www.rolatecpump.com Open in urlscan Pro
173.201.185.104  Public Scan

Form analysis
0 forms found in the DOM

Text Content

Purchase your peristaltic pump directly from RolaTec Pump Co. - Drop shipment
services and wholesale prices for Qualified Distributors.


PERISTALTIC PUMPS
MANUFACTURED BY ROLATEC PUMP CO.

RolaTec Pump Co.
855 Village Center Dr., #321
North Oaks, MN 55127-3016
Ph: 651-334-3250

Peristaltic Pump
OEM Tubing Pumps
Peristaltic Tubing
Chemical Dispensing
Purchasing Pumps

Bench Top Peristaltic Pump - 7.0 LPM - 20 PSI
Discontinued - Repair Services Offered
Alternate pump: PM6000 AC Peristaltic Pump

 * Model MP-V450: Bench Top Peristaltic Pump
 * Silicone Tubing: 10 feet long, 3/8" ID x 5/8" OD
   
 * Detachable cord set for 120 VAC connection: 2.5 meters long, C-13 connector
   plugs to the pump
 * Registration Card for the Manufacturer's 2 year Warranty
 * Operator's Manual - Chemical Compatibility Chart
 * Free shipping and handling within the continental United States for ground
   delivery.
 * Standard pump has fixed rollers. It will cost $20 extra for a pump with
   Spring Loaded Rollers.
 * $160 Optional Remote Jack with 5 ft. cord to a Foot Switch for remote On -
   Off operation. Foot Switch easily connects and detaches from pump for normal
   operation.
 * Offer optional rotor configurations based upon desired line pressures and
   applications.
 * The Bench Top peristaltic pump has a universal power supply that accepts
   either 120 VAC or 240 VAC single phase connection.
 * Has a rotor with 4 rollers to progressively squeeze tubing to produce flow.
   Fluid travels through just the interior of the tubing without wetting other
   peristaltic pump components.
 * Some of the uses include dispensing inks, paints, glues, corrosive chemicals,
   sterile fluids, chemical dispensing and abrasive slurry transfer.
 * Variable Flow Control with a 90-450 RPM continuous duty drive. Accurate to
   within 10%
 * 25 feet of lift with 1/4" ID tubing, 15 feet of lift with 3/8" ID tubing.
 * Quick peristaltic tubing replacement. No tools are required. Simply insert
   tubing and close the hood. Spring loaded V-Clamps grip the exterior portion
   of the tubing to secure it during operation
 * Removable Rotor for cleaning.

Specifications

 * Universal Electrical Input: 220 VAC or 120 VAC, 60 Hz, 1.4 Amps, 1 Phase
 * 24 VDC Gear Motor: 1/10 HP, 450 RPM, Variable Speed
 * Size and (Weight): 9 1/2" x 10" x 10 1/2", (12 Pounds)
 * Percentage Dial for Flow Settings: 20% - 100%
 * Maximum Pressure: 20 PSI
 * Transfer Rate of Water at 20 PSI Head Pressure: Pumps 1.4 - 7.0 LPM using
   3/8" ID x 5/8" OD Tubing, 0.7 - 3.5 LPM using 1/4" ID x 1/2" OD Tubing
 * Forward-Off-Reverse Switch: Switch has a hesitation center that prevents
   operation of the lever through the Off position until pressure is momentarily
   relieved.

Battery Powered Peristaltic Pump - 6.0 LPM - 20 PSI
Discontinued - Repair Services Offered
Alternate pump: PM6000RB Portable Battery Peristaltic Pump

 * Model MP-V400: Portable Peristaltic Pump
 * Silicone Tubing: 10 feet long, 3/8" ID x 5/8" OD
   
 * Detachable cord set for 120 VAC connection: 2.5 meters long, C-13 connector
   plugs to the portable unit
 * Registration Card for the Manufacturer's 2 year Warranty
 * Operator's Manual - Chemical Compatibility Chart
 * Free shipping and handling within the continental United States for ground
   delivery.
 * Standard pump has fixed rollers. It will cost $20 extra for a pump with
   Spring Loaded Rollers.
 * $160 Optional Remote Jack with 5 ft. cord to a Foot Switch for remote On -
   Off operation. Foot Switch easily connects and detaches from pump for normal
   operation.
 * Offer optional rotor configurations based upon desired line pressures and
   applications.
 * The portable peristaltic pump is powered by an internal battery or 120 VAC
   connection. Battery is quickly charged when plugged in and switched OFF.
 * Max flow is 6 Liters / Minute.
 * The pump will operate for 40 minutes on a single charge at max flow rate.
   Requires just 30 minutes to recharge the battery.
 * RolaTec hose pumps have a rotor with 4 rollers to progressively squeeze
   tubing to produce flow. Fluid travels through just the interior of the tubing
   without wetting other peristaltic pump components.
 * Some of the uses include shallow well sampling, dispensing inks, paints,
   glues, corrosive chemicals, sterile fluids, chemical dispensing and abrasive
   slurry transfer.
 * Variable Flow Control with a 80-400 RPM continuous duty drive. Accurate to
   within 10%
 * 25 feet of lift with 1/4" ID tubing, 15 feet of lift with 3/8" ID tubing.
 * Quick peristaltic tubing replacement. No tools are required. Simply insert
   tubing and close the hood. Spring loaded V-Clamps grip the exterior portion
   of the tubing to secure it during operation.

Specifications

 * Electrical Input: 120 VAC, 60 Hz, 1.4 Amps, 1 Phase
 * Rechargeable Battery: 12 V, 7.2 Ah, Sealed Lead Acid
 * 12 VDC Gear Motor: 1/10 HP, 400 RPM, Variable
 * Size and (Weight): 9 1/2" x 10" x 10 1/2", (17 Pounds)
 * Percentage Dial for Flow Settings: 20% - 100%
 * Maximum Pressure: 20 PSI
 * Transfer Rate of Water at 20 PSI Head Pressure:
   Pumps 1.2 - 6.0 LPM using 3/8" ID x 5/8" OD Tubing,
   0.6 - 3.0 LPM using 1/4" ID x 1/2" OD Tubing
 * Forward-Off-Reverse Switch: Switch has a hesitation center that prevents
   operation of the lever through the Off position until pressure is momentarily
   relieved.


Patented Pump Head Enhances Product Performance




 * Patented pump head (US Patent # 5,110,270) increases tubing life, bearing
   life and over all efficiency of the Portable Tubing Pump.
   
 * Is self priming with a maximum lift of 25 feet making it excellent for
   collecting samples from barrels, tanks and wells. Meets EPA flow requirements
   of at least 2 feet per second transfer velocity
 * Delivers 0.6 - 6.0 LPM depending upon ID of the tubing and flow setting.
 * Standard rotor will maintain set flow rates up to 20 psi head pressure for
   1/8" wall tubing.
 * 8.0 Ah sealed lead acid battery that can provide enough energy to transfer 6
   LPM of water for 40 minutes at room temperature.

 
 * Takes only 30 minutes to charge the internal battery. Circuitry senses a
   fully charged battery and limits excessive current. An indicator light
   displays rapid or float stages of charging.
 * Fan cooled aluminum enclosure with a powder coated paint finish. The unit is
   vented on the bottom so is only splash resistant from above.
 * Optional Pump Head with Spring Loaded Rollers that will accept tubes with
   1/16" to 1/8" wall thickness. Used for low pressure fluid transfer
   applications, where battery life is critical. Increases battery operation
   from 40 minutes to 45 minutes and the pump will operate in a quieter manner.
   (Add $20.00 to the total price of package)

RolaTec Pump Co.
855 Village Center Dr., #321
North Oaks, MN 55127-3016
Ph: 651-334-3250
morrick@rolatecpump.com

Back to the Top

© Copyright 2003 - 2023 RolaTec, All Rights Reserved