kits4hams.com Open in urlscan Pro
2607:f1c0:100f:f000::22b  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Kits 4 Hams
kits4hams@gmail.com

  Menu
Skip to content
 * Products Overview
 * SHARI PiXX
 * SHARI PiHat (52Pi case) using a Pi4
 * SHARI PiHat (52Pi case) using a Pi5
 * SHARI PiHat (Neo Case)
 * SHARI PiHat (Unistorm Case)
 * SHARI PiHat Mod2 Board Only
 * SHARI PiZero
 * DINAH – USB A
 * DINAH USB-C
 * BRIAN
 * PAUL
 * AURSINC SR110 Allstar Node Evaluation




PRODUCTS OVERVIEW

SHARI Pi3U

SHARI (SA818 Ham Allstar Radio Interface) is a ham construction project that
implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF
(420 – 450 MHz) or VHF (144-148 MHz) radio module.  SHARI plugs into two USB
jacks on a Raspberry Pi2, 3 or 4. There are 4 versions of SHARI:


 * SHARI Pi3U (UHF for the Pi3)
 * SHARI Pi3V (VHF for the Pi3
 * SHARI Pi4U (UHF for the Pi4)
 * SHARI Pi4V (VHF for the Pi4)

SHARI PiHat

SHARI PiHat is a ham construction project that implements a Raspberry Pi hosted
Allstar node using a NiceRF SA818 embedded UHF (420 – 450 MHz) or VHF (144-148
MHz) radio module. The PC board use a slightly modified PiHat form factor which
plugs into the GPIO connector on a Raspberry Pi4 so the Allstar node is
contained in a single enclosure. Options include:

 * VHF (2 meters) or UHF (70 cm)
 * External fan

SHARI  PiHat (52PI Case) is a ham construction project that implements a Pi4B
hosted Allstar node using a NiceRF SA818 embedded UHF (420 – 450 MHz) or a VHF
(144-148 MHz) radio module.  The radio module and interface circuits are located
on a custom Raspberry Pi Hat board.   This Pi Hat board plugs into the Pi4B
using the 40 pin GPIO connector. A JST 2 conducter cable is used to complete a
USB connection to the PI4B. This case includes an internal fan. The RF signal is
routed to the antenna using a coax cable assembly to allow alternate antenna
locations to be used. A complete Allstar node can be created with a SHARI PiHat
52PI Case kit, a Raspberry Pi4B (with power supply and microSD card) and an
Allstar image.

SHARI PiHat (Unistorm Case)



SHARI PiHat (Unistorm Case) is a ham construction project that implements a
Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420 – 450
MHz) or VHF (144-148 MHz) radio module. This case allows the use of a Raspberry
Pi3 or Pi4 server. The PC board conforms to the PiHat form factor. It plugs into
the GPIO connector on a Raspberry Pi so the Allstar node is contained in a
single enclosure. Options include:

 * VHF (2 meters) or UHF (70 cm)
 * Raspberry Pi3 or Pi4
 * External fan
 * Straight or right-angle antenna

SHARI PiZero

SHARI PiZero is a ham construction project that implements a Raspberry PiZero 2W
hosted Allstar node using a NiceRF SA818 embedded UHF (420 – 450 MHz) or VHF
(144-148 MHz) radio module. The PiZero is a daughter board which plugs into the
SHARI motherboard via the Pi GPIO connector. The SHARI motherboard contains a
USB hub providing three external microB USB ports. An internal plug-in cable
connects the PiZero USB port to the SHARI motherboard.

DINAH

DINAH (DIN connector based Allstar interface for Hams) is a kit construction
project that implements a radio interface to a Raspberry Pi running Allstar
software.  DINAH plugs into a USB jack on a Raspberry Pi. A standard 6 pin
miniDIN cable connects DINAH to any radio with a 6 pin miniDIN packet interface
(also called a data interface).

BRIAN

BRIAN (SM) (Baofeng BF-88S Radio Interface to the Allstar Network) is a kit
construction project that implements a Raspberry Pi hosted Allstar node using
the circuit board and other parts from a Baofeng BF-888S as the node radio
operating in the amateur UHF (70 cm) band. BRIAN connects to a Raspberry Pi
using a short USB cable.

PAUL

PAUL (Packet and Allstar Universal Link) is a kit construction project that
implements a radio interface to a Raspberry Pi running Allstar software.  PAUL
plugs into a USB jack on a Raspberry Pi using a USB A to Mini B cable. A
standard DE9 connector (9 pin dsub) with typical TNC pinout is used for I/O to
the radio. COS and PTT utilize optically coupled solid state relays.

SHARI PiHat Mod2 board only

SHARI PiHat Mod2 board only is the board we use in our SHARI PiHat Unistorm kit.
We sell the board only option for experimentors who would like to build a custom
node using their own case, Pi, power supply and antenna.

The board allows the user to choose between an edge mounted or vertical SMA
connector. It also has a U.FL jack (J3)which can be used with a builder supplied
coax/SMA cable. A fan option is also available

Comments are closed.


Email: kits4hams@gmail.com
Kits 4 Hams | Powered by Mantra & WordPress.