blays.ca Open in urlscan Pro
144.217.32.139  Public Scan

Form analysis
1 forms found in the DOM

POST https://blays.ca/en/grating-lifting-clamp/

<form class="et_pb_contact_form clearfix" method="post" action="https://blays.ca/en/grating-lifting-clamp/">
  <p class="et_pb_contact_field et_pb_contact_field_0 et_pb_contact_field_half" data-id="prenom" data-type="input">
    <label for="et_pb_contact_prenom_0" class="et_pb_contact_form_label">First name</label>
    <input type="text" id="et_pb_contact_prenom_0" class="input" value="" name="et_pb_contact_prenom_0" data-required_mark="required" data-field_type="input" data-original_id="prenom" placeholder="First name">
  </p>
  <p class="et_pb_contact_field et_pb_contact_field_1 et_pb_contact_field_half et_pb_contact_field_last" data-id="name" data-type="input">
    <label for="et_pb_contact_name_0" class="et_pb_contact_form_label">Last name</label>
    <input type="text" id="et_pb_contact_name_0" class="input" value="" name="et_pb_contact_name_0" data-required_mark="required" data-field_type="input" data-original_id="name" placeholder="Last name">
  </p>
  <p class="et_pb_contact_field et_pb_contact_field_2 et_pb_contact_field_half" data-id="email" data-type="email">
    <label for="et_pb_contact_email_0" class="et_pb_contact_form_label">Email</label>
    <input type="text" id="et_pb_contact_email_0" class="input" value="" name="et_pb_contact_email_0" data-required_mark="required" data-field_type="email" data-original_id="email" placeholder="Email">
  </p>
  <p class="et_pb_contact_field et_pb_contact_field_3 et_pb_contact_field_half et_pb_contact_field_last" data-id="phone" data-type="input">
    <label for="et_pb_contact_phone_0" class="et_pb_contact_form_label">Telephone</label>
    <input type="text" id="et_pb_contact_phone_0" class="input" value="" name="et_pb_contact_phone_0" data-required_mark="required" data-field_type="input" data-original_id="phone" placeholder="Telephone">
  </p>
  <p class="et_pb_contact_field et_pb_contact_field_4 et_pb_contact_field_last" data-id="message" data-type="text">
    <label for="et_pb_contact_message_0" class="et_pb_contact_form_label">Message</label>
    <textarea name="et_pb_contact_message_0" id="et_pb_contact_message_0" class="et_pb_contact_message input" data-required_mark="not_required" data-field_type="text" data-original_id="message" placeholder="Message"></textarea>
  </p>
  <input type="hidden" value="et_contact_proccess" name="et_pb_contactform_submit_0">
  <div class="et_contact_bottom_container">
    <div class="et_pb_contact_right">
      <p class="clearfix">
        <span class="et_pb_contact_captcha_question">9 + 2</span> = <input type="text" size="2" class="input et_pb_contact_captcha" data-first_digit="9" data-second_digit="2" value="" name="et_pb_contact_captcha_0" data-required_mark="required"
          autocomplete="off">
      </p>
    </div>
    <button type="submit" name="et_builder_submit_button" class="et_pb_contact_submit et_pb_button">SEND</button>
  </div>
  <input type="hidden" id="_wpnonce-et-pb-contact-form-submitted-0" name="_wpnonce-et-pb-contact-form-submitted-0" value="7565df82b4"><input type="hidden" name="_wp_http_referer" value="/en/grating-lifting-clamp/">
  <input type="hidden" name="q1vmimgs" value="sfw0nqnetw19"><input type="hidden" name="pvapt1my" value="wfs4rbtsksci"><input type="hidden" name="ek2lyl75" value="uicayf4w10ax"><input type="hidden" name="tmg6fmwg" value="vrm5ew92ftey">
</form>

Text Content

Gérer le consentement aux cookies


Pour offrir les meilleures expériences, nous utilisons des technologies telles
que les cookies pour stocker et/ou accéder aux informations des appareils. Le
fait de consentir à ces technologies nous permettra de traiter des données
telles que le comportement de navigation ou les ID uniques sur ce site. Le fait
de ne pas consentir ou de retirer son consentement peut avoir un effet négatif
sur certaines caractéristiques et fonctions.
Fonctionnel Fonctionnel Always active
Le stockage ou l’accès technique est strictement nécessaire dans la finalité
d’intérêt légitime de permettre l’utilisation d’un service spécifique
explicitement demandé par l’abonné ou l’internaute, ou dans le seul but
d’effectuer la transmission d’une communication sur un réseau de communications
électroniques.
Préférences Préférences
Le stockage ou l’accès technique est nécessaire dans la finalité d’intérêt
légitime de stocker des préférences qui ne sont pas demandées par l’abonné ou la
personne utilisant le service.
Statistiques Statistiques
Le stockage ou l’accès technique qui est utilisé exclusivement à des fins
statistiques. Le stockage ou l’accès technique qui est utilisé exclusivement
dans des finalités statistiques anonymes. En l’absence d’une assignation à
comparaître, d’une conformité volontaire de la part de votre fournisseur d’accès
à internet ou d’enregistrements supplémentaires provenant d’une tierce partie,
les informations stockées ou extraites à cette seule fin ne peuvent généralement
pas être utilisées pour vous identifier.
Marketing Marketing
Le stockage ou l’accès technique est nécessaire pour créer des profils
d’internautes afin d’envoyer des publicités, ou pour suivre l’internaute sur un
site web ou sur plusieurs sites web ayant des finalités marketing similaires.
Manage options Manage services Manage {vendor_count} vendors Read more about
these purposes

Accepter Refuser Voir les préférences Enregistrer les préférences Voir les
préférences
Politique de cookies Politique de confidentialité {title}

steevetremblay@blays.ca

© 2019 • ASME BTH-1 STANDARDS • PATENT BY BLAYS

 * Follow
 * Follow

 * Mission
 * Product
 * Security
 * Certifications
 * Distributors
 * Contact
 * FR

 * Mission
 * Product
 * Security
 * Certifications
 * Distributors
 * Contact
 * FR


GRATING LIFTING CLAMP

Blays Grating Lifter is the first lifting clamp specifically designed for
lifting steel grating manufactured to ASME  BTH-1 standards.

 Mission

Provide riggers with a strong and efficient attachment points to the top surface
of the grating to facilitate lifting and, above all, to secure its installation.


BLAYS LIFTING DEVICES

The industry offers a wide range of lifting devices and clamps for safe anchor
points on almost all steel profiles. However, nothing is especially suitable for
steel grating. The steel grating is a relatively light section, approximately
4.1 kg (9 lb) per square foot. However, their large area, 0.9 m (3 ft) By 7.3 m
(24 ft) and the lack of space between the gratings and the structural sections
make their lifting and installation complicated and dangerous. The handling of
steel grating causes many incidents.

PRODUCT



SPECIFICATIONS

 * Each clamp has a lifting capacity of 260 kg (573 lb).
 * A gap of only 50 mm is required under the grating to allow the installation
   of the clamp.
 * Our clamps are made of high-quality steel (G-40-21-300W) and all welds are
   performed by a certified CWB welder (CSA w59-1w47 and w48). Weld joints are
   visually inspected as (CSA w178-2-8) and are 100% magnetic particle tested.
 * The requirements, manufacturing drawings and the calculation book are
   engineered by Dynamic Concept, a firm experienced in developing and
   manufacturing lifting devices that meet or exceed the BTH-1 ASME standards.
 * Safety factor of 5-1.
 * Entirely made in Canada.
 * Each clamp is 220 mm in height for a square base of 130 mm, and its weight is
   4.5 kg.
 * The mechanism is fully enclosed for the safe operation and to remain
   dirt-free.
 * Each clamp comes with certification, a user manual, and an inspection and
   maintenance manual.
 * A 25 mm hook is available for order. The grating clamp comes with a 32 mm
   hook opening to be used with a 32 mm bearing bar grating and can also be used
   to lift 25 mm grating. We strongly recommend installing a 25 mm hook when
   hoisting 25 mm bearing bar grating.
 * Replacement parts must be ordered from BLAYS for safe use, contact us to
   order original parts.

CERTIFICATIONS


THE BLAYS LIFTING CLAMPS ARE CERTIFIED

The Blays lifting clamps are tested individually, the date of the load test is
indicated on the nameplate riveted to the clamp. This plate also indicates the
serial number of the clamp as well as the maximum lifting capacity.

Each clamp is supplied with the following certifications:

 

 * Calculation book
 * Heat number of steel
 * Manufacturing quality control
 * Results of certified visual and magnetic welding tests
 * Certified load test results

SECURITY


SAFE LIFT WARNING

 * Read and understand the operator, maintenance and inspection manuals before
   use.
 * Keep fingers or other body parts away from lifting eyes.
 * Use a proper length steel choker for a lift angle of 60 degrees and more.
 * Don’t load beyond the clamp’s rated capacity.
 * Inspect clamp before each lift.
 * Don’t operate a damaged or malfunctioning clamp.
 * Lift one grating at the time.
 * Use to lift the right steel grating.
 * Don’t lift grating with any equipment attached to.
 * Don’t lift grating with any loose item on it.
 * Don’t lift grating with anyone on it.
 * Don’t lift overhead.
 * Don’t lift load higher than necessary.
 * Never leave suspended load unattended.
 * Don’t weld or modify the clamp in any way.
 * Never remove or damage the WARNING! label.





OPERATING MANUAL

 * Always wear safety glasses, steel-toe boots and leather gloves when using any
   lifting clamp.
 * Read and understand the inspection and maintenance manual.
 * Never exceed the 260 kg (573 lb) capacity per clamp.
 * Inspect clamps before each lift.
 * Find the centre of gravity and locate 4 lifting points on the steel grating.

 

At each lifting point, insert a clamp, the hook slide down between bearing bars,
and the base must be flat on the grating surface.

With the palm of your hand, push the lifting eye down until it is completely
inside the clamp.

While still pushing on the lifting eye, turn the clamp 90 degrees.

Release spring pressure until lifting eye is completely out of clamp.


Attach a self-locking hook on a shackle to the sling.

 

 

 

 

 

INSPECTION ET MAINTENANCE

Pre-use inspection


 * Inspect the body of the clamp for any damage, cracks, or deformation.
 * Make sure both covers are on and properly bolted.
 * Inspect the hook for any damage, cracks, or deformation.
 * While pressing on the lifting eye, make sure that the push and release
   mechanism works properly.

Monthly insepction


 * A monthly inspection logbook must be kept.
 * Perform every step of the pre-use inspection.
 * Remove both covers.
 * Visually inspect the inside mechanism for damage, cracks, or deformation.
 * Visually inspect the spring.
 * Check if the hook screws are still tight, 2 threads of the screw should be
   exposed.
 * Clean dirt and debris out of the mechanism.
 * Reinstall both covers and tighten screws properly.

 



 

 

** Always use blue Locktite 242 and torque screw to 6.6 lb/ft when installing
hook.

DISTRIBUTORS




CANADA (EXEPT QUÉBEC)

ergonindustrial.ca

(855) 278-9383





QUÉBEC / USA

418 891-1685



BECOME A DISTRIBUTOR




AUTHORIZED DISTRIBUTOR

Fill out the order form, and we will send you an official billing statement
including shipping and all other fees, we will wait for you to accept and sign
the billing statement before delivery.

Contact us to order through a local distributor.



NOTICE

It is IMPORTANT to know the diameter of the lifting eye to be used, either:


24 mm • use with shackle


33 mm • use with self-locking hook



BECOME A DISTRIBUTOR OF BLAYS PRODUCTS

Contact us today!





ORDER/REQUEST INFORMATION



First name

Last name

Email

Telephone

Message

9 + 2 =

SEND

Contact




MAIN OFFICE

234 Chemin Maltais-Laberge, Saint-Charles de Bourget QC G0V 1G0


TELEPHONE

418.891.1685


EMAIL

steevetremblay@blays.ca


© 2019 • ALL RIGHTS RESERVED • BLAYS.CA



Gérer le consentement