iccpsam.com Open in urlscan Pro
23.88.36.230  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Skip to content


VISIT CORROSION.NL


VISIT BLUESTREAMOFFSHORE.COM


VISIT BLUESTREAMOFFSHORE.COM




VISIT CORROSION.NL




ICCP-SAM


ICCP-SAM

THE ICCP-SAM TOOL REPRESENTS A GROUNDBREAKING ADVANCEMENT IN THE FIELD OF
OFFSHORE WIND TURBINE MAINTENANCE AND PROTECTION. SPECIFICALLY DEVELOPED TO MEET
THE DEMANDS OF THE NEW GENERATION OF TURBINES, WHICH ARE LARGER IN SIZE, LOCATED
IN DEEPER WATERS, AND OFTEN SITUATED IN REGIONS WITH LOW SALINITY, THE ICCP-SAM
TOOL IS SET TO REVOLUTIONIZE THE INDUSTRY.







ENVIRONMENT

 * Reduction of secondary steel
 * No pollution of aluminum waste
 * Liftime externion possible
 * No coating needed
   
   
   




INSTALLATION

 * No installation vessel needed
 * Transfer from people and tool
 * OSV or CTV options
   
   
   




DESIGN

 * Design Freedom
 * No secondary steel needed like Boatlanding or Skirt extension





COSTS

 * Cost reduction in installation
 * Cost reduction in steel
 * Less yard space needed
 * One contractor / single point of contact
 * Reduction of interfaces





DURABLE

 * Outlive foundation.
 * DNV approved.
 * Durability test of connections
 * Cable protection from the inside
   
   





SAFETY

 * No diver intervention
 * No cables on the outside
   
   
   


ICCP AND SAM

The ICCP-SAM, an advanced technological solution meticulously engineered for the
next generation of offshore wind turbines characterized by larger dimensions,
deeper marine deployments, and operations in low-salinity areas, represents a
significant collaboration between Bluestream, an OEG renewable company and
CORROSION who have pooled extensive expertise and comprehensive field data to
develop this DNV-approved, specialist-recognized tool that offers superior
protection and maintenance capabilities, with the first installations of
innovative ICCP anodes using the ICCP-SAM tool set to enhance the performance
and reduce maintenance requirements of wind farms starting in 2025, thus setting
a new benchmark in the offshore wind industry by ensuring robust protection and
optimal efficiency for modern turbines.

Niels Ros

Manager Offshore wind
CORROSION

info@corrosion.nl



Rutger Lieverse

Commercial Manager
Bluestream

info@bluestreamoffshore.com




ICCP-SAM SPECIFICATIONS


ICCP-SAM SPECIFICATIONS

MECHANICAL SPECIFICATIONS

 * Space required to manipulate/rotate total assembly of 3000 mm
 * Lifting arrangement above manholes/inside TP to mobilize and launch equipment
   (min 500kg)
 * Flat-floor to drive material inside TP without having to lift. David arm
   where required to lift over
   edges/thresholds
 * Possibility to place 10ft container on TP access deck, deck-load requirement
   10T
 * Cable hang-off point of ICCP anode inside ATP located close to wall and
   directly above aperture
   for minimum cable suspension
 * ICCP hole dimensions: 300×500 elliptical
 * ICCP hole location in vertical section of foundation
 * ICCP holes not in-line/same orientation with the Cable Entry Holes, to
   prevent entanglement of
   ICCP cable and power cable. This also helps installation purposes if power
   cables are already
   installed
 * ICCP holes in-line with current direction to make installation easier and
   prevent sideway forces
   on anode after installation. This condition is only valid IF the above
   conditions can be met as
   well.

MANHOLE SPECIFICATIONS

 * Manhole: 850×850 minimum (internal diameters)
 * Each ICCP anode location requires a manhole directly above to make
   installation and control
   easier and avoid cable clashes with power cables
 * The centre of the manhole needs to be >=2000 mm away from the monopile wall
   to provide
   enough clearance between the ICCP anode tip and the monopile wall during
   installation.
 * Lifting arrangement above manhole/inside TP to mobilize and launch equipment
   ( min 500kg)
   
   

PAINT SPECIFICATIONS

 * Contrasting area around ICCP hole inside MP for clear edge identification
 * Contrasting line down from topside of foundation to ICCP hole for location
   purposes of correct
   hole. Topside marking of ICCP heading/numbering