arcademu.blogspot.com Open in urlscan Pro
2a00:1450:4001:830::2001  Public Scan

Form analysis
0 forms found in the DOM

Text Content

PAGES

 * Home
 * News
 * Games and Systems
 * Projects
 * About Us






PC 220V POWER SUPPLY TO SEGA NAOMI CONVERSION


I was wondering if it is possible to convert a 220v computer power supply to
connect to a Naomi board instead of the original 110v with a converter from 220v
to 110v. After some research on the internet i found guides and articles, so i
tried to make one of my own. Using only screw terminal strips and insulating
tape i connected Naomi's power cables to PC power supply cables without
soldering or buying specific molex and adapters. If you have some spare Naomi
extension power cable or from remove a burned Naomi power supply for example,
along with a spare PC power supply i believe its really easy to make.








For the conversion of the PC power supply to be able to connect to a Naomi
system i used:

- A 300w -220v PC power supply


    








- Naomi's JST power cables removed from a burned 110v power supply



- Screw terminal strips with around 16 available ways in total


   







- Insulating tape



Pictures finished





First i removed the cables from the burned Naomi power supply by simply cutting
them and striped them. Afterwards i checked the diagram below, that i found on
the internet, i checked the PC power supply and found the corresponding cables
according to the voltages.




Image found at www.sega-naomi.com forum

The Naomi needs the following voltages:
2 x +3.3v, 2 x +5v, 1 x+12v and 7 x ground - common

Most of this wires you can find it on the 20pin that connects to the motherboard
from the PC power supply.

Finally i cut and striped the corresponding wire and connected them together
with the screw terminal strips. In the end the only thing that i needed to do is
to short the power switch with a ground wire on the PC power supply in order to
automatically turn on when you plug it in. In my case the power switch was the
gray colored as you can see in the picture above.

I tested it with Naomi and Naomi 2 board and worked great without having to use
110v to 220v converter and the original Naomi power supply. If you do not want
to solder or buy specific adapters i believe that this is an easy and cheap way
to convert the power supply as long as you have those spare parts lying around.

By Tokugr






Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest



1 COMMENT:

 1. AnonymousMarch 15, 2019 at 9:09 AM
    
    Very good points you wrote here..Great stuff...I think you've made some
    truly interesting points.Keep up the good work. yk6kw
    
    
    ReplyDelete
    Replies
    Reply
    
    

Add comment

Load more...








Newer Post Older Post Home

Subscribe to: Post Comments (Atom)



POPULAR POSTS

 * PC 220V POWER SUPPLY TO SEGA NAOMI CONVERSION
   I was wondering if it is possible to convert a 220v computer power supply to
   connect to a Naomi board instead of the original 110v with a co...
   







Arcademu Blog. Powered by Blogger.



Diese Website verwendet Cookies von Google, um Dienste anzubieten und Zugriffe
zu analysieren. Deine IP-Adresse und dein User-Agent werden zusammen mit
Messwerten zur Leistung und Sicherheit für Google freigegeben. So können
Nutzungsstatistiken generiert, Missbrauchsfälle erkannt und behoben und die
Qualität des Dienstes gewährleistet werden.Weitere InformationenOk