL USENO MORE THAN 1.28 GALLONS PER FLUSH AND SHALL
     MEETPERFORMANCE STANDARDS ESTABLISHED BY THE AMERICANNATIONAL STANDARDS
     INSTITUTE STANDARD A112.19.2RESIDENTIAL ENERGY REQUIREMENTS: RESIDENTIAL
     ENERGY REQUIREMENTS: NOTE:ALL RATED DOORS MUST BE EITHER SELF-CLOSING OR
     AUTOMATIC - CLOSING .VENTILATION CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR
     AREA x 4%= ALLOWABLE VENTILATION128 x 0.04 = 5.1 Sq.Ft.REQUIRED= 5.1
     Sq.Ft.PROVIDED= 20 Sq.Ft.LIGHT CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR AREA
     x 8%= ALLOWABLE LIGHT128 x 0.08 = 10.2 Sq.Ft.REQUIRED= 10.2 Sq.Ft.PROVIDED=
     20 Sq.Ft.1- 30" X 48" MINIMUM CLEAR FLOOR SPACE ADJACENT TO RANGE TOALLOW
     PARALLEL APPROACH.2- 30" MIN. SPACE FOR SINK INSTALLATION WITH REMOVABLE
     BASECABINET PER SEC 1133A.3; 30" X 48" MIN. CLEAR FLOOR SPACE TOALLOW
     EITHER FORWARD OR PARALLEL APPROACH. KNEE & TOECLEARANCE PER FIG. 11A-9D ON
     DA1.9.3- 30" MINIMUM COUNTERTOP SPACE FOR WORK SURFACE WITHREMOVABLE BASE
     CABINET AND FINISH FLOORING BENEATH THESINK; 30" X 48" MINIMUM CLEAR FLOOR
     SPACE TO ALLOW EITHERFORWARD R PARALLEL APPROACH.4- BASE CABINET FOR
     STORAGE MAX. DEPTH 24".5-NO BASE CABINET & SINK TOP OF FIXTURE RIM REQUIRED
     TO BE34" MAX. HEIGHT. WATER SUPPLY AND DRAIN PIPES SHALL BEINSULATED OR
     OTHERWISE COVERED TO PROTECT AGAINSTCONTACT. THERE SHALL BE NO SHARP OR
     ABRASIVE SURFACESUNDER LAVATORIES PER FIG. 11A-9D ON DA1.9.6- GRAB BAR
     REINFORCEMENT PER SHEET DA1.10 FIG. 11A-9G(a).TOILET SIDE GRAB BAR TO BE
     WALL HUNG.7- ARTIFICIAL LIGHTING TO BE INSTALLED TO ACHIEVE AN
     AVERAGEILLUMINATION OF 10 FOOT CANDLES OVER THE AREA OF THE ROOMAT 30
     INCHES ABOVE FLOOR LEVEL.8- MECHANICAL VENTILATION TO BE PROVIDED PER
     CALIFORNIAMECHANICAL CODE.9- GRAB BAR REINFORCEMENT PER SHEET DA1.10 FIG.
     11A-9G(b)(c).SUPPLEMENTAL NOTES:1'-6"3'1'2'3'TOP OF GRAB BARGRIPPING
     SURFACE36" MIN. GRAB BAR12" MIN.24" MIN.FLUSH ACTIVATOR ONTRANSFER
     SIDETRANSFERSIDE42" MIN. GRAB BARTOP OF GRAB BARGRIPPING SURFACETRANSFER
     SIDE1'12" MAX.3'-6"2'3'24" MIN.4'-6"54" MIN.0'-8"7"-9"1'-7"1'-6"33"-36"33"
     MIN.17"-19"3'-4"DISPENSER'S 40" MAX TOHIGHEST OPERABLE PARTREAR WALL GRAB
     BAR AT WATER CLOSETSIDE WALL GRAB BAR AT WATER CLOSETPOCKET DOOR
     REQUIREMENTS & NOTES:1. POCKET DOOR SHALL USE HARDWARE THAT IS
     ADAAPPROVED2. POCKET DOOR SHALL PROVIDE A 42" X 58" CLEARANCE
     FROMENTERANCE3. POCKET DOOR SHALL HAVE A 32" MIN OPENINGDOOR
     NO.SIZEFRAMEMATERIALDOORTYPED1PROPOSED DOOR SCHEDULEREMARKSSINGLE 36" X 96"
     X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR TO UNITSD2SINGLE 36" X 96" X
     1 3/4"HOLLOW COREWOOD SWINGBEDROOMSD4SINGLE 36" X 96" X 1 3/4"SOLID
     COREWOOD SWINGSTAIR CASE 2HR FIRE RATEDSINGLE 36" X 96" X 1 3/4" SOLID CORE
     WOOD SWING MAIN ENTRY DOOR TO BUILDING FIRE RATING(MIN.)60602060D5D6DOUBLE
     48" X 96" X 1 3/4" SOLID CORE STEEL SWING ENTRY TO TRASH ROOMD7SINGLE 36" X
     80" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR TO UNITSD9SINGLE 36" X
     80" X 1 3/4"HOLLOW COREWOOD SWINGBEDROOMSSINGLE 36" X 80" X 1 3/4"HOLLOW
     COREWOOD POCKETBATHROOMS606060D3 SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS60D8D10 SINGLE 36" X 80" X 1 3/4"SOLID CORESTEEL
     SLIDEELEVATORD2BEDROOMSDWHW4SAMPLEADA UNIT418
     S.F.CMSDFRIDGED1W1GBGBGBGBGBD3W2MVNO CABINETSPROVIDEDUNDERNEATH SINKMAX
     HEIGHTSHALL BE 34"SHOWERSHALL BE 36"WIDTH AND60" LENGTHGRAB BARS SHALLBE
     PROVIDEDAROUND SHOWERAND WATER CLOSET(SIDE = 42" MIN &REAR = 36" MIN)NO
     DOORSHALL BEPROVIDEDFOR SHOWERCABINETSUNDERNEATHSINK SHALL
     BEREMOVABLECOUNTERTOPS SHALLBE STONE, MARBLE ORLIKE MATERIALS ANDHAVE A MAX
     HEIGHT OF36"WDW. NO.SIZEPROPOSED WINDOW SCHEDULETYPEREMARKSW2W15' W X 4'
     HDUAL GLAZED SLIDER3' W X 18" HDUAL GLAZED SLIDERTEMPERED GLASSFIRE RATING
     (MIN.)454560 - FIRE RESISTANT GLAZINGTESTED TO ASTM E119 OR UL263 .W33' W X
     7' HDUAL GLAZED SLIDERTEMPERED GLASSW44' W X 4' HDUAL GLAZED SLIDER45W5.5'
     W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW61.5' W X 14' HDUAL GLAZED
     FIXEDTEMPERED GLASSW75.5' W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW89' W X
     14' HDUAL GLAZED FIXEDTEMPERED GLASSW95' W X 8' HDUAL GLAZED FIXEDTEMPERED
     GLASSREINFORCED WALLSSHALL BE REQUIRED FORALL WALLS WITH GRABBARSREINFORCED
     WALLSSHALL BE REQUIRED FORALL WALLS WITH GRABBARS
     
 10. 
     3'-6"1'-6"9'-6"13'-0"3'-0"1'-10"2'-6"2'-6"2'-6"5'-1"2'-6"1'-9"ø5'-0"4'-0"A-1.81REVISIONSBYENLARGED
     ADA UNITSHAWN CONSULTING 23 UNIT APARTMENTS LOS ANGELES, CA 900111528 EAST
     VERNON ST ADDRESS:OWNER:DRAWING LEGEND- INTERIOR PARTITION WALL- 2 HR FIRE
     RATED SHAFT- 1 HR FIRE - STC 56 RATED WALLSEE WALL ASSEMBLY DETAIL ON PAGE
     A1.5DRAWING LEGENDCMMVCARBON MONOXIDE DETECTORSMOKE DETECTORSDENERGY STAR
     EXHAUST FAN. COMPLIANT AND BEDUCTED TO TERMINATE TO THE OUTSIDE OF
     THEBUILDING. FAN, NOT FUNCTIONING AS A COMPONENTOF A WHOLE HOUSE
     VENTILATION SYSTEM, MUST BECONTROLLED BY A HUMIDITY CONTROL 50 CFM MINNOTE
     TO CONTRACTOR:CONTRACTOR TO VERIFY ALL CONDITIONS IN THE FIELD.THESE PLANS
     SERVE AS GUIDELINE FORCONSTRUCTION AND FIELD CONDITIONS MAY VARY ANDTAKE
     PRECEDENCE. WE ARE NOT HELD RESPONSIBLEUNDER ANY CONDITION FOR
     CONTRACTOR'SPERFORMANCE IN THE CONSTRUCTION AND ORMANAGEMENT OF THIS
     PROJECT AND FOR ANYDISCREPANCIES THAT MAY ARISE FROM THESE PLANS.1. ALL NEW
     GLAZING WILL BE INSTALLED WITH CERTIFYINGLABEL ATTACHED, SHOWING
     U-VALUE.2.PIPING FOR RECIRCULATING WATER HEATING SYSTEM ISREQUIRED TO
     INSULATE FOR THE ENTIRE LENGTH REGARDLESSOF LOCATION PER SECTION 150
     (j)2.3. LIGHTING IN KITCHENS SHALL HAVE LAMPS PROVIDING A MIN.OF 40 WATT
     (NO COMPACT FLUORESCENT). A FIXTURE WHICH ISTHE ONLY LIGHTING IN THE
     KITCHEN WILL BE CONSIDEREDGENERAL LIGHTING. GENERAL LIGHTING SHALL BE
     CONTROLLEDBY THE MOST ACCESSABLE SWITCH.4. FLUORESCENT FIXTURES SHALL NOT
     CONTAIN MEDIUM BASEINCANDESCENT LAMP SOCKET AND SHALL BE ON
     SEPARATESWITCHES FROM ANY INCANDESCENT LIGHTING.GENERAL REQUIREMENTS &
     NOTES:1. TOILET ROOM FLOORS SHALL HAVE A SMOOTH, HARD NON-ABSORBENT SURFACE
     SUCH AS PORTLAND CEMENT, CERAMICTILE OR OTHER APPROVED MATERIAL THAT
     EXTENDS UPWARDONTO THE WALLS AT LEAST 5 INCHES.2. ATTIC (WITH OVER 30"
     HEADROOM) MUST HAVE ACCESSOPENING (22"x30" MIN.).3. AN APPROVED SEISMIC GAS
     SHUTOFF VALVE WILL BEINSTALLED ON THE FUEL GAS LINE ON THE DOWN STREAM
     SIDEOF THE UTILITY METER AND BE RIGIDLY CONNECTED TO THEEXTERIOR OF THE
     BUILDING OR STRUCTURE CONTAINING THEFUEL GAS PIPING.4. GLAZING IN HAZARDOUS
     LOCATIONS SHALL BE TEMPERED.5.PROVIDE ULTRA FLUSH WATER CLOSETS FOR ALL
     NEWCONSTRUCTION.6. PROVIDE 70 INCH HIGH NON-ABSORBENT WALL ADJACENTTO
     SHOWER AND APPROVED SHATTER-RESISTANT MATERIALSFOR SHOWER ENCLOSURE.7.
     WATER HEATER MUST BE STRAPPED TO WALL.5. ALL INCANDESCENT LIGHTING FIXTURES
     RECESSED INTOINSULATED CEILINGS SHALL BE APPROVED FOR ZERO
     CLEARANCEINSULATION COVER (TYPE IC) BY UL OR OTHER APPROVED LABS6. ALL
     SHADING DEVICES MUST BE INSTALLED PRIOR TOFINAL INSPECTION.7. IN SHOWERS
     AND TUB-SHOWER COMBINATIONS, CONTROL VALVESMUST BE PRESSURE BALANCED OR
     THERMOSTATIC MIXING VALVES8. WATER CLOSETS AND ASSOCIATED FLUSHOMETER
     VALVES SHALL USENO MORE THAN 1.28 GALLONS PER FLUSH AND SHALL
     MEETPERFORMANCE STANDARDS ESTABLISHED BY THE AMERICANNATIONAL STANDARDS
     INSTITUTE STANDARD A112.19.2RESIDENTIAL ENERGY REQUIREMENTS: RESIDENTIAL
     ENERGY REQUIREMENTS: VENTILATION CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR
     AREA x 4%= ALLOWABLE VENTILATION128 x 0.04 = 5.1 Sq.Ft.REQUIRED= 5.1
     Sq.Ft.PROVIDED= 20 Sq.Ft.LIGHT CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR AREA
     x 8%= ALLOWABLE LIGHT128 x 0.08 = 10.2 Sq.Ft.REQUIRED= 10.2 Sq.Ft.PROVIDED=
     20 Sq.Ft.1- 30" X 48" MINIMUM CLEAR FLOOR SPACE ADJACENT TO RANGE TOALLOW
     PARALLEL APPROACH.2- 30" MIN. SPACE FOR SINK INSTALLATION WITH REMOVABLE
     BASECABINET PER SEC 1133A.3; 30" X 48" MIN. CLEAR FLOOR SPACE TOALLOW
     EITHER FORWARD OR PARALLEL APPROACH. KNEE & TOECLEARANCE PER FIG. 11A-9D ON
     DA1.9.3- 30" MINIMUM COUNTERTOP SPACE FOR WORK SURFACE WITHREMOVABLE BASE
     CABINET AND FINISH FLOORING BENEATH THESINK; 30" X 48" MINIMUM CLEAR FLOOR
     SPACE TO ALLOW EITHERFORWARD R PARALLEL APPROACH.4- BASE CABINET FOR
     STORAGE MAX. DEPTH 24".5-NO BASE CABINET & SINK TOP OF FIXTURE RIM REQUIRED
     TO BE34" MAX. HEIGHT. WATER SUPPLY AND DRAIN PIPES SHALL BEINSULATED OR
     OTHERWISE COVERED TO PROTECT AGAINSTCONTACT. THERE SHALL BE NO SHARP OR
     ABRASIVE SURFACESUNDER LAVATORIES PER FIG. 11A-9D ON DA1.9.6- GRAB BAR
     REINFORCEMENT PER SHEET DA1.10 FIG. 11A-9G(a).TOILET SIDE GRAB BAR TO BE
     WALL HUNG.7- ARTIFICIAL LIGHTING TO BE INSTALLED TO ACHIEVE AN
     AVERAGEILLUMINATION OF 10 FOOT CANDLES OVER THE AREA OF THE ROOMAT 30
     INCHES ABOVE FLOOR LEVEL.8- MECHANICAL VENTILATION TO BE PROVIDED PER
     CALIFORNIAMECHANICAL CODE.9- GRAB BAR REINFORCEMENT PER SHEET DA1.10 FIG.
     11A-9G(b)(c).SUPPLEMENTAL NOTES:1'-6"3'1'2'3'TOP OF GRAB BARGRIPPING
     SURFACE36" MIN. GRAB BAR12" MIN.24" MIN.FLUSH ACTIVATOR ONTRANSFER
     SIDETRANSFERSIDE42" MIN. GRAB BARTOP OF GRAB BARGRIPPING SURFACETRANSFER
     SIDE1'12" MAX.3'-6"2'3'24" MIN.4'-6"54" MIN.0'-8"7"-9"1'-7"1'-6"33"-36"33"
     MIN.17"-19"3'-4"DISPENSER'S 40" MAX TOHIGHEST OPERABLE PARTREAR WALL GRAB
     BAR AT WATER CLOSETSIDE WALL GRAB BAR AT WATER CLOSETPOCKET DOOR
     REQUIREMENTS & NOTES:1. POCKET DOOR SHALL USE HARDWARE THAT IS
     ADAAPPROVED2. POCKET DOOR SHALL PROVIDE A 42" X 58" CLEARANCE
     FROMENTERANCE3. POCKET DOOR SHALL HAVE A 32" MIN OPENINGDOOR
     NO.SIZEFRAMEMATERIALDOORTYPED1PROPOSED DOOR SCHEDULEREMARKSSINGLE 36" X 96"
     X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR TO UNITSD2SINGLE 36" X 96" X
     1 3/4"HOLLOW COREWOOD SWINGBEDROOMSD4SINGLE 36" X 96" X 1 3/4"SOLID
     COREWOOD SWINGSTAIR CASE 2HR FIRE RATEDSINGLE 36" X 96" X 1 3/4" SOLID CORE
     WOOD SWING MAIN ENTRY DOOR TO BUILDING FIRE RATING(MIN.)60602060D5D6DOUBLE
     48" X 96" X 1 3/4" SOLID CORE STEEL SWING ENTRY TO TRASH ROOMD7SINGLE 36" X
     80" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR TO UNITSD9SINGLE 36" X
     80" X 1 3/4"HOLLOW COREWOOD SWINGBEDROOMSSINGLE 36" X 80" X 1 3/4"HOLLOW
     COREWOOD POCKETBATHROOMS606060D3 SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS60D8D10 SINGLE 36" X 80" X 1 3/4"SOLID CORESTEEL
     SLIDEELEVATORD2BEDROOMSDW1SDCMADA UNIT107338
     S.F.MVGBGBGBD3W2WHFRIDGED1W4GBGBNO CABINETSPROVIDEDUNDERNEATH SINKMAX
     HEIGHTSHALL BE 34"SHOWERSHALL BE 36"WIDTH AND60" LENGTHNO DOORSHALL
     BEPROVIDEDFOR SHOWERCABINETSUNDERNEATHSINK SHALL BEREMOVABLECOUNTERTOPS
     SHALLBE STONE, MARBLE ORLIKE MATERIALS ANDHAVE A MAX HEIGHT OF36"NOTE:ALL
     RATED DOORS MUST BE EITHER SELF-CLOSING OR AUTOMATIC - CLOSING .WDW.
     NO.SIZEPROPOSED WINDOW SCHEDULETYPEREMARKSW2W15' W X 4' HDUAL GLAZED
     SLIDER3' W X 18" HDUAL GLAZED SLIDERTEMPERED GLASSFIRE RATING (MIN.)454560
     - FIRE RESISTANT GLAZINGTESTED TO ASTM E119 OR UL263 .W33' W X 7' HDUAL
     GLAZED SLIDERTEMPERED GLASSW44' W X 4' HDUAL GLAZED SLIDER45W5.5' W X 14'
     HDUAL GLAZED FIXEDTEMPERED GLASSW61.5' W X 14' HDUAL GLAZED FIXEDTEMPERED
     GLASSW75.5' W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW89' W X 14' HDUAL
     GLAZED FIXEDTEMPERED GLASSW95' W X 8' HDUAL GLAZED FIXEDTEMPERED
     GLASSREINFORCED WALLSSHALL BE REQUIRED FORALL WALLS WITH GRABBARSREINFORCED
     WALLSSHALL BE REQUIRED FORALL WALLS WITH GRABBARSGRAB BARS SHALLBE
     PROVIDEDAROUND SHOWERAND WATER CLOSET(SIDE = 42" MIN &REAR = 36" MIN)
     
 11. 
     1'-11"3'-8"3'-8"3'-8"3'-8"5'-0"7'-0"9'-0"9'-0"11'-0"5'-9"4'-0"1'-3"ø5'-0"REVISIONSBYENLARGED
     STAIRS/ELEVATORSHAWN CONSULTING 23 UNIT APARTMENTS LOS ANGELES, CA
     900111528 EAST VERNON ST ADDRESS:OWNER:DRAWING LEGEND- INTERIOR PARTITION
     WALL- 2 HR FIRE RATED SHAFT- 1 HR FIRE - STC 56 RATED WALLSEE WALL ASSEMBLY
     DETAIL ON PAGE A1.5DRAWING LEGENDCMMVCARBON MONOXIDE DETECTORSMOKE
     DETECTORSDENERGY STAR EXHAUST FAN. COMPLIANT AND BEDUCTED TO TERMINATE TO
     THE OUTSIDE OF THEBUILDING. FAN, NOT FUNCTIONING AS A COMPONENTOF A WHOLE
     HOUSE VENTILATION SYSTEM, MUST BECONTROLLED BY A HUMIDITY CONTROL 50 CFM
     MINNOTE TO CONTRACTOR:CONTRACTOR TO VERIFY ALL CONDITIONS IN THE
     FIELD.THESE PLANS SERVE AS GUIDELINE FORCONSTRUCTION AND FIELD CONDITIONS
     MAY VARY ANDTAKE PRECEDENCE. WE ARE NOT HELD RESPONSIBLEUNDER ANY CONDITION
     FOR CONTRACTOR'SPERFORMANCE IN THE CONSTRUCTION AND ORMANAGEMENT OF THIS
     PROJECT AND FOR ANYDISCREPANCIES THAT MAY ARISE FROM THESE PLANS.1. ALL NEW
     GLAZING WILL BE INSTALLED WITH CERTIFYINGLABEL ATTACHED, SHOWING U-VALUE.2.
     PIPING FOR RECIRCULATING WATER HEATING SYSTEM ISREQUIRED TO INSULATE FOR
     THE ENTIRE LENGTH REGARDLESSOF LOCATION PER SECTION 150 (j)2.3. LIGHTING IN
     KITCHENS SHALL HAVE LAMPS PROVIDING A MIN.OF 40 WATT (NO COMPACT
     FLUORESCENT). A FIXTURE WHICH ISTHE ONLY LIGHTING IN THE KITCHEN WILL BE
     CONSIDEREDGENERAL LIGHTING. GENERAL LIGHTING SHALL BE CONTROLLEDBY THE MOST
     ACCESSABLE SWITCH.4. FLUORESCENT FIXTURES SHALL NOT CONTAIN MEDIUM
     BASEINCANDESCENT LAMP SOCKET AND SHALL BE ON SEPARATESWITCHES FROM ANY
     INCANDESCENT LIGHTING.GENERAL REQUIREMENTS & NOTES:1. TOILET ROOM FLOORS
     SHALL HAVE A SMOOTH, HARD NON-ABSORBENT SURFACE SUCH AS PORTLAND CEMENT,
     CERAMICTILE OR OTHER APPROVED MATERIAL THAT EXTENDS UPWARDONTO THE WALLS AT
     LEAST 5 INCHES.2. ATTIC (WITH OVER 30" HEADROOM) MUST HAVE ACCESSOPENING
     (22"x30" MIN.).3. AN APPROVED SEISMIC GAS SHUTOFF VALVE WILL BEINSTALLED ON
     THE FUEL GAS LINE ON THE DOWN STREAM SIDEOF THE UTILITY METER AND BE
     RIGIDLY CONNECTED TO THEEXTERIOR OF THE BUILDING OR STRUCTURE CONTAINING
     THEFUEL GAS PIPING.4. GLAZING IN HAZARDOUS LOCATIONS SHALL BE TEMPERED.5.
     PROVIDE ULTRA FLUSH WATER CLOSETS FOR ALL NEWCONSTRUCTION.6. PROVIDE 70
     INCH HIGH NON-ABSORBENT WALL ADJACENTTO SHOWER AND APPROVED
     SHATTER-RESISTANT MATERIALSFOR SHOWER ENCLOSURE.7. WATER HEATER MUST BE
     STRAPPED TO WALL.5. ALL INCANDESCENT LIGHTING FIXTURES RECESSED
     INTOINSULATED CEILINGS SHALL BE APPROVED FOR ZERO CLEARANCEINSULATION COVER
     (TYPE IC) BY UL OR OTHER APPROVED LABS6. ALL SHADING DEVICES MUST BE
     INSTALLED PRIOR TOFINAL INSPECTION.7. IN SHOWERS AND TUB-SHOWER
     COMBINATIONS, CONTROL VALVESMUST BE PRESSURE BALANCED OR THERMOSTATIC
     MIXING VALVES8. WATER CLOSETS AND ASSOCIATED FLUSHOMETER VALVES SHALL USENO
     MORE THAN 1.28 GALLONS PER FLUSH AND SHALL MEETPERFORMANCE STANDARDS
     ESTABLISHED BY THE AMERICANNATIONAL STANDARDS INSTITUTE STANDARD
     A112.19.2RESIDENTIAL ENERGY REQUIREMENTS: RESIDENTIAL ENERGY REQUIREMENTS:
     1- 30" X 48" MINIMUM CLEAR FLOOR SPACE ADJACENT TO RANGE TOALLOW PARALLEL
     APPROACH.2- 30" MIN. SPACE FOR SINK INSTALLATION WITH REMOVABLE BASECABINET
     PER SEC 1133A.3; 30" X 48" MIN. CLEAR FLOOR SPACE TOALLOW EITHER FORWARD OR
     PARALLEL APPROACH. KNEE & TOECLEARANCE PER FIG. 11A-9D ON DA1.9.3- 30"
     MINIMUM COUNTERTOP SPACE FOR WORK SURFACE WITHREMOVABLE BASE CABINET AND
     FINISH FLOORING BENEATH THESINK; 30" X 48" MINIMUM CLEAR FLOOR SPACE TO
     ALLOW EITHERFORWARD R PARALLEL APPROACH.4- BASE CABINET FOR STORAGE MAX.
     DEPTH 24".5- NO BASE CABINET & SINK TOP OF FIXTURE RIM REQUIRED TO BE34"
     MAX. HEIGHT. WATER SUPPLY AND DRAIN PIPES SHALL BEINSULATED OR OTHERWISE
     COVERED TO PROTECT AGAINSTCONTACT. THERE SHALL BE NO SHARP OR ABRASIVE
     SURFACESUNDER LAVATORIES PER FIG. 11A-9D ON DA1.9.6- GRAB BAR REINFORCEMENT
     PER SHEET DA1.10 FIG. 11A-9G(a).TOILET SIDE GRAB BAR TO BE WALL HUNG.7-
     ARTIFICIAL LIGHTING TO BE INSTALLED TO ACHIEVE AN AVERAGEILLUMINATION OF 10
     FOOT CANDLES OVER THE AREA OF THE ROOMAT 30 INCHES ABOVE FLOOR LEVEL.8-
     MECHANICAL VENTILATION TO BE PROVIDED PER CALIFORNIAMECHANICAL CODE.9- GRAB
     BAR REINFORCEMENT PER SHEET DA1.10 FIG. 11A-9G(b)(c).SUPPLEMENTAL
     NOTES:INTERIORDOORS SHALLHAVE A 18"STRIKE EDGECLEARANCE ATPULL SIDEELEVATOR
     CONTROL ELEVATIONSDOOR NO.SIZEFRAMEMATERIALDOORTYPED1PROPOSED DOOR
     SCHEDULEREMARKSSINGLE 36" X 96" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY
     DOOR TO UNITSD2SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     SWINGBEDROOMSD4SINGLE 36" X 80" X 1 3/4"SOLID COREWOOD SWINGSTAIR CASE 2HR
     FIRE RATEDSINGLE 36" X 96" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR
     TO BUILDING FIRE RATING(MIN.)60602060D5D6DOUBLE 48" X 96" X 1 3/4" SOLID
     CORE STEEL SWING ENTRY TO TRASH ROOMD7SINGLE 36" X 80" X 1 3/4" SOLID CORE
     WOOD SWING MAIN ENTRY DOOR TO UNITSD9SINGLE 36" X 80" X 1 3/4"HOLLOW
     COREWOOD SWINGBEDROOMSSINGLE 36" X 80" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS606060D10 SINGLE 36" X 80" X 1 3/4"SOLID CORESTEEL
     SLIDEELEVATORD3 SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS60D8RISE = 7" MAXRUN = 11" MIN34"-38" HANDRAIL34"-38"
     HANDRAILUPRISE = 7" MAXRUN = 11" MIN34"-38" HANDRAIL34"-38"
     HANDRAIL36"x48"RESCUE AREADND3PHD3PHNOTE:ALL RATED DOORS MUST BE EITHER
     SELF-CLOSING OR AUTOMATIC - CLOSING .WDW. NO.SIZEPROPOSED WINDOW
     SCHEDULETYPEREMARKSW2W15' W X 4' HDUAL GLAZED SLIDER3' W X 18" HDUAL GLAZED
     SLIDERTEMPERED GLASSFIRE RATING (MIN.)454560 - FIRE RESISTANT GLAZINGTESTED
     TO ASTM E119 OR UL263 .W33' W X 7' HDUAL GLAZED SLIDERTEMPERED GLASSW44' W
     X 4' HDUAL GLAZED SLIDER45W5.5' W X 14' HDUAL GLAZED FIXEDTEMPERED
     GLASSW61.5' W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW75.5' W X 14' HDUAL
     GLAZED FIXEDTEMPERED GLASSW89' W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW95'
     W X 8' HDUAL GLAZED FIXEDTEMPERED GLASSELEVATORPROVIDE ADDITIONAL SMOKE
     ANDDRAFT CONTROL HOISTWAY DOOR, UL1784 TESTED60 MIN RATED OPENINGELEVATOR
     CAR SHALLHAVE MIN DIMENSION OF80"x54" AND A 42" CLEAROPENING90 MIN FIRE
     RATED DOORELEVATORSHALL BE UNDERSEPARATEPERMITMECHANICALROOM SHALL
     BELOCATED ONTHE ROOFA-1.82
     
 12. 
     REVISIONSBYELEVATOR SPECSSHAWN CONSULTING 23 UNIT APARTMENTS LOS ANGELES,
     CA 900111528 EAST VERNON ST ADDRESS:OWNER:NOTE TO CONTRACTOR:CONTRACTOR TO
     VERIFY ALL CONDITIONS IN THE FIELD.THESE PLANS SERVE AS GUIDELINE
     FORCONSTRUCTION AND FIELD CONDITIONS MAY VARY ANDTAKE PRECEDENCE. WE ARE
     NOT HELD RESPONSIBLEUNDER ANY CONDITION FOR CONTRACTOR'SPERFORMANCE IN THE
     CONSTRUCTION AND ORMANAGEMENT OF THIS PROJECT AND FOR ANYDISCREPANCIES THAT
     MAY ARISE FROM THESE PLANS.HALL FIXTURE DETAIL1CHECK LOCAL BUILDING CODES
     FOR HALLWAYCLEARANCES WHEN CONTROL DOORS ARE OPENEDFOR SERVICE OF THE
     ELEVATOR.NOTE ETHE FRONT SURFACE OF THE MAINLINE DISCONNECT MUSTPROJECT
     INTO CLEAR OPENING OF CONTROL SPACE.IF THE SIZE OF THE CONTROL SPACE IS
     INCREASED,A MEANS OF LOCATING THE MAINLINE DISCONNECT INTO THENOTE FCLEAR
     OPENING MUST BE PROVIDED.SPACE REQUIREMENTSZZMINIMUM CONTROLONE CARMIN.
     CLR.(SEE NOTE E)ZZ(MIN. ROOM WIDTH)DOORMIN. CLR.MINIMUM CLEAR HEIGHTSECTION
     Z - Z5'-9"4'-0"4'-0"5'-9"3'-7 5/16"(MIN. ROOM WIDTH)3'-0"DOOR5'-9"ROOM
     REQUIREMENTSMINIMUM CONTROLONE CAR6'-6"8"7'-6"8"5'-9"3'-10"FRONT HOISTWAY
     LINE1'-4"(MIN. ROOM WIDTH)(MIN. ROOM DEPTH)(MIN. ROOM DEPTH)3'-7 5/16"MIN.
     CLEARSPACE REQUIREMENTSZZMINIMUM CONTROLONE CARMIN. CLR.(SEE NOTE E)(MIN.
     ROOM WIDTH)DOOR3'-7 5/16"4'-0"5'-9"MAIN LINES & LIGHT SW.(SEE NOTE F)(NOT
     BY OTIS)2'-7"(MIN. ROOM DEPTH)WITH AUTOMATICRECOVERY OPERATIONWITHOUT
     AUTOMATICRECOVERY OPERATIONBLOCKOUTS IN WALL TOALLOW ELECTRICAL TROUGHING &
     CONDUIT, SIZE SHOWN IS FOR 1 CAR ARRANGEMENT W/ CONTROL SPACE/ROOM AT THE
     TOP LANDING.(SEE NOTE 3, (REF:-PWBO))NOTES:WEIGHT OF CONTROLLER = 350
     lbs.EMBED LOCATION DETAILCOUNTERWEIGHT BRACKET SUPPORTSFRONT HOISTWAY
     WALLREAR HOISTWAY WALL(NOT TO SCALE)C EMBED PLATELC EMBED PLATELEMBED
     PLATE(NOT BY OTIS)CWT RAILCAR RAILCL CWT RAILC CAR
     RAILL(TYP)(TYP)CARCWTCL4'-3 13/16"2'-1 7/8"3'-8 13/16"3 1/2"1'-10 3/8"3
     1/2"2'-1 7/8"1'-10 3/8"5.93"6 9/16"6'-11" HOISTWAY DEPTH3'-8 1/8"3'-2
     7/8"ELEV. No. 1A-1.9
     
 13. 
     2'-6"1'-11"3'-8"3'-8"3'-8"3'-8"5'-0"1'-6"9'-6"3'-0"3'-6"16'-0"5'-0"16'-0"37'-0"9'-0"5'-0"5'-6"1'-6"1'-11"3'-8"3'-8"3'-8"3'-8"5'-0"1'-6"3'-6"1'-6"13'-0"3'-8"3'-8"2'-0"3'-0"10'-4"4'-0"3'-0"1'-10"9'-6"1'-6"3'-6"13'-0"3'-8"3'-8"2'-0"3'-0"10'-4"4'-0"3'-0"1'-10"9'-6"1'-6"3'-6"13'-0"3'-8"3'-8"2'-0"3'-0"10'-4"4'-0"3'-0"1'-10"9'-6"16'-6"17'-6"16'-0"5'-0"16'-0"37'-0"3'-0"2'-9"5'-0"5'-3"4'-0"1'-6"3'-0"3'-6"3'-0"1'-6"4'-0"5'-3"5'-0"5'-0"5'-0"5'-3"4'-0"1'-6"3'-0"3'-0"1'-6"4'-0"5'-3"23'-1"23'-7"23'-1"6'-8"121'-0"5'-0"4'-1"4'-0"7'-3"23'-1"10'-6"14'-5"3'-0"3'-3"5'-0"6'-3"4'-0"5'-8"3'-0"3'-6"3'-0"5'-8"4'-0"6'-3"5'-0"4'-6"3'-0"5'-8"4'-0"6'-3"17'-8"28'-5"28'-5"18'-2"121'-0"5'-0"3'-3"3'-0"14'-5"28'-5"5'-0"3'-6"1'-6"9'-6"13'-0"3'-0"1'-10"2'-6"2'-6"2'-6"5'-1"2'-6"1'-9"4'-0"3'-0"1'-10"1'-6"3'-6"9'-6"13'-0"2'-6"2'-6"2'-6"5'-1"2'-6"1'-9"4'-0"3'-6"1'-6"9'-6"13'-0"3'-0"1'-10"2'-6"2'-6"2'-6"5'-1"2'-6"1'-9"4'-0"3'-0"1'-10"1'-6"3'-6"9'-6"13'-0"2'-6"2'-6"2'-6"5'-1"2'-6"1'-9"4'-0"3'-6"7'-0"9'-0"2'-0"3'-0"5'-0"2'-1"2'-6"2'-1"1'-4"4'-0"3'-6"8'-9"6'-8"5'-9"4'-0"11'-7"11'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"ø5'-0"DRAWING
     LEGEND- INTERIOR PARTITION WALL- 2 HR FIRE RATED SHAFT- 1 HR FIRE - STC 56
     RATED WALLSEE WALL ASSEMBLY DETAIL ON PAGE A1.5A-2.0REVISIONSBYFIRST FLOOR
     LAYOUT SHAWN CONSULTING 23 UNIT APARTMENTS LOS ANGELES, CA 900111528 EAST
     VERNON ST ADDRESS:OWNER:DRAWING LEGENDCMMVCARBON MONOXIDE DETECTORSMOKE
     DETECTORSDENERGY STAR EXHAUST FAN. COMPLIANT AND BEDUCTED TO TERMINATE TO
     THE OUTSIDE OF THEBUILDING. FAN, NOT FUNCTIONING AS A COMPONENTOF A WHOLE
     HOUSE VENTILATION SYSTEM, MUST BECONTROLLED BY A HUMIDITY CONTROL 50 CFM
     MINNOTE TO CONTRACTOR:CONTRACTOR TO VERIFY ALL CONDITIONS IN THE
     FIELD.THESE PLANS SERVE AS GUIDELINE FORCONSTRUCTION AND FIELD CONDITIONS
     MAY VARY ANDTAKE PRECEDENCE. WE ARE NOT HELD RESPONSIBLEUNDER ANY CONDITION
     FOR CONTRACTOR'SPERFORMANCE IN THE CONSTRUCTION AND ORMANAGEMENT OF THIS
     PROJECT AND FOR ANYDISCREPANCIES THAT MAY ARISE FROM THESE PLANS.1. ALL NEW
     GLAZING WILL BE INSTALLED WITH CERTIFYINGLABEL ATTACHED, SHOWING
     U-VALUE.2.PIPING FOR RECIRCULATING WATER HEATING SYSTEM ISREQUIRED TO
     INSULATE FOR THE ENTIRE LENGTH REGARDLESSOF LOCATION PER SECTION 150
     (j)2.3. LIGHTING IN KITCHENS SHALL HAVE LAMPS PROVIDING A MIN.OF 40 WATT
     (NO COMPACT FLUORESCENT). A FIXTURE WHICH ISTHE ONLY LIGHTING IN THE
     KITCHEN WILL BE CONSIDEREDGENERAL LIGHTING. GENERAL LIGHTING SHALL BE
     CONTROLLEDBY THE MOST ACCESSABLE SWITCH.4. FLUORESCENT FIXTURES SHALL NOT
     CONTAIN MEDIUM BASEINCANDESCENT LAMP SOCKET AND SHALL BE ON
     SEPARATESWITCHES FROM ANY INCANDESCENT LIGHTING.GENERAL REQUIREMENTS &
     NOTES:1. TOILET ROOM FLOORS SHALL HAVE A SMOOTH, HARD NON-ABSORBENT SURFACE
     SUCH AS PORTLAND CEMENT, CERAMICTILE OR OTHER APPROVED MATERIAL THAT
     EXTENDS UPWARDONTO THE WALLS AT LEAST 5 INCHES.2. ATTIC (WITH OVER 30"
     HEADROOM) MUST HAVE ACCESSOPENING (22"x30" MIN.).3. AN APPROVED SEISMIC GAS
     SHUTOFF VALVE WILL BEINSTALLED ON THE FUEL GAS LINE ON THE DOWN STREAM
     SIDEOF THE UTILITY METER AND BE RIGIDLY CONNECTED TO THEEXTERIOR OF THE
     BUILDING OR STRUCTURE CONTAINING THEFUEL GAS PIPING.4. GLAZING IN HAZARDOUS
     LOCATIONS SHALL BE TEMPERED.5.PROVIDE ULTRA FLUSH WATER CLOSETS FOR ALL
     NEWCONSTRUCTION.6. PROVIDE 70 INCH HIGH NON-ABSORBENT WALL ADJACENTTO
     SHOWER AND APPROVED SHATTER-RESISTANT MATERIALSFOR SHOWER ENCLOSURE.7.
     WATER HEATER MUST BE STRAPPED TO WALL.5.ALL INCANDESCENT LIGHTING FIXTURES
     RECESSED INTOINSULATED CEILINGS SHALL BE APPROVED FOR ZERO
     CLEARANCEINSULATION COVER (TYPE IC) BY UL OR OTHER APPROVED LABS6. ALL
     SHADING DEVICES MUST BE INSTALLED PRIOR TOFINAL INSPECTION.7. IN SHOWERS
     AND TUB-SHOWER COMBINATIONS, CONTROL VALVESMUST BE PRESSURE BALANCED OR
     THERMOSTATIC MIXING VALVES8. WATER CLOSETS AND ASSOCIATED FLUSHOMETER
     VALVES SHALL USENO MORE THAN 1.28 GALLONS PER FLUSH AND SHALL
     MEETPERFORMANCE STANDARDS ESTABLISHED BY THE AMERICANNATIONAL STANDARDS
     INSTITUTE STANDARD A112.19.2RESIDENTIAL ENERGY REQUIREMENTS: RESIDENTIAL
     ENERGY REQUIREMENTS: BICYCLE PARKING CALCULATION# DWELLING UNITS = 23SHORT
     TERM SPACES REQUIRED = 3 (1 x 10 UNITS)SHORT TERM SPACES PROVIDED = 3SHORT
     TERM BIKE PARKING SHALL BE LOCATEDON SITE PLAN (SEE A-1.0)LONG TERM SPACES
     REQUIRED = 23 (1 x UNIT)LONG TERM SPACES PROVIDED = 23LONG TERM BIKE
     PARKING SHALL BE LOCATED INBIKE ROOM (SEE A-1.3)NOTE:ALL RATED DOORS MUST
     BE EITHER SELF-CLOSING OR AUTOMATIC - CLOSING .WDW. NO.SIZEPROPOSED WINDOW
     SCHEDULETYPEREMARKSW2W15' W X 4' HDUAL GLAZED SLIDER3' W X 18" HDUAL GLAZED
     SLIDERTEMPERED GLASSFIRE RATING (MIN.)454560 - FIRE RESISTANT GLAZINGTESTED
     TO ASTM E119 OR UL263 .W33' W X 7' HDUAL GLAZED SLIDERTEMPERED GLASSW44' W
     X 4' HDUAL GLAZED SLIDER45W5.5' W X 14' HDUAL GLAZED FIXEDTEMPERED
     GLASSVENTILATION CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR AREA x 4%=
     ALLOWABLE VENTILATION128 x 0.04 = 5.1 Sq.Ft.REQUIRED= 5.1 Sq.Ft.PROVIDED=
     20 Sq.Ft.LIGHT CALCULATIONSFLOOR AREA: 128 Sq.Ft.FLOOR AREA x 8%= ALLOWABLE
     LIGHT128 x 0.08 = 10.2 Sq.Ft.REQUIRED= 10.2 Sq.Ft.PROVIDED= 20 Sq.Ft.W61.5'
     W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSW75.5' W X 14' HDUAL GLAZED
     FIXEDTEMPERED GLASSW89' W X 14' HDUAL GLAZED FIXEDTEMPERED GLASSRISE = 7"
     MAXRUN = 11" MIN34"-38" HANDRAIL34"-38" HANDRAILUPRISE = 7" MAXRUN = 11"
     MIN34"-38" HANDRAIL34"-38" HANDRAILDNTRASHROOM40
     S.F.SDD5PHD4D3PHD3PHW6W5W7W8RISE = 7" MAXRUN = 11" MIN34"-38"
     HANDRAIL34"-38" HANDRAILUPRISE = 7" MAXRUN = 11" MIN34"-38" HANDRAIL34"-38"
     HANDRAILDND4PHD3PHD3DOOR NO.SIZEFRAMEMATERIALDOORTYPED1PROPOSED DOOR
     SCHEDULEREMARKSSINGLE 36" X 96" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY
     DOOR TO UNITSD2SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     SWINGBEDROOMSD4SINGLE 36" X 80" X 1 3/4"SOLID COREWOOD SWINGSTAIR CASE 2HR
     FIRE RATEDSINGLE 36" X 96" X 1 3/4" SOLID CORE WOOD SWING MAIN ENTRY DOOR
     TO BUILDING FIRE RATING(MIN.)60602060D5D6DOUBLE 48" X 96" X 1 3/4" SOLID
     CORE STEEL SWING ENTRY TO TRASH ROOMD7SINGLE 36" X 80" X 1 3/4" SOLID CORE
     WOOD SWING MAIN ENTRY DOOR TO UNITSD9SINGLE 36" X 80" X 1 3/4"HOLLOW
     COREWOOD SWINGBEDROOMSSINGLE 36" X 80" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS606060D3 SINGLE 36" X 96" X 1 3/4"HOLLOW COREWOOD
     POCKETBATHROOMS60D8D10 SINGLE 36" X 80" X 1 3/4"SOLID CORESTEEL
     SLIDEELEVATORD2BEDROOMSDWHW4 UNIT105418
     S.F.CMSDFRIDGED1W1GBGBGBGBGBD3W2D2BEDROOMSDWHW4UNIT103418
     S.F.SDCMFRIDGED1W1GBGBGBGBGBD3W2D2BEDROOMSDWHW4UNIT101418
     S.F.SDCMFRIDGED1W1GBGBGBGBGBD3W2HALLWAY600 S.F.W95' W X 8' HDUAL GLAZED
     FIXEDTEMPERED GLASSMVMVMVD2BEDROOMSDW1SDCM UNIT107338
     S.F.MVGBGBGBD3W2WHFRIDGED1W4GBGBD2BEDROOMSDW1CMSD UNIT106338
     S.F.MVGBGBGBD3W2WHFRIDGED1W4GBGBD2BEDROOMSDW1SDCM UNIT104338
     S.F.MVGBGBGBD3W2WHFRIDGED1W4GBGBD2BEDROOMSDW1CMSD UNIT102338
     S.F.MVGBGBGBD3W2WHFRIDGED1W4GBGBTWO-WAY RADIOCOM. STATIONKNOX
     BOXELEVATORPROVIDE ADDITIONAL SMOKE ANDDRAFT CONTROL HOISTWAY DOOR, UL1784
     TESTED60 MIN RATED OPENINGELEVATOR CAR SHALLHAVE MIN DIMENSION OF80"x54"
     AND A 42" CLEAROPENING90 MIN FIRE RATED DOORELEVATORSHALL BE
     UNDERSEPARATEPERMITD1MECHANICALROOM SHALL BELOCATED ONTHE
     ROOF110234567891011121314151618 19 20 21 22 2317TRASHROOM60
     S.F.SDAA-1.3AA-1.3BA-1.3BA-1.3AA-8.0AA-8.011S-712S-711S-712S-74545454545W4BA-8.0BA-8.0PH
     

1528 Vernon ave 10-25-22.pdf
57 %
01 von 44






Für später in Dropbox speichern
Registrieren Sie sich oder melden Sie sich bei Ihrem Konto an
Vorname
Nachname
E-Mail-Adresse
Passwort
Durch die Auswahl „Zustimmen und Registrieren“ stimme ich den Allgemeinen
Geschäftsbedingungen von Dropbox zu. In unserer Datenschutzrichtlinie können Sie
nachlesen, wie wir Ihre Daten nutzen und schützen.
Zustimmen und RegistrierenMit Google registrieren


word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word

mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1