www.howtomt2.net Open in urlscan Pro
111.90.156.208  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Skip to content
How To MT2
 * Home
 * Sample Page

How To MT2
Main Menu
 * Home
 * Sample Page


HOW TO MIX AND USE MELANOTAN 2

Even the most quality product can appear ineffective if not used properly.
That’s why it’s crucial to carefully read information, we have developed a
thorough guide on how to use Melanotan 2 to help you get the most out of it and
avoid unwanted side-effects. Please, read it carefully and any questions please
feel free to contact us. As per our terms and conditions this is for information
purposes only.


HOW TO MIX MT2 VIALS.

The product comes in two separate flasks. Their contents should be combined to
get one solution. Mixing Melanotan 2 does not take much trouble. However, there
are certain rules to follow to ensure the substance works appropriately. Please,
take these steps to reap maximum rewards from your treatment:

 1. pull off the yellow cap from Melanotan 2 injection vial  see PICS 2 below
 2. clean the surfaces of the vials with an alcohol wipe which are included with
    the kits.
 3. clean the surfaces of the water with the alcohol wipe
 4. take the syringe out of the packaging and push the needle part into the side
    of the water and fill the syringe with water 1 full syringe is 1ml of water
    (some people add another quarter of  water to the solution as this may
    reduce the initial side effects)*. SEE PICS  1 Below
 5. slowly inject water into the vial with MT2, pushing the needle through the
    centre of the grey cap which was below the yellow cap (there is a circle
    raised top of the grey cap use this as a guide for the centre, if you feel
    resistance you may need to place the needle slightly off centre)   see PICS
    2 below
 6. Once the needle is in the vial try to aim so  the water goes on  the side of
    the vial and not directly onto the MT2.  If you are adding another quarter
    of a syringe 0.25ml repeat the step above. FOR MIXING NASAL REPEAT THIS
    STEP  USING 2 FULL SYRINGES OF WATER PER VIAL.
 7. carefully roll the Melanotan 2 vials between your fingers to help the
    Melanotan 2 to dissolve into a solution ( NEVER SHAKE THE VIAL)
 8. once the mixture is ready, put it into the fridge standing upright until you
    are ready to use it

Please note: Water once open cannot be kept, any remaining water should be
discarded (put in the bin).


FOR MIXING NASAL SPRAY, USE THE STEPS ABOVE PUTTING 2 FULL SYRINGES OF WATER PER
VIAL, DRAW THE SOLUTION OUT OF BOTH VIALS AND PLACE INTO THE NASAL SPRAY BOTTLE
(GENTLY).

The mixed Melanotan solution can be stored in a fridge for up to six months
(keep vials upright). The shelf life of the unmixed product is about 12 months
in  cool dark place.

*People with a low tolerance level to reduce tanning injection side effects may
wish to either micro dose 0.05ml  (20th of a syringe) for the first 3-4 days or
add double the amount of water when mixing the solution.

What type of syringe, should you use? if you buy a kit the correct syringes will
be enclosed, however if you decide to buy syringes from another store you need
an ultra fine 1ml fixed needle syringe which needs to be either 29g or 30g (g
measure the thickness of the needle part).  See the pics below for the amount of
water per vial depending on the type of syringe you are using.

ML type Syringe water amounts for mixing :

PICS 1

Insert the needle into the side of the water



ml type Syringe water amounts for mixing



IU type Syringe water amounts for mixing:



FOR NASAL SPRAY MIX 2 FULL SYRINGES OF WATER PER VIAL

PICS 2




HOW TO USE MELANOTAN 2 TANNING INJECTIONS

If you’re ready to give yourself a tanning shot, make sure you have the mixed
MT2 solution, and your syringe and alcohol swabs are at hand. The injection
process can also be completed in six steps:

 1. Take the mixed MT2 vial. Push the needle part of the syringe through the
    grey cap centre (like you did when filling the vial with water).
 2. Pull back on the plunger to fill the syringe with 0.1ml ( of the mixed
    solution and withdraw the needle the first main marker which is around 10th
    of a syringe)* SEE PIC BELOW
 3. Locate the shot site in your belly area (a few centimetres away from the
    navel) and clean it with a swab (see pic*).
 4. Pinch / nip 1-2 cm of skin you tummy fat tissue about  four fingers distance
    from your belly button, this will help you not to go too deep.
 5. Insert the needle into the area you hold at a 90-degree angle (see pic **).
    Do not withdraw it until you administer the entire 0.1ml of the solution in
    the syringe. IMPORTANT: If you are slim and have little fatty tissue you may
    need to  insert the needle at a 45 degree angle. You should not go through
    the fatty layer (subcutaneous layer) of you skin.

Copyright © 2024 How To MT2 | Powered by Astra WordPress Theme

Scroll to Top