www.dropbox.com Open in urlscan Pro
2620:100:601b:18::a27d:812 Public Scan

Back to summary

URL:
https://www.dropbox.com/scl/fi/ugl0n53tara6xpc2j6crn/WestcountyPopeyesFinalAAN4.10.24-LL-Approved-Plans-Full-Set.pdf?rlk...
Submission: On August 13 via manual (August 13th 2024, 1:20:33 pm UTC) from IN — Scanned from US

Form analysis
0 forms found in the DOM

Text Content

West County Popeyes Final AAN 4.10.24 (LL Approved Plans Full Set) (BID SET)pdf
West County Popeyes Final AAN 4.10.24 (LL Approved Plans Full Set) (BID SET)pdf
File
Edit
View
Help
Share

Log inSign up
Page 1 of 190

Edit PDFDrawHighlightAdd text

Comment
59%
Wanting Jin shared this file. Want to do more with it?Log inSign up

1.
Email:
office@memdesigninc.comwww.MEMDesignInc.comTRANSMITTAL:Date:4.10.24Property:West
CountyMall Office: 314.288.2020Store:PopeyesVia:emailFrom:MEM Design,
Inc.office@memdesigninc.comRe:Popeyes–FinalPermit info:Submit all insurance
and permit information to mall operations prior to
construction/installation.Remarks:FinalDrawings—approved as noted–see
comments on drawing.

2.
TOILETABOVE00'-0"FIN. FLR.CELEVATION TARGETACCESSORIESGENERALNOTES3).ANOTES
WHICH APPLYCCENTERLINESURFACETO ALL
DRAWINGS.ELEVATIONDESCRIPTIONINDICATIONMOULDINGSCONSTRUCTIONNOTESIDENTIFICATIONMILWORKDOOR1.A1INDICATIONELEVATIONPLAN
DETAILINDICATIONA-00A-00A-00NOTES WHICH APPLYON DRAWINGS WHERETO SPECIFIC
ITEMSINDICATED.SHEET NUMBERDETAIL AREADETAIL NUMBERSHEET NUMBERELEVATION
NUMBERSHEET NUMBERSECTION NUMBERSYMBOLS LEGEND:PROJECT INFORMATION:DRAWING
INDEXBUILDING DEPT.HEALTH DEPT.L.L.LEASE LINEDIAMETERCODE
INDEXLANDLORDPROJECT COORDINATORSECTION CUTARCHITECTURAL
SPECIFICATIONSELECTRICAL SPECIFICATIONSAS1.0E3.0P2.0COVER SHEETFINISH
SCHEDULE AND DETAILSEQUIPMENT PLAN & SCHEDULESTOREFRONT ELEVATIONSSALES
COUNTER SECTIONS AND DETAILSC1.0A1.1A2.0A3.0A4.0A1.0FLOOR AND CLG. PLAN &
NOTESE2.0ELECTRICAL PANEL SCHEDULES, RISER DIAG. & DETAILSM1.0MECHANICAL
PLANS, DETAILS, & NOTESPLUMBING WASTE AND WATER ISOMETRICS P1.0PLUMBING
WASTE AND WATER PLANSTENANTCOORDINATE WITH VENDOR (VERIFY W/ TENANT)SEE
EQUIPMENT SCHEDULE FOR MORE INFO.COORD. PERMITS & INSTALLATION W/ SIGN
VENDOR1.SALES/KITCHEN DOOR(S) & FRAME1.CONDUIT INTO SPACEC.DIFFUSERSEXHAUST
HOOD ANSUL SYSTEMFIRE ALARM AND SMOKE CONTROL SYS.EXHAUST HOOD (BLACK IRON)
DUCT WORKEXHAUST HOODS, SS PANT LEGSROOF PENETRATIONSSPRINKLER SYSTEM
6.9.5.4.3.2.DUCTWORK HVAC UNITLIGHT FIXTURES AND LAMPS4. TRANSFORMER AND
GEAR6.TELEPHONE WIRINGMECHANICALHVAC SYSTEMA.B.1.METERPANELS5.2.3.SEE
ELECTRICAL DRAWINGSD. COUNTER TOP MATERIALSALES AREA COUNTER TOILET RM.
FIXTURES/ACCESSORIESFINAL GAS CONNECTIONS TO EQUIP.6.KITCHEN/SALESINTERCOM
SYSTEMSTOREFRONT SIGNSFIRE EXTINGUISHER4.MENU
BOARDELECTRICAL7.6.EQUIPMENT2.3.1.WATER PIPINGA. GYP. BD.B. LAY-IN
TILEUNDERSLAB ROUGH-IN FOR WASTEFINAL CONNECTIONS & VENTSGAS PIPING AND
ACCESSORIES1.5.4.3.2.PLUMBING6.CEILING3.FLOORSA. WATER PROOF MEMBRANEA.
PAINTC. TRIMB. TILE5.BASE 4.FINISHESA. 5/8" TYPE "X" GYP. BD.TAPING AND
SPACKLINGSERVICE DOORRESTROOM DOOR2.WALLSFINISHES1.2.3.COORDINATE WITH
TENANT.LOCATE PER FIRE MARSHALLRESPONSIBILITY SCHEDULED. SALES LOW WALL2.
TEMPORARY UTILITIES5.POURED CONCRETEMETAL STUDSA. DEMISING WALLSB. INTERIOR
PARTITION / FURRINGROOF FRAMING FOR MECH. UNITSDOORS2.CARPENTRY1.4.
TEMPORARY ENCLOSURESAW CUT SLAB/CORE DRILL3. REINFORCING FABRICCONCRETE
SLAB CORE DRILLING4. CONCRETE SLAB2. VAPOR BARRIER1. SAND
PADDEMOLITIONSPACE WORK2.1.GENERAL REQUIREMENTS1. PERMITS AND
FEESITEM:EXISTINGLANDLORDTENANTTENANTSCONTFURNISHEDLANDLORDTENANTTENANTSCONTN/AINSTALLEDREMARKS7.ROOF
PROTECTION ACCESSORIESB. 5/8" MOISTURE RESISTANT GYP. BD.8.EXH. HOOD MUA
SUPPLY SYSTEMINSTALL SPEAKER/STROBE SYSTEM PER L.L. REQUIREMENTSG.C. TO
SUPPLY SAMPLES TO OWNER FOR APPROVALC. FINISHESSEE PLAN AND STANDARD
MATERIAL SCHEDULEC. SALES COUNTERSEE PLUMBING DWG.SEE PLUMBING DWG.SEE
PLUMBING DWG.SEE PLUMBING DWG.SEE PLUMBING DWG.SEE REFLECTED CEILING SEE
REFLECTED CEILING SEE ELECTRICAL DRAWINGS5.SEATINGSEE ELECTRICAL DRAWINGSAS
REQUIRED TO INSTALL UTILITIESINSTALL/ MODIFY EXISTING SYSTEM PER L.L.
REQUIREMENTSSEE DEMOLITION PLANSEE PLANSAS REQUIRED TO INSTALL UTILITIES,
CORE DRILL ONLYSEE SCHEDULESEE ELECTRICAL DRAWINGSC. QUARRY TILE FLOORINGA.
COVED QUARRY TILEINSTALL NEW GYP. BD. AS REQUIRED. SUBSIDIARY PERMITS AND
FEES3.ROOF FRAMING FOR NEW MECH. UNITSWATER TEST TO BE DONE ON ALL ABOVE
GROUND SPACES7.SEWER AND GREASE LINE CLEANING8.SAFE INSTALLATION AND
WATERPROOF CAULKING AROUND BASE 7.NETWORK WIRING/LOW VOLTAGEEXHAUST AND
MAKE UP AIR FANSINTERNATIONAL RESTAURANTMANAGEMENT GROUP4531 PONCE DE LEON
BLVD #300CORAL GABLES, FL, 33146TEL: (305) 476-1611 EXT 104FAX: (305)
476-9622TYPE OF CONSTRUCTIONLEASED AREA:PROVIDED EXIT WIDTH:OCCUPANCY
CLASS:U 465 UL DESIGN NUMBER FOR TENANT SEPARATION.BUILDING CODES:REQUIRED
EXIT WIDTH:(1) 36" INCHES1029 SF / 200 SF = 5 OCCUPANTSOCCUPANT LOAD:(1)
36" INCHESTYPE II-B, FULLY SPRINKLEREDGROUP 'B'1029 S.F.DAVID HIATT,
ARCHITECTTEL. 813.333.2717902 GOODRICH AVENUE,SARASOTA, FL 34236MOSAD
ELEWA3386 CLARINE WAY WESTDUNEDIN, FL 34698TEL: 813-245-6554SEPARATE
PERMITSSEPARATE PERMIT APPLICATION IS REQUIRED FOR ANY OF THE FOLLOWING
WORK:FIRE SPRINKLER SYSTEMFIRE ALARM SYSTEMHOOD FIRE SUPPRESSION
SYSTEMSIGNSE1.0ELECTRICAL POWER AND LIGHTING PLANSE1.1DATA AND
COMMUNICATION PLANSPECIAL NOTES:13. PERFORMANCE BOND AND PAYMENT BONDS ARE
REQUIRED FOR THIS PROJECT.3. ERRORS AND OMISSIONS ANY DISCREPANCIES OR
OMISSIONS ON THESE DOCUMENTS MUST BE BROUGHT TO THE ATTENTION OF THE
ARCHITECT PRIOR TO THECOMMENCEMENT OF CONSTRUCTION AND BID TO OWNER.
FAILURE BY THE CONTRACTOR TO IDENTIFY DISCREPANCIES OR OMISSIONS WILL THEN
BECOME THERESPONSIBILITY OF THE CONTRACTOR.4. COMPLY WITH DESIGN
CRITERIAGENERAL CONTRACTOR TO FOLLOW AND COMPLY WITH LANDLORD'S TENANT
DESIGN CRITERIA AND REQUIREMENTS FOR ALL EXHIBITS. ( IF APPLICABLE. )5.
NOTESALL NOTES ON ANY PORTION OF THESE DOCUMENTS APPLY TO ENTIRE DOCUMENT
WHETHER OR NOT THEY ARE REPEATED IN OTHER AREAS.6. WORK, MATERIALS AND
CONSTRUCTION METHODSALL WORK, MATERIALS AND CONSTRUCTION METHODS SHALL
CONFORM WITH ALL GOVERNING AUTHORITIES HAVING JURISDICTION.7. APPROVAL BY
GOVERNING AUTHORITIESAPPROVAL OF THESE DRAWINGS BY GOVERNING AUTHORITIES
DOES NOT RELEASE THE CONTRACTOR FROM COMPLYING WITH ALL APPLICABLE CODES
ANDSTANDARDS.8. INSTALLATION BY GENERAL CONTRACTORALL MATERIALS AND
EQUIPMENT ITEMS SUPPLIED BY THE OWNER/TENANT ARE TO BE INSTALLED BY GENERAL
CONTRACTOR UNLESS INDICATED OTHERWISE.9. MATERIALSALL MATERIALS SHALL BE
NEW AND FIRST CLASS. ALL WORK AND EQUIPMENT ITEMS SHALL BE WARRANTIED BY
THE CONTRACTOR FOR A MINIMUM OF ONE YEAR FROMTHE DATE OF FINAL ACCEPTANCE.
EXCEPT FOR MANUFACTURE'S WARRANTY WHICH MAY BE LONGER.10. COMBUSTIBLE
MATERIALSNO COMBUSTIBLE MATERIALS ARE PERMITTED ABOVE CEILING.11. FIRE
EXTINGUISHERSCAPACITY AND RATING AS REQUIRED BY N.F.P.A. PAMPHLET #10 AND
LOCAL AUTHORITIES. LOCATE PER LOCAL AUTHORITIES AND N.F.P.A. 10.12.
MISC.PRIOR TO INSTALLING SHELVING IN REFRIGERATOR, T.G.C. TO WASH DOWN
(SPONGE) INTERIOR THREE (3) TIMES WITH A SOLUTION OF 50% VINEGAR AND
50%WATER. SETREFRIGERATOR TO OPERATE AT 34 - 38 F RANGE.1. SOME SPECIFIED
ITEMS (SUCH AS FLUORESCENT FIXTURES IN SALES COUNTER, WALL STANDARDS,
SHELVING BRACKETS, CERAMIC TILE, ETC.) MAY REQUIRE LONGDELIVERY1. THESE
DOCUMENTS REPRESENT THE SCOPE OF WORK TO BE TO PERFORMED BY THE GENERAL
CONTRACTOR (UNLESS OTHERWISE NOTED. )2. CHECK DIMENSIONS AND CONDITIONS IN
THE FIELD ALL DIMENSIONS AND CONDITIONS OF THIS JOB SHALL BE FIELD CHECKED
BY GENERAL CONTRACTOR WHO WILL BERESPONSIBLE FOR SAME. ANY DISCREPANCIES
SHALL BE REPORTED TO THE ARCHITECT PRIOR TO THE START OF CONSTRUCTION.
COSTS DUE TO A FAILURE OFREPORTING THESE DISCREPANCIES WILL BE THE
RESPONSIBILITY OF THE GENERAL CONTRACTOR.14. THE GENERAL CONTRACTOR SHALL
BE SOLELY RESPONSIBLE TO SECURE AND PROTECT FROM DAMAGE, ALL ITEMS ON THE
PREMISES. INCLUDING, BUT NOT LIMITED TO; CONSTRUCTION MATERIALS,
LIGHTFIXTURES, FOOD SERVICE EQUIPMENT, EQUIPMENT, AND THE FURNITURE
PACKAGE. AFTER RECEIPT ON JOB SITE, ANY LOST, STOLEN OR ITEMS DAMAGED LATER
BY SUBCONTRACTORS OR OTHERS IN THEBUILDING, SHALL BE REPLACED OR REPAIRED
AT THE GENERAL CONTRACTOR'S SOLE EXPENSE. THE GENERAL CONTRACTOR SHOULD
NOTIFY AND RELATE THIS INFORMATION AND REQUIREMENT TO ALL TRADESAND
SUBCONTRACTORS ON SITE.15. IT IS THE RESPONSIBILITY OF THE GENERAL
CONTRACTOR TO RECEIVE AND UNLOAD PRODUCT AND MATERIALS SUPPLIED BY OTHERS
AT THE JOB SITE. IMMEDIATELY INSPECT DELIVERED PRODUCTS ANDEQUIPMENT FOR
SHIPPING DAMAGE, INCLUDING CONCEALED DAMAGE PRIOR TO SHIPPER LEAVING
PREMISES. ANY PRODUCT OR MATERIALS FOUND TO BE DAMAGED AFTER THE SHIPPER
HAS LEFT THEPREMISES, WILL BE THE SOLE RESPONSIBILITY OF THE GENERAL
CONTRACTOR TO REPLACE. RECORD ANY SHORTAGES, DAMAGED OR DEFECTIVE
MATERIALS. SAVE ALL PACKING OF DAMAGED PRODUCTS UNTILCLAIMS ARE FINALIZED.
IMMEDIATELY NOTIFY CHARLEY'S PROJECT MANAGER AND FRANCHISEE OF ANY DAMAGED
MATERIALS RECEIVED. IMMEDIATELY FILE A DAMAGE CLAIM WITH THE APPROPRIATE
SHIPPINGCOMPANY.16. GENERAL CONTRACTOR SHALL HIRE A PROFESSIONAL CLEANING
COMPANY FOR FINAL CLEAN UP BEFORE TURNING COMPLETED STORE OVER TO
FRANCHISEE.17. GENERAL CONTRACTOR AND HIS JOB SUPERVISOR SHALL TEST ALL
EQUIPMENT FOR PROPER OPERATION, IN THE PRESENCE OF THE FRANCHISEE, BEFORE
TURNING COMPLETED STORE OVER TOFRANCHISEE.18. PROVIDE AIR BALANCING REPORT
TO ON-SITE OPERATING MANAGER AS REQUIREDLANDLORD NOTESGENERAL NOTESKEY
PLANCBL & ASSOCIATES PROPERTIES, INC.CBL CENTER, SUITE 5002030 HAMILTON
PLACE BOULEVARDCHATTANOOGA, TN 37421-6000TEL: (800) 333-7310 EXT. 620FAX.:
(423) 954-2984ATTN: LAURA FARREN - SR. LEASING MANAGEREMAIL:
Laura_Farren@cblproperties.comARCHITECTM3.0HOOD FAN DRAWINGM4.0HOOD FAN
DRAWINGD1.0DEMOLITION PLANM2.0HOOD DRAWINGM1.1MECHANICAL DETAILS2018
MISSOURI BUILDING CODE IBC 20182015 MISSOURI MODULAR PLUMBING CODE IPC
20152015 MISSOURI MODULAR MECHANICAL CODE IMC 20152015 MISSOURI FUEL GAS
CODE IFGC 20152018 MISSOURI ENERGY CODE IECC 20182014 MISSOURI MODULAR
ELECTRICAL CODE NFPA 70, 2014WEST COUNTY CENTER89 WEST COUNTY CENTER DRIVE,
SPACE FC14DES PERES, MISSOURI 63131CITY OF DES PERES12325 MANCHESTERDES
PERES,MO 63131P: (314) 835-6130PERMITS@DESPERESMO.ORGSAINT LOUIS COUNTY
DEPARTMENTOF PUBLIC HEALTHDIVISION OF ENVIRONMENTALPROTECTION FOOD
ANDENVIRONMENTAL PROGRAM6121 N. HANLEY RD.,BERKELEY, MO.,
63134314-615-8900LANDLORD PROVIDED PUBLIC RESTROOMSWITHIN 200' FROM
SPACEC1.0COVER SHEET902 GOODRICH AVENUE,S A R A S O T A , F L 3 4 2 3 6T E
L . 8 1 3 . 3 3 3 . 2 7 1 7WEST COUNTY CENTER89 WEST COUNTY CENTER DRIVE,
SPACE FC14DES PERES, MISSOURI 63131Field Verification Requirement:Tenant,
Tenant’s Design Team, andTenant’s Contractors shall field verify allfield
conditions prior to the start of anyconstruction. Be advised that all
changesand modification to the Landlord’sapproved drawings shall be
resubmittedto Landlord for re-approval. Anyconstruction completed with out
Landlordapproval shall be corrected as approvedby Landlord at Tenant’s
expense.

3.
D1.0DEMOLITION PLAN902 GOODRICH AVENUE,S A R A S O T A , F L 3 4 2 3 6T E L
. 8 1 3 . 3 3 3 . 2 7 1 7WEST COUNTY CENTER89 WEST COUNTY CENTER DRIVE,
SPACE FC14DES PERES, MISSOURI 63131EXISTING DOOR TO REMAIN, RESTORE TO LIKE
NEW CONDITION.EXISTING ELECTRICAL PANELS AND TRANSFORMER TO REMAIN. SEE
ELECTRICAL DRAWINGS FOR EXTENT OF MODIFICATION TO EXISTING
SYSTEM.DEMOLITION NOTESIN SALES AREA, GENERAL CONTRACTOR SHALL REMOVE
EXISTING ALL WALL FINISHES EXERCISE GREAT CARE IN NOT DAMAGING THE FIRE
RATED DRYWALL AT THE DEMISING WALLS. IFDAMAGED, G.C. SHALL REPAIR AS
NECESSARY AND PREPARE THE SPACE TO RECEIVE NEW FINISHES PER FINISH
SCHEDULE. STAINLESS STEEL PANELS ON KITCHEN WALLS SHALL REMAIN.2EXISTING
SALES COUNTER TO BE REMOVED, GENERAL CONTRACTOR SHALL INSTALL NEW COUNTER
PER SHEETS A3.0 AND A4.0.4126118918519167GENERAL CONTRACTOR SHALL REMOVE
EXISTING LIGHTING FROM KITCHEN AREA AND INSTALL NEW FIXTURES PER REFLECTED
CEILING PLAN.EXISTING A/C DIFFUSERS AND GRILLS TO BE REMOVED.. REFER TO
MECHANICAL DRAWING FOR THE EXTENT OF MECH. SYSTEM MODIFICATION.17EXISTING
FLOOR SINK/DRAINS , REFER TO PLUMBING PLANS FOR NEW PLUMBING
CONFIGURATION.103EXISTING NEUTRAL PIERS TO REMAIN. GENERAL CONTRACTOR SHALL
BE RESPONSIBLE FOR ANY REPAIRS/PATCHING OF THE NEUTRAL PIER IF DAMAGED
DURING CONSTRUCTION. EXISTING QUARRY TILE FLOORING TO REMAIN, RESTORE TO
LIKE NEW CONDITION. EXISTING CEILING IN SALES AREA TO REMAIN. REFER TO
REFLECTED CEILING PLAN.EXISTING EXISTING LAY-IN CEILING IN KITCHEN AREA TO
BE REMOVED, INSTALL NEW PER REFLECTED CEILING PLAN.GENERAL CONTRACTOR SHALL
REMOVE EXISTING LIGHTING FROM SALES AREA AND INSTALL NEW FIXTURES PER
REFLECTED CEILING PLAN.14GENERAL CONTRACTOR SHALL REMOVE EXISTING
NONBEARING PARTITION WALLS AS INDICATED. DISCONNECT AND REMOVE ALL EXISTING
ELECTRIC, CAP OFF PLUMBING (IF ANY) WITHINREMAINING WALLS OR ABOVE CEILING,
AS REQUIRED. PATCH AND REPAIR REMAINING WALL, CEILING, AND FLOOR SURFACES
TO ACCEPT FINISHES AS INDICATED.ALL ABANDONED OR UNUSED CONDUIT / PIPE /
ELECTRICAL / DUCT, CONTROLS, HVAC/RTU, ETC., WITHIN OR SERVING THE PREMISES
MUST BE COMPLETELY REMOVED TO POINT OF ORIGINAND CAPPED UNLESS OTHERWISE
NOTED AND TO SATISFY CODE. DO NOT ABANDON IN PLACE, INCLUDING ALL INTERIOR
PARTITIONS AND SUBSEQUENT TRACK, UNISTRUT, GYP. WB., ETC.,MUST BE FULLY
REMOVED.VERIFY ANY DEMOLITION WORK REQUIRED BY THE LANDLORD THAT IS NOT
SHOWN ON PLANSWITH MALL OPERATIONS MANAGER, PRIOR TO BID.VERIFY ANY WORK
REQUIRED TO PROTECT LANDLORD AND TENANT FIRE ALARM, LIFE SAFETYSYSTEM
WIRING AND DEVICES, SPRINKLER PIPING, DUCTWORK, PLUMBING,
COMMUNICATIONSYSTEM WIRING, ETC. DURING DEMOLITION AND NEW CONSTRUCTION
WITH MALL OPERATIONSMANAGER AND TENANT'S ARCHITECT PRIOR TO BID/START OF
WORK.TENANT TO REMOVE ANY EXISTING OR NEWLY ABANDONED MATERIALS, EQUIPMENT,
PIPING,DUCTS AND WIRING FROM PREMISES. CAP SERVICE AT POINT OF ORIGIN AND
COORDINATETHIS WORK WITH LANDLORD'S ON-SITE REPRESENTATIVE.REMOVE EXISTING
MENU BOARD TV SCREENSENSURE THAT ALL FIRE PROTECTION SYSTEMS AREOPERATIONAL
AT ALL TIMES DURING THIS DEMOLITIONOR ALTERATION.NOTE:LANDLORD NOTES
EXISTING WATER HEATER TO REMAIN.EXISTING MALL FLOORING TO REMAIN. GENERAL
CONTRACTOR TO RESTORE TO LIKE NEW CONDITION AND PATCH AND REPAIR AS
NECESSARY ALONG LEASE LINE. EXISTING WALK-IN COOLER TO REMAIN.DEMOLITION
PLANSCALE: 1/4" = 1'-0"20GENERAL CONTRACTOR SHALL REMOVE ALL EXISTING
EQUIPMENT.11AGENERAL CONTRACTOR SHALL VERIFY THE CONDITION OF EXISTING
INTERIOR PARTITION TO BE REUSED, INSPECT MTL. STUDS ANDGYP. BOARD FROM ANY
DAMAGE, REPLACE AS REQUIRED.ITEM15 EXISTING 3 COMP SINK AND GREASE TRAP TO
REMAIN. RESTORE GREASE TRAP TO LIKE NEW CONDITION.CEILING PANELS,
TYP.NOTE:INSTALLATION & LATERAL BRACING OFSUSPENDED TILE CEILING SYSTEM
TOBE IN ACCORDANCE WITH RGA 4-74.RIGID VERTICAL STRUT, MAY BESTEEL STUD,
BLACK IRON, EMTOR OTHER APPROVED EQUAL12 GA. WIRE SPLAYED IN FOURDIRECTIONS
AT 45° AT 12'-0"O.C. EACH WAY8 GA. VERTICAL WIRE HANGERAT 4'-0" O.C. EACH
WAY, TYP.NOTE:1. VERTICAL STRUT: A STRUT FASTENED TO THE MAIN RUNNER, SHALL
BE EXTENDED &FASTENED TO THE STRUCTURAL MEMBERS SUPPORTING THE ROOF OR
FLOOR ABOVE.THE STRUT SHALL BE ADEQUATE TO RESIST THE VERTICAL COMPRESSION
INDUCED BYHORIZONTAL RESTRAINT BRACING WIRES.2. THESE HORIZONTAL RESTRAINT
POINTS SHALL BE PLACED 12'-0" OR LESS O.C. INBOTH DIRECTIONS WITH POINTS
WITHIN 6'-0" FROM ANY WALL.SCALE: N.T.S.SEISMIC CEILING DETAILMAIN RUNNER
ANCHOR TO STRUCTUREABOVE8 GA. VERTICAL HANGERWIRE AT 48" O.C.1/2" EMT.
COMP. STRUT TIGHTTO STRUCT. ABOVE.COMPRESSION STRUT REQ'D.AT EACH SEISMIC
RESTRAINT12'-0" O.C. EACH WAY.3/4" EMT NOTCH OVER MAINRUNNER.CROSS TEEDRILL
5/32" HOLE FOR 1/8"BOLT & LOCK NUT AFTERCEILING IS LEVELEDSUSPENDED STRUT
DETAILHEAVY DUTY T-BAR GRIDSYSTEM PERIMETER CLOSUREANGLEMETAL STUD W/ 5/8"
TYPE'X' GYP. BOARD.TYPICAL CEILING GRID AT WALL
(UNRESTRAINED)2"3/4"6"PERIMETERHANGER WIRE8" MAX.6 1POP RIVETTYPICAL
CEILING GRID AT WALL (RESTRAINED)PERIMETERHANGER WIRE8" MAX.6 1POP
RIVETHEAVY DUTY TEESCALE: N.T.S.2" MIN.3/4" MAXHEAVY DUTY PERIMETERCLOSURE
ANGLESIZE1/2"0 X 22 GA.0 X 20 GA.2"3"0 X 18
GA.23'-3"17'-3"11'-6"14'-6"7'-0"8'-6"5'-0"MAX HT3'-0"4'-3"COMPRESSION STRUT
SIZING CHART1 1/4"0 X 20 GA.2 1/2"0 X 18 GA.0 X 20 GA.3/4"0 X 22 GA.MIN. 8
GAUGE WIRESFINISH FLOORSUSPENDED CEILING4'-0"12'-0" MAX.8" 8"FIN. CLG.
HGT.4'-0" MIN.8" 8"12'-0"TIE TWO ADJACENT WALL TO CEILINGMAIN & CROSS
RUNNERS.8"4'-0"ELEVATIONPLANNOTE:45NOTE:FOR ROOMS LARGER THAN 25' X 25', A
2"'DONN' WALL ANGLE SHALL BE USED ATTWO INTERSECTING SIDES, OPPOSITETHE TWO
SIDES ATTACHED TOSTANDARD WALL ANGLE.IN LIEU OF THE ABOVE, A STABILIZERBAR
MAY BE USED ABOVE GRID OR GRIDMAY BE TIED TOGETHER WITH 18 GA.WIRE FROM
RUNNER TO RUNNER,CONTINUOUSLY AT THE TWO SIDES.SCALE: N.T.S.TYPICAL CEILING
SUSPENSION SYSTEMCOMPRESSION STRUTSAT 12'-0" O.C. EA. WAY3/8" MIN.
CLEARCROSS RUNNEROR MAIN RUNNERSCALE: N.T.S.SCALE: N.T.S.(4) 8 GA., 45°
SPLAY WIRESAT EVERY STRUT, 12'-0"O.C. EA.
DIRECTION19191918568ABOVE151514222221016131111321A1A19202122113111ABOVE6710129101013GENERAL
CONTRACTOR SHALL REMOVE PREP SINK AND HAND SINKS.21GENERAL CONTRACTOR SHALL
REMOVE EXISTING EXHAUST HOOD. UTILIZE EXISTING DUCTWORK AND FANS ON ROOF
FOR NEW EXHAUST HOOD.221722GENERAL CONTRACTOR SHALL REMOVE EXISTING HOOD
SOFFIT.LJIHGFEDCBADO NOT CUT ON EXISTING STRUCTURAL WORK IN A MANNER
RESULTING IN A REDUCTION OF LOAD CARRYING CAPACITY OR LOAD/DEFLECTION
RATIO. NOTIFY LANDLORD REP. OF ALLSTRUCTURAL PROPOSED CUTS PRIOR TO
EXECUTION TO OBTAIN APPROVAL.IT WILL BE THE GENERAL CONTRACTORS
RESPONSIBILITY TO COORDINATE WITH LANDLORD ON-SITE OPERATIONS DIRECTOR AND
TENANT BELOW, BEFORE BELOW SLAB WORK IS TO BE DONE.IN ALL AREAS WHERE
DEMOLITION CAUSES UNEVENNESS IN THE FLOOR SLAB, PERFORM THE NECESSARY WORK
REQUIRED TO PROVIDE A SMOOTH SLAB PREPARED TO RECEIVE NEW FINISHES.PROTECT
ALL STRUCTURAL MEMBERS FROM DAMAGE, AND BRACE ALL EXISTING STRUCTURES AS
NEEDED DURING THE DEMOLITION.MAINTAIN COMPLETE SECURITY OF THE JOB SITE
WHILE JOB IS IN PROGRESS AND UNTIL JOB IS COMPLETE.IT SHALL BE THE
RESPONSIBILITY OF THE CONTRACTOR TO LOCATE ALL EXISTING UTILITIES WHETHER
SHOWN HEREIN OR NOT, AND TO PROTECT THEM FROM DAMAGE. THECONTRACTOR SHALL
BEAR ALL THE EXPENSES OF REPAIR OR REPLACEMENT OF UTILITIES OR OTHER
PROPERTY DAMAGE BY OPERATIONS IN CONNECTION WITH EXECUTION OF THE WORK.
INACTIVE OR ABANDONED UTILITIES SHALL BE CAPPED IN ACCORDANCE WITH LOCAL
RESTRICTIONS, REMOVE INACTIVE SERVICES (PLUMBING, ELECTRICAL, MECHANICAL,
ETC.) ASREQUIRED TO MAINTAIN OPERATION.ALL MATERIAL TO BE DISPOSED OF IS TO
BE DONE BY THE CONTRACTOR OFF THE PROJECT SITE IN ACCORDANCE WITH L.L.
REQUIREMENTS & LOCAL RESTRICTIONS UNLESS OTHERWISE NOTED HEREIN.EXERCISE
EXTREME CAUTION IN DEMOLITION, COST OF REPAIR TO ANY ADJACENT CONDITIONS
DAMAGED AS A RESULT OF THIS DEMOLITION SHALL BE THE RESPONSIBILITY OF THE
CONTRACTOR.ALL AREAS SHALL BE KEPT IN A BROOM CLEAN CONDITION AT ALL
TIMES.DEMOLITION WORK SHALL BE EXECUTED IN CONFORMANCE WITH THE LOCAL
BUILDING CODE AND LANDLORD'S STANDARD PROCEDURES.FIELD VERIFY ALL EXISTING
CONDITIONS AND NOTIFY ARCHITECT OF ANY DISCREPANCIES IN WRITING PRIOR TO
ONSET OF DEMOLITION.KANY EXISTING TO REMAIN FIRE ASSEMBLIES DAMAGED DURING
DEMOLITION SHALL BE REPAIRED TO MEET ORIGINAL FIRE PROTECTION
REQUIREMENT.GENERAL DEMOLITION NOTES23GENERAL CONTRACTOR SHALL REMOVE
EXISTING FRONT COUNTER LOW WALL.424REMOVE EXISTING COUNTER SWING GATE AND
DOOR.13202020202323232424

4.
24"x36"4TIERS4TIERS24"x60"24"x60"4TIERS24"x60"4TIERS4TIERS24"x60"4TIERS24"x60"4TIERS24"x60"REFER
TO COUNTERPLAN ON SHEET A4.013'-2"2'-11"18'-11"35'-0"5'-9"12'-2"9'-0
1/2"5"7'-7"9'-0
1/2"23'-6"1'-5"3'-0"3'-0"3'-0"5'-9"2'-11"5"5'-9"1'-4"5'-4"11'-6"27'-3"33'-0"11'-8"8'-9"12'-1"9'-10
1/2"8'-9"3'-8"29'-1"22'-10"2'-4"2A2A1A333222111'-8"111115102105101108108108103103101106101106101101106106106106100105105117117100100LINE
OF EXH.HOOD
ABOVEWALK-INFREEZERWALK-INCOOLER1103A103A106112112106KITCHENSALES1101103'-3"10510111011023'-5
1/2"1051071072A3.01A3.04A3.03A3.06A1.16A1.1106101BBBBBBBBBBBBBBBBB12'-4"
A.F.F.EXISTING GYP. BD. CEILINGGB-1114P-11187'-0" A.F.F.GYP. BD.
SOFFIT7'-0" A.F.F.GYP. BD. SOFFITARECESSED LIGHT FIXTURES,REFER TO ELECT.
DRAWING,TYP.EXHAUST HOOD BELOWAAAAAAAAAEMXEMXEMXDIGITAL MENU
BOARDS116SIGNWALK-INCOOLER BELOWWALK-INFREEZER BELOWAARECESSED
LIGHTFIXTURES, REFER TOELECT. DRAWING, TYP.RECESSED LIGHTFIXTURES, REFER
TOELECT. DRAWING, TYP.119SCP-110'-0" A.F.F.SUSPEND CEILING118113SCP-110'-0"
A.F.F.SUSPEND CEILING113SCP-110'-0" A.F.F.SUSPEND
CEILING118113118101119119A1.0FLOOR PLAN, CEILINGPLAN & NOTES902 GOODRICH
AVENUE,S A R A S O T A , F L 3 4 2 3 6T E L . 8 1 3 . 3 3 3 . 2 7 1 7WEST
COUNTY CENTER89 WEST COUNTY CENTER DRIVE, SPACE FC14DES PERES, MISSOURI
63131FLOOR PLAN SCALE: 1/4" = 1'-0"STORAGE ROOMALL DIMENSIONS SHOWN ONFLOOR
PLAN MUST BE FIELDVERIFIED BY G.C. REPORT ANYFLOOR PLANDISCREPANCY TO
ARCHITECT.SCALE: 1/4" = 1'-0"NOTE:CONSTRUCTION NOTESGENERAL CONTRACTOR
SHALL VERIFY THE CONDITION OF EXISTING INTERIOR PARTITION TO BE REUSED,
INSPECT MTL. STUDS ANDGYP. BOARD FROM ANY DAMAGE, REPLACE AS
REQUIRED.MECHANICAL DIFFUSERS SEE M1.0 FOR EXTENT OF MECHANICAL WORKGENERAL
CONTRACTOR SHALL INSTALL STAINLESS STEEL PANELS FROM TOP OF QUARRY TILE
BASE OVER TO BOTTOM OF THECEILING. SEE ELEVATIONS ON SHEET A3.0 .COORDINATE
WITH OWNER AND SIGN VENDOR FOR NEW STOREFRONT SIGN INSTALL, ALL SIGNAGE TO
BE APPROVED UNDER SEPARATESUBMISSION BY SIGN MANUFACTURER.116GENERAL
CONTRACTOR SHALL INSTALL SALES COUNTER LOW WALL AND INSTALL COUNTER TOP AND
METAL TUBING SUPPORTS ANDFINISHES, SEE SECTIONS ON SHEET #A4.0 INSTALL ALL
FINISHES AS SPECIFIED. ALL JOINTS IN AND AROUND CABINETS, SINKS,VENTILATOR,
ICE BIN, ETC., TO BE SEALED WITH CLEAR SILICONE SEALANT. PROVIDE BLACK
PLASTIC WIRE WAY GROMMETS AT ALLDRILLED OPENINGS.INSTALL NEW WALL TILE PER
ELEVATIONS. WALL TILE, SOFFIT TILE AND BASES IN ROOMS WITH GYPSUM WALLBOARD
WALLS SHALLBE THIN SET WITH ADHESIVE IN ACCORDANCE WITH THE TILE COUNCIL OF
AMERICA, INC. ANSI A1.008.5. NOTE: ALL WALL AND SOFFITTILE SUPPLIED AND
INSTALLED BY GENERAL CONTRACTOR.113112105101100GENERAL CONTRACTOR SHALL
INSTALL 1-1/2" X 1-1/2" 16ga.S/S CORNER GUARDS OR END CAPS FROM FLOOR TO
CEILING AT ALLOUTSIDE CORNERS WITHIN THE PREP. ROOM. SCREW FASTEN AND SEAL
WITH CLEAR SILICONE, TYP., AT ALL OUTSIDE CORNERS. SEEDETAIL 2/A1.1GENERAL
CONTRACTOR WILL CONTACT THE LANDLORD'S SPRINKLER AND/OR FIRE ALARM
CONTRACTOR FOR ALL ADDITIONS ANDREVISIONS TO THE EXISTING SYSTEM AT THE
CONTRACTORS EXPENSE. SPRINKLER CONTRACTOR TO PROVIDE NECESSARYDOCUMENTS FOR
CONSTRUCTION AND PERMITTING UNDER SEPARATE COVER TO THE ARCHITECT,
LANDLORD, AND GOVERNINGAUTHORITIES FOR APPROVAL PRIOR TO MAKING ANY
MODIFICATIONS TO THE EXISTING SPRINKLER SYSTEM. COORDINATEMODIFICATION
SCHEDULE W/LANDLORD FIELD REP. SYSTEM IS TO BE FULLY CHARGED AND
OPERATIONAL WHEN G.C. IS OFF SITE.FINAL SPRINKLER LAYOUT TO BE DETERMINED
BY SUBCONTRACTORS SHOP DRAWINGS.118107114110115119108102GENERAL CONTRACTOR
SHALL VERIFY CONDITION OF EXISTING 1-LAYER OF 5/8" TYPE 'X' GYPSUM
WALLBOARD AT ALL DEMISINGWALLS. ALL DEMISING PARTITIONS ARE TO HAVE 5/8"
TYPE 'X' GYPSUM WALLBOARD FROM FINISH FLOOR TO UNDERSIDE OF
DECK,CONTINUOUS. PER #U465. CONTRACTOR SHALL INSPECT ALL EXISTING DEMISING
WALL METAL STUDS AND AS REQUIRED PROVIDEAND INSTALL SISTER STUDS AT ALL
DAMAGED STUDS.117GENERAL CONTRACTOR SHALL REFURBISH ANY LANDLORD AREAS
DAMAGED AT THE STOREFRONT TO A LIKE NEW CONDITION(NEUTRAL PIERS, NEUTRAL
BANDS, ETC.).106AS REQUIRED, GENERAL CONTRACTOR TO CONTINUE MALL FINISHES
ON FLOOR FROM LEASE LINE TO FACE OF TOE KICK.GENERAL CONTRACTOR SHALL
PROVIDE F.R.T. BLOCKING AS INDICATED ON THE EQUIPMENT SCHEDULE OR AS
NORMALLY REQUIRED.ALL BLOCKING TO BE 3/4" F.R.T. PLYWOOD (MARINE GRADE IN
WET AREAS). SCREW FASTEN BETWEEN METAL STUDS AT NEWPARTITIONS AND FURRED
WALLS. AT DEMISING WALLS, APPLY F.R.T. BLOCKING OVER 5/8" TYPE 'X' GYPSUM
BD. COVER W/ 5/8" GYPBD. AND FINISH WITH F.R.P. TILE. SECURE TO DEMISING
WALL METAL STUDS. SEE BLOCKING DETAILS THIS SHEET.111CUT OUT FOR EQUIPMENT,
VERIFY SIZE PRIOR TO CUTTING COUNTER TOP. SEE EQUIPMENT PLAN AND SCHEDULE
ON SHEET A2.0 FORMORE INFORMATION.GENERAL CONTRACTOR SHALL PROVIDE &
INSTALL F.R.P. ACCORDING TO THE MANUFACTURERS INSTRUCTIONS FOR
APPLICATIONOVER GYPSUM DRYWALL. CONTRACTOR NEEDS TO QUANTIFY "FRP PANELS"
DURING BID PHASE AND PROVIDE A COST PERSQUARE FOOT ALLOWANCE.GENERAL
CONTRACTOR SHALL PROVIDE AND INSTALL 3-5/8" METAL STUD PARTITIONS AT 16"
O.C. WITH 5/8" WATER RESISTANT GYP.BD. ON BOTH SIDES OF WALL; TAPE AND
SPACKLE, WHERE INDICATED. PROVIDE AND INSTALL 12" HIGH CEMENT BD. SAME
THICKNESSAS GYP. BD. AT BOTTOM OF ALL NEW INTERIOR WALLS.GENERAL CONTRACTOR
SHALL PROVIDE AND INSTALL 2'x4' LAY-IN CEILING SYSTEM AS INDICATED ON
REFLECTED CEILING PLAN. THEENTIRE PERIMETER MUST BE SILICONE CAULKED WHERE
GRID MEETS WALL.109EXISTING STRUCTURE COLUMN TO REMAIN.EXISTING QUARRY TILE
FLOORING IS TO REMAIN. CONTRACTOR NEEDS TO QUANTIFY "QUARRY TILE PATCHING
ON FLOOR ANDWALLS" DURING BID PHASE AND PROVIDE A COST PER SQUARE FOOT
ALLOWANCE.RE-GROUT EXISTING FLOOR TILE AND WALL BASE TILE EPOXY GROUT TO
ENSURE WATERTIGHT CONDITION.104103A103NOT USEDJAMB
TYPEJAMBFINISHHARDWAREJAMB FINISH DETAILDESCRIPTIONDOOR
SCHEDULEP-1STEEL1A1.0A13'-10"-0"x 7'-0"H.M. DOOR3 STANLEY HINGES: FBB179,
4-1/2"x4-1/2" NRP, 26D1 SCHLAGE LOCK, D80PD RHODES, 6261 NORTON CLOSER,
P8301BF SNB ALUM.1 KICK PLATE, 32"X12"1 STOP AS REQUIRED3 SILENCERS,1
THRESHOLD 'PEMKO' #2005 A'T', 1 SMOKEGASKETGRAY SEMIGLOSSEXISTINGU.L. LABEL
"B"GRAYSEMIGLOSSGRAY SEMIGLOAAA1.013" =1'-0"HEAD/JAMBHOLLOW METALTYPE ASEE
ELEVATIONS FORFINISHESEXISTING DEMISING WALLPAINT 1 3/4" H.M. DOOR.WALL
LEGEND2A1.11=A1.1=1EXISTING 3-5/8" METAL STUDS @ 16" O.C.WITH5/8" GYP. BD.
ON BOTH SIDES.TO REMAIN. CONTRACTOR TO VERIFY THECONDITION OF EXISTING
STUDS AND GYP. BD.=1A103103A100INSULATED WALK-IN COOLER WALLS.3NEW 3-5/8"
METAL STUDS @ 16"O.C.WITH 5/8" WATER RESISTANCE GYP.BD. ON BOTH
SIDESEXISTING DEMISING WALL, 6" METALSTUDS @ 16" O.C. BY LANDLORD,WITH 5/8"
TYPE 'X' GYP. BD. ONTENANT SIDE BY G.C.2RECESSEDPROVIDE ALL REQ'D.
HARDWARE0-10V DIMMING10%-100% DIMMINGA2X4 LED FLAT PANELLITHONIACPX 2X4
AL08 SWW7MLED (36W) 4000 LUMEN12036SURELITECC-2FURNISHED
W/UNITUNIVERSAL1205SYMBOLDESCRIPTIONMANUFAC.CATALOG LAMPMTG.
VOLTREMARKSWATTTOTAL EMEXEXIT LIGHTATLITEPNLRUFURNISHED
W/UNITUNIVERSAL12090 MINUTE BATT. BACKUP POWER590 MINUTE BATT. BACKUP
POWEREMERGENCY LIGHTTYPELIGHTING FIXTURE SCHEDULEIC22LED G4 14LM 3000K90CRI
120 ZT24 WWH TRIMBRECESSED DOWN LIGHTRECESSED12017.4 WATT
LED17.4JUNO10%-100% DIMMINGROOM FINISH SCHEDULESALES
AREAAREAFLOORBASEWALLSCEILINGCERAMIC TILESEALED CONC.N/AVINYL
BASEEXISTINGN/ACERAMIC TILEFRPTEMP. GLASSWALL COVERINGSTAINLESS
STEELN/AACOUSTICAL CLGGYP. BD. CLGPAINTSEE FINISH SCHEDULE, THIS SHEET, FOR
FINISHSPECIFICATIONSQUARRY TILE EXISTINGQUARRY TILE CERAMIC
TILEEXISTINGN/ALANDLORD NOTES:GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL
5/8" TYP. "X" GYP. BD. CEILING/SOFFITS AND PAINT PER REFLECTED CLG.
PLAN,SECTIONS, AND ELEVATIONS.NOTE:ALL LIGHT FIXTURES ABOVE THE
SERVICE,PREPARATION, UTENSIL WASHING AND FOODSTORAGE AREAS (INCLUDING THOSE
LIGHTSWITHIN STEAM TABLES, REFRIGERATION UNITS,HOODS, AND COOKING
EQUIPMENT) SHALL BESHIELDED OR EQUIPPED WITH SHATTER-PROOFBULBS.REFLECTED
CLG. PLANSCALE: 1/4" = 1'-0"STORAGE ROOMREFLECTED CLG. PLANSCALE: 1/4" =
1'-0"KITCHENSTORAGEEXISTING MALL BUILDING EXTERIORWALLS CMU WITH 2"
FURRING.2A==MARKNOT USEDPOPEYES STORAGEUNIT # 1280-D200 SQ. FT.

5.
TYP. WALL SECTION ATEXIST. DEMISING WALL SCALE: 3/4" =
1'-0"1A1.12A1.1100100PLAN VIEW2"2"2"16 GA.S/S ENDWALL CAP GUARD, SET IN
PLACE W/STR'L ADHESIVE & SILICONE ALLEDGES16 GA S/S ANGLE CORNERGUARD, SET
IN PLACE W/STR'L ADHESIVE & SILICONEALL EDGESNONBEARING WALL RATING - 1
HR.INTERIOR PARTITION AND BRACING DETAILSCALE: NONE4A1.112"6"QTB-1
BASEF.R.P. TO THICKNESS ASCEMENT BD. SAMECONT. 12" HIGHGYP. BD.GYP. BD.TOP
OF BASEKITCHENWATER RESISTANCESEE SALES AREAFINISHESSALESWATERPROOF
MEMBRANEBASEWATER PROOFMEMBRANE SHALL BELATICRETE 9325 OREPOXY OR
NEOGUARDMEMBRANE ORMER-KRETEHYDRO-GUARD 2000U.L. DESIGN NO. U465COOLER TRIM
DETAIL SCALE: 1 1/2" = 1'-0"3A1.1NOTE:TRIM AND SEAL COOLER TOWALL BOTH
VERTICALLY ANDHORIZONTALLY.1"N.T.S.5A1.1S.S. DETAILSBASE AS APPLICABLE6"3
5/8" X 20 GA. RUNNERTRACK (362T125-33) RAMSETAT 24" O.C. "HILTI" BRANDMODEL
X-DNI 32 P8ICC-ES REPORT #16633 5/8" x 20 GA. MTL.STUDS (362S162-33) @16"
O.C. TO STRUCTUREABOVE,(1CC ER-4943P)SALESKITCHEN AREA6"STAINLESS STL.
CLOSURE, 2" X 2".ADJACENT WALL CONSTRUCTIONSET INTO SEALANT AND FASTEN @12"
O.C. INSTALL FROM TOP OF BASETO TOP OF WALK-IN.A3A1A2SECTION A-11BSYSTEM
NO. W-L-1084F RATING — 1 HRT Rating — 0 Hr1. WALL ASSEMBLY — THE FIRE RATED
GYPSUM WALLBOARD/STUD WALL ASSEMBLY SHALL BE CONSTRUCTED OF THE MATERIALS
AND IN THE MANNER SPECIFIEDIN THE INDIVIDUAL U300 OR U400 SERIES WALL AND
PARTITION DESIGNS IN THE UL FIRE RESISTANCE DIRECTORY AND SHALL INCLUDE THE
FOLLOWINGCONSTRUCTION FEATURES:A. STUDS — WALL FRAMING MAY CONSIST OF
EITHER WOOD STUDS OR STEEL CHANNEL STUDS. WOOD STUDS TO CONSIST OF NOM 2 BY
4 IN. LUMBER SPACED 16 IN.OC. STEEL STUDS TO BE MIN 3-5/8 IN. WIDE AND
SPACED MAX 24 IN. OC.B. GYPSUM BOARD* — NOM 5/8 IN. THICK GYPSUM WALLBOARD,
AS SPECIFIED IN THE INDIVIDUAL WALL AND PARTITION DESIGN. DIAM OF OPENING
IS 1-1/2 IN.LARGER THAN THE OUTSIDE DIAM OF PIPE.2. THROUGH-PENETRANT — ONE
METALLIC PIPE, CONDUIT OR TUBING TO BE CENTERED WITHIN THE FIRESTOP SYSTEM.
AN ANNULAR SPACE OF 3/4 IN. IS REQUIREDWITHIN THE FIRESTOP SYSTEM. PIPE,
CONDUIT OR TUBING TO BE RIGIDLY SUPPORTED ON BOTH SIDES OF WALL ASSEMBLY.
THE FOLLOWING TYPES AND SIZES OFMETALLIC PIPES, CONDUITS OR TUBING MAY BE
USED:A. STEEL PIPE — NOM 12 IN. DIAM (OR SMALLER) SCHEDULE 10 (OR HEAVIER)
STEEL PIPE.B. CONDUIT — NOM 6 IN. DIAM (OR SMALLER) ELECTRICAL METALLIC
TUBING OR STEEL CONDUIT.C. COPPER TUBING — NOM 6 IN. DIAM (OR SMALLER) TYPE
L (OR HEAVIER) COPPER TUBING.D. COPPER PIPE — NOM 6 IN. DIAM (OR SMALLER)
REGULAR (OR HEAVIER) COPPER PIPE.3. FILL, VOID OR CAVITY MATERIAL* —
SEALANT — MIN 5/8 IN. THICKNESS OF FILL MATERIAL APPLIED WITHIN ANNULUS,
FLUSH WITH BOTH SURFACES OF WALLASSEMBLY.3M COMPANY — FB-2000+A CORNER
GUARDB WALL CAPC CORNER GUARDTile or StoneTile or StoneTYPICAL FOR FRONT
OFTHE HOUSEALUMINUM CORNER GUARDSIZE TO MATCHTILE
THICKNESSWWW.SCHLUTER.COMSCHLUTER - QUADEC TO TOPOF TILE1 HR INTEGRITY OF
DEMISING WALLMUST BE MAINTAINED, VERIFY INFIELD.JOINT TAPE & COMPOUND
VINYL, DRYOR PREMIXED JOINT COMPOUND,APPLIED IN TWO COATS TO JOINTS
ANDSCREW HEADS; PAPER TAPE, 2 IN.WIDE, EMBEDDED IN FIRST LAYER OFCOMPOUND
OVER ALL JOINTS. AS ANALTERNATE, NOMINAL 3/32 IN. THICKGYPSUM VENEER
PLASTER MAY BEAPPLIED TO THE ENTIRE SURFACE OFCLASSIFIED VENEER
BASEBOARD,JOINTS REINFORCED.EXISTING SLABEXISTING DECKEXISTING SEAL TO
DECKEXISTING FILL VOIDS WITH U.L.#HW-S-0009 (1-HR)EXISTING FLOOR & CEILING
RUNNER:20 MSG (MIN.) GALV. STEEL 1 IN.HIGH, RETURN LEGS 3-5/8 IN.
WIDE(MIN.) ATTACHED TO FLOOR ANDCEILING WITH FASTENERS 24 IN.O.C.GYPSUM
WALLBOARD: 5/8 IN.THICK, TYPE X, 4 FT. WIDE,ATTACHED TO STEEL STUDS
ANDFLOOR AND CEILING TRACK WITH 1IN. LONG, TYPE S SELF- TAPPINGSTEEL SCREWS
SPACED 8 IN. O.C.ALONG EDGES OF BOARD AND 12 IN.O.C. IN THE FIELD OF THE
BOARD.JOINTS ORIENTED VERTICALLY ANDSTAGGERED ON OPPOSITE SIDES OFTHE
ASSEMBLY. U.S. GYPSUMCO.-TYPE 'C' OR EQUAL.EXISTING STEEL STUDS: 3 5/8"
IN.WIDE (MIN.) 1-1/4 IN. LEGS, 3/8 IN.RETURN, FORMED OF 25 MSG (MIN.)GALV
STEEL MAX STUD SPACING 24 IN.O.C.EXIST.FLOOR & CEILING RUNNER: 20MSG (MIN.)
GALV. STEEL 1 IN. HIGH,RETURN LEGS 3-5/8 IN. WIDE (MIN.)ATTACHED TO FLOOR
AND CEILINGWITH FASTENERS 24 IN. O.C.QTB-1 BASE SALES ANDKITCHEN AREA,5/8"
F.C. TYPE GYP.BD. TO MIN. 6" ABOVEFIN CLG. ONSALES/KITCHEN SIDE5/8" F.C.
TYPE "X"GYP. BD. 6" ABV.SALES AREAFINISH CEILINGS.A.T. CLG. @SEE R.C.P.FIN.
FLOOR (SEEA-1 FOR TYPE)FACE OF WALL - SEEFLOOR PLANWALL OF
WALK-INFREEZERSCALE: N.T.S.TYPICAL FLOOR/WALLWATER PROOFING DETAIL THRU-OUT
SPACE.PROVIDE DOUBLE 3-5/8"X20 GA.DIAGONAL BRACING @ 48" O.C. W/3-#10
SCREWS EA. END.WALL BRACING ATTCHEMENT TOSTRUCTURE ABOVE.DIAGONAL BRACING
ATTCHEMENTTO STRUCTURE ABOVE.I. CLASS A: FLAME SPREAD 0-25; SMOKE-DEVELOPED
0-450II. CLASS B: FLAME SPREAD 26-75; SMOKE-DEVELOPED 0-450III.CLASS C:
FLAME SPREAD 76-200; SMOKE-DEVELOPED 0-450ALL FINISHES TO BE MIN. CLASS
"C".5.4.ALL MATERIALS USED FOR INTERIOR FINISHES AND TRIM SHALL BE
CLASSIFIED IN ACCORDANCE WITH ASTM E84.FINISHES NOTE:1. IT IS THE
CONTRACTORS RESPONSIBILITY TO FURNISH AND INSTALL ALL FINISHES.2. ALL ITEMS
SHOWN AS EXISTING ARE TO BE VERIFIED, PATCHED, AND REPAIRED BY G.C..3. SEE
CONSTRUCTION NOTES AND SPECIFICATIONS FOR GROUT INSTALLATION
PROCEDURES.12"12"ATTACH TO STRUCTURE ABOVE3-5/8" MTL STUDS BRACING12 GA.
HANGER WIREACOUSTICAL TILE CEILINGFRP FINISH TO MATCH KITCHENWALLSWALK-IN
FREEZER / COOLER6"5/8" TYPE 'X' GYP. BOARD16" O.C. MAX. - EXTEND TO20 GA
3-5/8" MTL. STUDS ATFIELD VERIFYCONTINUOUSSEALANT2"STRUCTURE AND CONNECT AS
REQUIREDNO SCALE6A1.1ABOVE COOLERENCLOSURE
DETAIL02.02.21CODECEILINGGB-1TILESGYPSUM BD.
CLG.SALESGC/USGINTERIORSSHEETROCK BLANDCLIMAPLUS VINYLPAINTED
P-124X48X1/2MATERIALLOCATIONSOURCEPRODUCTCOLORDIMENSIONADDITIONAL
INFORMATIONTL-4WALL TILEFRONT SERVICE WALLSMATERIALSCORPTHICKNESS: 6MM.
GROUT COLOR:ULTRACOLOR PLUS - RAIN
#1013"X12"popeyestile@creativematerialscorp.com1.800.207.2967 Ext
7797CREATIVEWHITE. FINISH: GLOSSY.CONTACT:QT-1QUARRY TILEBACK OF HOUSE
FLOORSCREATIVEMATERIALSCORPORATIONQUARRYGREY. FINISH:
SMOOTH6X6popeyestile@creativematerialscorp.com1.800.207.2967 Ext
7797CONTACT:QTB-1QUARRY TILE BASEBACK OF HOUSE
BASECREATIVEMATERIALSCORPORATIONE-1WALL FINISHES AND PAINTNICHIHA
FIBERCEMENTBR-1FACE BRICKDINING ROOM
ACCENTWALLSALTERNATEOPTION:CREATIVEMATERIALSCORPORATIONINTERIOR WALLS
ANDCEILING.MT-1WALL ADJACENT TO HOODBEADBOARD/BRICKWALLS
ANDSOFFITS/CEILINGP-2PAINTDOOR FRAMEBENJAMINMOOREULTRA SPEC 500
EGGSHELL2133-20 BLACK JACKCONTACT: RODGER LIPPMAN
C:848.702.0239rodger.lippman@benjaminmoore.comBENJAMINMOOREPRE-CATALYZED
WATERBORNEEPOXY - SEMI-GLOSS (V341)WHITE 01CONTACT: RODGER LIPPMAN
C:848.702.0239rodger.lippman@benjaminmoore.comVINTAGE BRICK AWP 1818WHITE
WASHFINISH PAINT P-1. OC-68 DISTANTGRAY7 3/8" x 2 1/2" x3/4"CONTACT: MATT
STEPHENSON M:770.789.8228 popeyes@nichiha.comALTERNATE: EPOXY FLOORING BACK
OF HOUSE FLOORS STONEHARDSTONSHIELD QUARTZBLEND #4INTEGRAL COVE BASE. STEEL
GRAY.QUARRYGREY. FINISH:
SMOOTH6X6popeyestile@creativematerialscorp.com1.800.207.2967 Ext
7797CONTACT:ALTERNATE OPTION: THINBRICK814 VINTAGE BRICK. FINISH PAINT
P-1.OC-68 DISTANT GRAY7-5/8” x
2-1/4”CONTACT:popeyestile@creativematerialscorp.com1.800.207.2967 Ext
7797SOLID SURFACESSS-1SOLID SURFACEFRONT SERVICECOUNTER TOPHI-MACSPROVIDED
BY G.C.FRPFRP SHEETKITCHEN WALLSLOCALSUPPLIERFRP SHEETP100 - WHITE. PEBBLE
FINISHCREATIVETL-1BASE TILEWALL BASEMATERIALSCORPBUSINESS - SLATE 2.0COLOR:
MATTE GROUT COLOR:ULTRACOLOR PLUS - IRON
#1076X24.THICKNESS:10.5mmCONTACT:popeyestile@creativematerialscorp.com1.800.207.2967
Ext 7797(CLASS C, FLAME SPREAD=<200, SMOKEDEVELOPED=450)(CLASS C, FLAME
SPREAD=<200, SMOKEDEVELOPED=450)(CLASS A, FLAME SPREAD=<20,
SMOKEDEVELOPED=5)INTERIOR MATERIALS & FINISH SCHEDULEWD-2WOOD LOOK WALL
TILESALES AREA SIDE WALLCREATIVEMATERIALSCORPMOTIVATE, WALNUTCOLOR: MATTE
GROUT COLOR:TO MATCH TILE COLOR8X40THICKNESS:9
mmCONTACT:popeyestile@creativematerialscorp.com1.800.207.2967 Ext 7797OMNI,
WHITE ICE GLOSSYINSTALL AS REQUIRED G554 URBAN CONCRETEP-1PAINTSTAINLESS
STEEL PANELSMARLITESCP-1GYPSUM LAY-INKITCHENGC/USGINTERIORS5/8" TYPE 'X',
SMOOTH FINISH,PAINTED PER REFLECTED CEILINGPLAN3270 WHITE. FINISH:
SMOOTH40" MAX.48" MAX.48" MAX.34" .29" .27" .SOAP DISP.QTB-1PLUMBING
ACCESS. SCHEDULESEE EQUIPMENT PLAN FORBLOCK'G. PERDETAIL
THISSHEET.F.R.P.SINK WITH LEVERHANDLE FAUCETTOWEL DISP.OPERABLE PART OF
SOAP DISPENSER AND PAPERTOWEL DISPENSER SHALL NOT BE LOCATED MORE
THAN40”A.F.F. PER CBC 11B-603.5. SINK DEPTH SHALL NOTEXCEED 6.5”PROVIDE
SECOND TIER OF SHELVINGWHERE CLG. SPACE ALLOWS.CEILING. PER REFLECTED
CEILINGPLAN.METAL SHELVING PER EQUIPMENTPLAN.BLOCK'G. PER DETAIL THIS
SHEET.6'-6"QTB-1SEE EQUIP. PLANF.R.P.F.F.AREA OF BLOCK'G.SHOWN
HATCHED.EXTEND BEYOND MIN.OF 6"FIXTURE OREQUIPMENT.SECTION5/8"
WATERRESISTANCE GYP. BD.INSTALL FINISH PERELEVATIONS ANDNOTES.3/4"3/4" FIRE
RATED PLY-WOODBLOCKING FLUSH TO BACKSIDE OF GYP.BD.3 5/8" M.S.HORIZONTAL
BLOCKINGSUPPORT; 2 1/2" 16 GAMETAL STUDS BETWEENWALL STUDS.AS REQUIRED2
7/8"AS REQUIREDEXISTING.F.R.T. PLYWOOD(SHEET BLOCKING)SECURED TO
WALLSTUDS.5/8" TYP. "X"GYP. BD. ATDEMISING WALLS(EXIST.)F.R.P.DEMISING
WALLSTUDS.5/8" WATERRESISTANCEGYP. BD.902 GOODRICH AVENUE,S A R A S O T A ,
F L 3 4 2 3 6T E L . 8 1 3 . 3 3 3 . 2 7 1 7WEST COUNTY CENTER89 WEST
COUNTY CENTER DRIVE, SPACE FC14DES PERES, MISSOURI 63131TYP. ELEV .AT HAND
SINK NO SCALETYP. BLOCKING DETAIL SCALE: AS NOTEDSECTION: NON DEMISING
WALLSCALE: AS NOTEDSECTION DEMISING ANDEXISTING INTERIOR WALLSSCALE: AS
NOTED A1.1NOTE:ALL NEW WALL BOARD TO BEWATER AND MOLD RESISTANTTYPICAL
SHELVING ELEVATION SCALE: 1/4" = 1'-0"A1.193" =1'-0"BLOCKING DETAILSFINISH
SCHEDULE AND DETAILSLANDLORD NOTES:

6.
24"x36"4TIERS4TIERS24"x60"24"x60"4TIERS24"x60"4TIERS4TIERS24"x60"4TIERS24"x60"4TIERS24"x60"3'-0"3'-1
1/2"3'-3 1/2"3'-4 1/2"3'-3"EXISTINGMANAGERTERMINALEXISTING EXISTING
ELECTRICALSTORAGE ROOMEXISTINGEXISTINGG.T.EXISTINGTRANSFORMER902 GOODRICH
AVENUE,S A R A S O T A , F L 3 4 2 3 6T E L . 8 1 3 . 3 3 3 . 2 7 1 7WEST
COUNTY CENTER89 WEST COUNTY CENTER DRIVE, SPACE FC14DES PERES, MISSOURI
63131A2.0EQUIPMENT PLANWALK-IN COOLER/FREEZER SPECIFICATIONS:CONTRACTOR
SHALL INSTALL NEW WALK-IN COOLER/FREEZER TO HAVE THE
FOLLOWINGSPECIFICATIONS:UNIT WALLS. FOAM PLASTIC INSTALLED IN A MAXIMUM
THICKNESS OF 10 INCHES (254 MM) INUNIT WALLS SHALL:1. HAVE A FLAME SPREAD
INDEX OF 25 OR LESS AND A SMOKE-DEVELOPED INDEX OF NOT MORETHAN 450, WHERE
TESTED IN A MINIMUM 4 INCH (102 MM) THICKNESS.2. HAVE FLASH IGNITION AND
SELF-IGNITION TEMPERATURES OF NOT LESS THAN 6000F AND8000F (3160C AND
4270C), RESPECTIVELY.3. HAVE A COVERING OF NOT LESS THAN 0.032-INCH (0.8
MM) ALUMINUM ORCORROSION-RESISTANT STEEL HAVING A BASE METAL THICKNESS NOT
LESS THAN 0.0160 INCH(0.4 MM) AT ANY POINT.4. BE PROTECTED BY AN AUTOMATIC
SPRINKLER SYSTEM. WHERE THE COOLER IS WITHIN ABUILDING, BOTH THE COOLER AND
THAT PART OF THE BUILDING IN WHICH IT IS LOCATED SHALLBE SPRINKLERED.
PROVIDE DRY TYPE SPRINKLER HEADS IN COOLERCLASS ABC FIRE EXTINGUISHER:
EXTINGUISHERS SHALL BE CONSPICUOUSLYLOCATED AND READILY ACCESSIBLE. THE TOP
OF THE EXTINGUISHER SHALLNOT BE MORE THAN 5 FT. ABOVE THE FLOOR AND THE
BOTTOM OF THEEXTINGUISHER SHALL NOT BE LESS THAN 4 INCHES ABOVE THE
FLOOR.EXTINGUISHERS SHALL BE INSTALLED IN ACCORDANCE WITH
CLASSIFICATION,RATING, AND DISTRIBUTION REQUIREMENTS OF NFPA 10. [NFPA 1:
13.6.1.2]2CLASS K FIRE EXTINGUISHER:CLASS K FIRE EXTINGUISHERS SHALL BE
PROVIDED FOR HAZARDS WHERETHERE IS A POTENTIAL FOR FIRES INVOLVING
COMBUSTIBLE COOKING MEDIA.[NFPA 10:4.3.2]FIRE EXTINGUSHER NOTESEQUIPMENT
NOTES:GENERAL CONTRACTOR IS REQUIRED TO PROVIDE ALL LABOR ANDEQUIPMENT
NECESSARY TO RECEIVE AND OFFLOAD ALL EQUIPMENT ORDELIVERIES ON BEHALF OF
THE OWNER. ALL EQUIPMENT ANDDELIVERIES SHOULD BE INSPECTED FOR VISUAL
DAMAGE PRIOR TOREMOVING FROM DELIVERY TRUCK. DAMAGED ITEMS NEED TO
BEPROPERLY DOCUMENTED AND PHOTOGRAPHED. ANY DAMAGED ORMISSING EQUIPMENT
SHOULD BE NOTED ON SHIPMENT RECEIPT PRIOR TOTRANSPORT REPRESENTATIVE
VACATING THE SITE, FORWARDED TOOWNER SAME DAY. ALL EQUIPMENT AND DELIVERIES
NEED TO BETRANSPORTED AND STORED IN SPACE OR A PREDETERMINED
STORAGELOCATION APPROVED BY THE OWNER. GENERAL CONTRACTOR WILLSUPPLY ALL
LABOR AND EQUIPMENT NECESSARY TO UNCRATE ANDPLACE ALL ACCORDINGLY. DEBRIS
WILL BE REMOVED AND DISPOSED OFBY GENERAL CONTRACTOR. ALL ITEMS AND
EQUIPMENT IS TO BEPROTECTED FROM ANY CONSTRUCTION ACTIVITIES AND OR WORKERS
ATALL TIMES.1WINSTONRTV5-05UV23.7 7.222083 X1D81.1CHUBB WARMER, ELEC.
RETHERMALIZER0.251.501 D90.1HOLDING CABINET, REACH-INWINSTONHA450719.4
2.331201 X3 G61.48SHELVING, 2 TIER, UNDERCOUNTER W/ 34" POSTS,
18"X48"INTERMETROSUPER ERECTA1 G40.60DUNNAGE RACK, 24" WIDE X 60"
LONGKELMAX1 G30.30SHELVING, 2 TIER WALL MOUNTED, 36"
LONGINTERMETROMETROSEALINTERMETRO6GT.360STORAGE SHELVING, 4TIER, 24" WIDE,
60" LONGINTERMETRO2-MQ2604G/2-MHP2460G-MX76P2 GT.336STORAGE SHELVING,
4TIER, 24" WIDE, 36"
LONGINTERMETRO2-MQ2436G/2-MHP2436G-MX76PCHANNEL2G50.00SHELVING,
WIREMETRO1436NK3 8POP1GT.1860STORAGE SHELVING, 4TIER, 18" WIDE, 60"
LONGINTERMETRO2-MQ1860G/2-MHP1860G-MX76P2 G40.48DUNNAGE RACK, 24" WIDE X
48"
LONGKELMAXCHANNELMODELQTY.TAGDESCRIPTIONMANUFACTURERPHASEDIRECTPLUGELECTRICALGASCOLDHOTDIRECTINDIRECTSIZEWATERWASTEMBTUH1
Q30 SIGN LOGOPOPEYES APPROVE SIGN CO.IL-12115 1 X1 Q12 PRE-SELL MENUBOARD,
DIGITAL 1 PANELSICOMCUSTOM115 11 Q11 MENUBOARD, DIGITAL 3
PANELSSICOMCUSTOM115 1QSIGNAGE3 P30 PRINTERP.O.S. SYSTEM115 1 X3 P20 CASH
REGISTERP.O.S. SYSTEM115 1 X3 P10 CASH DRAWERP.O.S. SYSTEMPPOINT OF SALE2
N63 FLOUR BIN, SANDWICH1 N61 RICE BINRUBBERMAIDFG360288-WHT1 N60 FLOUR
BINRUBBERMAIDFG360288-WHT1 N50 FIRE PROTECTION SYSTEMANSULR-1022 N40 FIRE
EXTINGUISHERANSUL2 ABC/1K3 N10 HAND SINK, W/ HAND FREE LEVERADVANCED
TABCO7-PS-23-EC-SP0.50 0.50 1.50NMISCELLANEOUS1 M30 SAFENKL INDUSTRIESBSD
292020 ABAX5.0 0.6115 1 X1 M21 SMARTRACK WALL-MOUNT RACK ENCLOSURE
CABINETSTRIPP-LITESRW26US1 M11 WORK TABLE, W/ 4" BACKSPLASH W/O U/S, 30"
HEIGHTKITCHEN EQUIP. SUPPLIERCUSTOM120 1 XMOFFICE2 K40 CO2 TANK,
BULKAIRGAS1 K30 SODA DISPENSER, 12 HEADS, DROP-IN, FAST FLOW
VALVESLANCERBEVARIETY-121.5115 1 X .3750.751 K20 WATER FILTER,
EQUIPMENTECOLABTO14 AND TO14S0.751 K15 ICE BIN, 570 LBSMANITOWOCB-5700.751
K10 ICE CUBER W/ REMOTE CONDENSERMANITOWOCIY-996N/JC-099511.9 6.7 1 1/2 208
1 X.3750.5KDRINKS2 J51CUP DISPENSER BRACKET, 2 SAN JAMAR 2410C DISPENSERS
EACHKITCHEN EQUIP. SUPPLIERCUSTOM1 J41REFRIGERATOR, UNDERCOUNTER1201 X3
J20CASH CONTROLLERNKL INDUSTRIESW-1011 J10FRONT SERVICE
COUNTERG.C.CUSTOMJFRONT SERVICE1 H12 PRODUCTION COUNTER, EZ OVER,
5-20"KITCHEN EQUIP. SUPPLIERCUSTOM1 X 0.502.001 H12.1 BIRD CAGE, EZ OVER,
5-20" (PRINCE CASTLE)KITCHEN EQUIP. SUPPLIERCUSTOM1 XGSHELVING1 F11EXHAUST
HOOD, FRYER, EZ OVER, 5-20"HALTONGL-L15.0/5.8120 1 XFVENTILATION1 E30.68
CHICKEN CRATE VAT, 68 LONGKITCHEN EQUIP. SUPPLIERCCV-681 E20RACK, BUS
PANKELMAXAPR 1818-3/65ED1 E10.2KOLPAKCUSTOM208 3 X1 E10.1 WALK-IN
COOLERKOLPAK208 3 XEWALK-IN1D94DEDICATED HOLDING UNIT, 12 PANS(4X3H)PRINCE
CASTLEX1D92SIDE ITEMS HOLDING UNIT, PASS-THRUPRINCE CASTLEX2 D70 DISPENSER,
HOT WATER W/WALL BRACKET1 D40KITCHEN EQUIP. SUPPLIER0.50 0.50 2.001 D22
SHELF, MICROWAVE OVENKITCHEN EQUIP. SUPPLIERMOS-2126 CUSTOM2 D20 MICROWAVE
OVENAMANA14.3 1.7208 1 X1 D11.60 WORK TABLE, W/ 4" BACKSPLASH W/ U/SKITCHEN
EQUIP. SUPPLIERCUSTOMDPREP1 C21 TOASTER, VERTICAL CONTACTROUNDUPVCT-215.00
1.80120 1 X1 C18 REFRIGERATOR, UNDERCOUNTER1 C17 SANDWICH PRODUCT HOLDING
UNITPRINCE CASTLEEHBP2312.00 1.40120 1 X1 C16 BUN STORAGE, WORK
TABLEKITCHEN EQUIP. SUPPLIERCUSTOM1 C15 NON-REFRIGERATED, SANDWICH UNIT
W/OVERSHELF, WRAP HOLDERKITCHEN EQUIP. SUPPLIERCUSTOM1.00CSANDWICH1 B11
OVEN, 1/2 SIZE, SINGLE DECK CONVECTION,
ELEC.BBAKINGBREADER/BLENDER/SIFTERARYKINGBBS-U-L29341.60 0.18115 1 X0.501
A37.R SINK, 1 COMPARTMENT, RIGHT HAND DRAIN BOARD, 36"KITCHEN EQUIP.
SUPPLIERCUSTOM0.50 0.50 2.001 A31 MARINATOR - (REDUCED
HEIGHT)WINHOLTM101-1205.01151 XAFRYER2 A47.2A1 N70 MOP & BROOM
HANGERADVANCEDK2422 N20GENERAL CONTRACTORCUSTOM0.50 0.50 3.002 M40
LOCKERSKELMAXEL SERIES 4K00901A54FREEZER, UPRIGHT1 A47.4 ICE BATTER/SIFTER
TABLE, 4 PANSKITCHEN EQUIP. SUPPLIERCUSTOM2.3 0.31151 X0.501 D30.1 CUPPING
STATION KITCHEN EQUIP. SUPPLIERCUSTOM0.500.501 C22PHOENIX PLK HOLDING BIN
4-SHELF PROTEIN PHUPRINCE CASTLEPHB41F1-PLK0112.001.00120 1X1A60PROTEIN
RAIL AYR KING PSR581410CAMBROIB321 K42L BAG-N-BOX RACK /W 2 CARBONATORS ON
SHELVES (LEGACY)MCCANN'S2-IC44239 15-2902(28X16X74)7.21/3 115 1 X2 K72 TEA
DISPENSER, URN, SOLID LIDBUNN-O-MATICTDO-4 (34100.0000)1 K71 BREWER, TEA &
COFFEEBUNN-O-MATICITCB14.0 1.7120 1 X 0.251 K73 FROZEN LEMONADE
DISPENSERBUNN-O-MATICULTRA-2 HP (34000.0081)12.0 1.44120 1
XHPRODUCTION5.81.22081X1A55REACH-IN EVEN-THAW REFRIGERATOR/
SELF-CONTAINEDTRAULSEN CSI SECTION 1140012.01151 X4.220 2.412020813.36
2.78208111 A10.308.501/4 120 1 X1 A10.20FRYER, GAS, MULTIPLE
BATTERY1"210.0FRYER, GAS, MULTIPLE BATTERY315.02FQG120T8.501/4 120 1
XFRYMASTERCUSTOMCUSTOM1 B30.48D REFRIGERATOR, WORK TOP, 48" LONG W/BISCUIT
RACKSTWR-48SD-N4.01/5 115 1
X18"18"18"18"18"18"18"64"42"60"24"18"60"18"48"24"PHB34R2 8POPPHB21N2
8POP23.75.7DUKE59-E3P24 81/2208X115 1 XM3F24-1-N4.484"48"3(3)X(1)X120/2081
G30.36SHELVING, 2 TIER WALL MOUNTED, 36" LONGINTERMETROMETROSEAL1/2WALK-IN
FREEZERFL-AMPSKWHPVOLTSCONN.HT1201 X4.218"FRYMASTER3FQG120T1"MOP
SINKEQUIPMENT PLANSCALE: 1/4" = 1'-0"2HDC182BUNNH5XELH&K54029H&K54029TURBO
AIRTURBO AIRSTORAGE ROOM PLANSCALE: 1/4" = 1'-0"1SINK, 3
COMPARTMENTEXISTINGEXISTINGEXISTING

7.
1A4.03A4.0SS-1TL-1SS-1SS-14A3.03A3.02'-10"12'-4"BASEBY G.C, INSTALLEDBY
G.C.12'-10"4'-0"7'-0"WOOD PLANKS BYBMC, INSTALLEDBY G.C."POPEYES"
STOREFRONT SIGN.SHOP DRAWING TO BE SUBMITTEDTO LANDLORD FOR APPROVAL BYSIGN
CONTRACTOR.12'-4"EXISTING LANDLORDNEUTRAL PIER WITHFINISHES TO REMAIN.16'-5
1/8"EQ.4'-1 3/8"4'-1 3/8"4'-1 3/8"2'-0
7/16"DATADUPLEXDATADUPLEXDATADUPLEXDATADUPLEX2'-0 9/16"48.63" x
27.87"48.63" x 27.87"48.63" x 27.87"48.63" x
27.87"CLEQ.CLCLCLCLQTB-1TL-4REFER TO EQUIPMENTPLAN FOR EQUIPMENT INTHIS
AREA4A3.06A3.0 WALL MOUNTED DIGITALMENU BOARDS5A3.0REFER TO EQUIPMENTPLAN
FOR EQUIPMENT INTHIS AREATL-4TL-42'-10' A.F.F.COUNTER HEIGHT7'-0'
A.F.F.MENU BOARDS SOFFIT12'-4" A.F.F.GYP. BD. CLG.A3.05A4.03WALL
MOUNTEDDIGITAL MENUBOARDSEXISTING MALLCEILINGTL-4OPENREFER TO EQUIPMENTPLAN
FOR EQUIPMENT INTHIS AREAQTB-14'-0""POPEYES" STOREFRONT SIGN.SHOP DRAWING
TO BE SUBMITTEDTO LANDLORD FOR APPROVAL BYSIGN CONTRACTOR.3-5/8" MTL. STUDS
16"O.C. MENU BOARDSOFFIT. ATTACHED TOSTRUCTURE ABOVE3-5/8" MTL.
STUDSDIAGONAL BRACING48" O.C. . ATTACHEDTO STRUCTUREABOVE3A3.0STOREFRONT
SECTIONSCALE: 3/8" = 1'-0"1A3.0STOREFRONT ELEVATION SCALE: 3/8" =
1'-0"2A3.0STOREFRONT ELEVATION SCALE: 3/8" =
1'-0"QTB-1MT-1QTB-110'-0"2'-10' A.F.F.COUNTER HEIGHT7'-0' A.F.F.MENU BOARDS
SOFFIT12'-4" A.F.F.GYP. BD. CLG.TL-4A3.05A4.03EXHAUST HOOD ANDDUCTWORK,
REFER TOMECHANICAL PLANS.3-5/8" MTL. STUDS 16"O.C. MENU BOARDSOFFIT.
ATTACHED TOSTRUCTURE ABOVEWALL MOUNTEDDIGITAL MENUBOARDSOPEN
TOADJACENTTENANT3-5/8" MTL. STUDS DIAGONALBRACING 48" O.C. . ATTACHED
TOSTRUCTURE ABOVE"POPEYES" STOREFRONT SIGN.SHOP DRAWING TO BE SUBMITTEDTO
LANDLORD FOR APPROVAL BYSIGN CONTRACTOR.EXISTING MALLCEILINGREFER TO
EQUIPMENTPLAN FOR EQUIPMENT INTHIS AREATL-44A3.0STOREFRONT SECTIONSCALE:
3/8" = 1'-0"EXISTING NEUTRAL PIERSTAINLESS STEEL END CAPTO REMAIN.MENU
BOARD DETAILSCALE: 1-1/2" = 1'-0"2'-0"R.T.P5A3.07'-0" A.F.F.SOFFITCENTER
LINE OF HORIZONTALLY PLACEDELECTRICAL BOXES, MUD RING & LOWVOLTAGE BOXES
LOCATED ABOVE MENUBOARD UNISTRUT CHANNEL.UNISTRUT CHANNEL BY OTHERSMENU
BOARD BRACKET BY OTHERSCLFIRE RATED PLYWOOD BLOCKING BY GC6" METAL STUDS
BOXED BEAM12'-4"7'-0"A3.0STOREFRONTELEVATIONS ANDSECTIONS902 GOODRICH
AVENUE,S A R A S O T A , F L 3 4 2 3 6T E L . 8 1 3 . 3 3 3 . 2 7 1 7WEST
COUNTY CENTER89 WEST COUNTY CENTER DRIVE, SPACE FC14DES PERES, MISSOURI
63131

8.
3"6"2'-1"2'-10"OVER (2) LAYERS 3/4" PLYWOOD3'-0"3/4" PLYWOOD SECURED TOMTL.
STUDSSS-1QT-1FRP3"6"2'-1"2'-10"OVER (2) LAYERS 3/4" PLYWOODSS-1FLOOR SINK
W/ HALFGRILL, BEYONDAIR GAP BETWEENCONDENSATE LINE ANDFLOOR SINKVERIFY
EQUIP. OPNG. W/MANUF. PRIOR TOFABRICATIONFRP3'-0"3"SS-1QT-1QTB-1FRPCOUNTER
TOP CASHREGISTER. SEE EQUIP.PLAN AND SCHEDULE.3"6"2'-1"2'-10"FRP3'-0"S/S
ANGLEL.L. FLOORING3-5/8" METAL STUDS @1'-0" O.C.WOOD
PLANKS3"SS-1QT-1QTB-13"3/4" PLYWOOD SECURED TOMTL. STUDS6"S/S ANGLEL.L.
FLOORING3-5/8" METAL STUDS @1'-0" O.C.WOOD PLANKSSS-1S/S ANGLEL.L.
FLOORINGLEASE LINE.3/4" PLYWOOD SECURED TOMTL. STUDSQTB-1FRPLL COMMENT:
TGCTO REWORK LANDLORDTILE AS REQUIRED.BASE PER ELEVATIONSBASE PER
ELEVATIONS1-5/8" ∅ STAINLESS STEELLEG & HARDWARWEFURNISHED AND INSTALLEDBY
G.C. OVER 3/4" PLYWOODFURNISHED AND INSTALLEDBY GENERAL
CONTRACTORSS-1SS-12"2"2"WOOD PLANKSFURNISHED AND INSTALLEDBY G.C. OVER 3/4"
PLYWOODFURNISHED AND INSTALLEDBY G.C. OVER 3/4" PLYWOODOVER (2) LAYERS 3/4"
PLYWOODFRPOWNER PROVIDED ANDINSTALLED CASH DRAWER.1-5/8" ∅ STAINLESS
STEELLEG & HARDWARWEFURNISHED AND INSTALLEDBY GENERAL CONTRACTOR1-5/8" ∅
STAINLESS STEELLEG & HARDWARWEFURNISHED AND INSTALLEDBY GENERAL
CONTRACTORBASE PER ELEVATIONSLL COMMENT: TGCTO REWORK LANDLORDTILE AS
REQUIRED.LL COMMENT: TGCTO REWORK LANDLORDTILE AS REQUIRED.3-5/8" METAL
STUDS @1'-0" O.C.LEASE LINE.LEASE LINE.3'-0"POS 1POS 02'-4"2'-6"1'-10
1/2"8"5"3"1' 11-1/4"2'-4"3'-8"2'-8"3'-4"2'-7"POS 23 1/2"LOW WALL BELOWLEASE
LINEcash drawer23'-6""MANAGER'STERMINAL"STAINLESSSTEEL LEGSTYPICALcash
drawer2" HOLE2" HOLE4'-11"1' 11-1/4"CLCL22'-11"2"
HOLE2'-8"1'-7"1'-7"CLCLCLSALES AREAMALL COMMON
AREA4'-11"3'-0"2'-9"5'-9"94°902 GOODRICH AVENUE,S A R A S O T A , F L 3 4 2
3 6T E L . 8 1 3 . 3 3 3 . 2 7 1 7WEST COUNTY CENTER89 WEST COUNTY CENTER
DRIVE, SPACE FC14DES PERES, MISSOURI 63131A4.0SALES COUNTERSECTIONS
ANDDETAILSSCALE: 1-1/2" = 1'-0"1COUNTER SECTION AT SODA MACHINEA4.02COUNTER
SECTION AT POSA4.0SCALE: 1/2" = 1'-0"4SALES COUNTER PLANA4.0GC TO PROVIDE
AND INSTALL WOOD BLOCKING FLUSHWITH ANY COUNTERTOP EDGE TO PREVENT
CASHDRAWERS FROM NOT OPENING.BOTTOM ANCHORS / FASTENERS OF
COUNTERTOPSUPPORT LEGS TO BE STAINLESS STEEL.CLEAR SILICONE AT INTERSECTION
- TYPICAL FOR ALLCABINETS AND OR EQUIPMENT THROUGHOUT SPACE ¾” PLYWOOD
SUBSTRATE IS ALSO ON BOTH SIDES OFCOUNTERTOP KNEE WALL.COUNTER
NOTES3COUNTER SECTION AT PICK UPA4.01A4.02A4.03A4.0

9.
902 GOODRICH AVENUE,S A R A S O T A , F L 3 4 2 3 6T E L . 8 1 3 . 3 3 3 .
2 7 1 7WEST COUNTY CENTER89 WEST COUNTY CENTER DRIVE, SPACE FC14DES PERES,
MISSOURI 63131AS1.0ARCHITECTURESPECIFICATIONSEXISTING QUARRY TILE FLOOR
FINISH QT-1, CONTRACTOR SHALL VERIFY THE CONDITION OF EXISTING FLOORING
AND, IF REQUIRED,CONTRACTOR SHALL PRESSURE WASH, REGROUT, AND RESTORE THE
EXISTING FLOORING TO A LIKE NEW CONDITION.LAYOUT. ALL VERTICAL DIMENSIONS
OR SPECIAL LOCATE NOTES I.E. (ABOVE CEILING) TO BE NOTED ON EQUIPMENT ALL
ELECTRICAL, MECHANICAL & PLUMBING - FLOOR & CEILING ROUGH-IN TO BE LOCATED
& TAGGED ON THIS ALL WORK TO BE SCHEDULED THROUGH THE TENANT COORDINATOR SO
THAT IT DOES NOT INTERFERE WITH MALLTENANT'S GENERAL CONTRACTOR SHALL
OBTAIN COPY OF "TENANT/LANDLORD RESPONSIBILITIES" SECTION OF MAKE GOOD ANY
DAMAGE TO LANDLORD'S OR OTHER TENANT'S WORK CAUSED DURING CONSTRUCTION.ALL
WORK BY THE TENANT'S CONTRACTOR(S) SHALL BE COMPLETED USING NEW
MATERIALS.SCHEDULE & ROUGH-IN SPECS. ON THIS DRAWING.THE LEASE, AND CONFORM
AS REQUIRED.REMOVE ALL GARBAGE AND DEBRIS TO THE APPROVED CONTAINERS,
DAILY.24.OPERATIONS.23.20.22.21.19.18.CONTRACTOR UNLESS INDICATED
OTHERWISE.ALL MATERIALS TO MEET FLAME SPREAD RATINGS REQUIREMENTS OF
AUTHORITIES HAVING JURISDICTION.START OF WORK. ALL WORK MUST CONFORM TO THE
APPLICABLE LOCAL AND NATIONAL CODES.BUILDING CODES ARE SUBJECT TO CHANGE &
SHOULD BE VERIFIED WITH THE GOVERNING AUTHORITIES BEFORE ONE SET OF
LANDLORD APPROVED DRAWINGS TO BE KEPT ON SITE AND AVAILABLE FOR CHECKING AT
ALL TIMESUNLESS OTHERWISE NOTED, ALL WORK TO BE THE RESPONSIBILITY OF THE
TENANT'S GENERAL CONTRACTOR.SOME SPECIFIED ITEMS (SUCH AS FLUORESCENT
FIXTURES IN SALES COUNTER, WALL STANDARDS, SHELVINGWITH A SOLUTION OF 50%
VINEGAR AND 50% WATER. SET REFRIGERATOR TO OPERATE AT 34 - 38 RANGE.PRIOR
TO INSTALLING SHELVING IN REFRIGERATOR, T.G.C. TO WASH DOWN (SPONGE)
INTERIOR THREE (3) TIMESCAPACITY AND RATING AS REQUIRED BY N.F.P.A.
PAMPHLET #10 AND LOCAL AUTHORITIES. LOCATE PER LOCALCONTRACTOR FOR A
MINIMUM OF ONE YEAR FROM THE DATE OF FINAL ACCEPTANCE. EXCEPT FOR
MANUFACTURE'S ALL MATERIALS SHALL BE NEW AND FIRST CLASS. ALL WORK AND
EQUIPMENT ITEMS SHALL BE WARRANTIED BY THE11.MISCELLANEOUSMAINTAIN
INTEGRITY OF EXISTING FIRE RATED ASSEMBLIES AT ALL TIMES.BRACKETS, CERAMIC
TILE, ETC.) MAY REQUIRE LONG DELIVERY.17.15.16.DRING CONSTRUCTION.14.13. WL
5001 WL 2005 WL 1003 WL 2004 WL 1002 WL 2003WL 1001 WL 2002ALL FIRE-WALL
PENETRATIONS TO BE INSTALLED PER U.L. NUMBERSNO COMBUSTIBLE MATERIALS ARE
PERMITTED ABOVE CEILING. WL 5002 AUTHORITIES AND N.F.P.A. 10.10.FIRE
WALLSFIRE EXTINGUISHERSCOMBUSTIBLE MATERIALSWARRANTY WHICH MAY BE
LONGER.9.8.7.MATERIALSALL MATERIALS AND EQUIPMENT ITEMS SUPPLIED BY THE
OWNER/TENANT ARE TO BE INSTALLED BY GENERALAPPROVAL OF THESE DRAWINGS BY
GOVERNING AUTHORITIES DOES NOT RELEASE THE CONTRACTOR FROM COMPLYINGALL
WORK, MATERIALS AND CONSTRUCTION METHODS SHALL CONFIRM WITH ALL GOVERNING
AUTHORITIES HAVINGALL NOTES ON ANY PORTION OF THESE DOCUMENTS APPLY TO
ENTIRE DOCUMENT WHETHER OR NOT THEY AREPRIOR TO THE COMMENCEMENT OF ANY
WORK. FAILURE BY THE CONTRACTOR TO IDENTIFY DISCREPANCIES OR ANY
DISCREPANCIES OR OMISSIONS ON THESE DOCUMENTS MUST BE BROUGHT TO THE
ATTENTION OF THE ARCHITECTCONSTRUCTION. COSTS DUE TO A FAILURE OF REPORTING
THESE DISCREPANCIES WILL BE THE RESPONSIBILITYRESPONSIBLE FOR SAME. ANY
DISCREPANCIES SHALL BE REPORTED TO THE ARCHITECT PRIOR TO THE START OFALL
DIMENSIONS AND CONDITIONS OF THIS JOB SHALL BE FIELD CHECKED BY GENERAL
CONTRACTOR WHO WILL BEWITH ALL APPLICABLE CODES AND STANDARDS.INSTALLATION
BY GENERAL CONTRACTORAPPROVAL BY GOVERNING AUTHORITIESWORK, MATERIALS AND
CONSTRUCTION METHODSOMISSIONS WILL THEN BECOME THE RESPONSIBILITY OF THE
CONTRACTOR.JURISDICTION.6.5.4.REPEATED IN OTHER AREAS.3.NOTESGENERAL
NOTESCHECK DIMENSIONS AND CONDITIONS IN THE FIELDERRORS AND OMISSIONSOF THE
GENERAL CONTRACTOR.2.1.1.CO-ORDINATE ALL SECTIONS OF THE WORK. ANY WORK
REQUIRED BY CONTRACTDOCUMENTS OR REASONABLY NECESSARY TO COMPLETE THE WORK
BUT NOTINCLUDED IN ANY SPECIFIC SECTION OF THE SPECIFICATIONS IS
HEREBYPRODUCTS SPECIFIED IN CERTAIN SECTIONS OF THE SPECIFICATIONS,
E.G.SPECIALITIES, EQUIPMENT, ETC., MAY OR MAY NOT REQUIRE INSTALLATIONBY
THE SUPPLIER. ALLOCATE THE INSTALLATION OF ITEMS NOT INSTALLEDLAY OUT
PARTITIONS, DOORS AND BUILT-IN MILLWORK OR METALWORK. NOTIFYTHE ARCHITECT
OR PROJECT MANAGER SHOULD ANY PROBLEM ARISE BECAUSEOF SITE CONDTIONS OR
OTHER CAUSES. OBTAIN ARCHITECT'S OR PROJECTMANAGER'S APPROVAL FOR ANY
DEVIATION FROM THE CONTRACT DOCUMENTS.WHERE CONCRETE FLOORS, WHICH ARE TO
RECEIVE ADHERED FLOOR FINISHES,ARE CONTAMINATED WITH GREASE OR OIL, OBTAIN
AND FOLLOW FLOORINGPROTECT TROWELLED CONCRETE FLOORS ADEQUATELY, AND
FINISHED FLOORINGFROM DAMAGE. TAKE SPECIAL MEASURES WHEN MOVING HEAVY
EQUIPMENTKEEP FLOORS AS DRY AS POSSIBLE. KEEP FLOORS FREE FROM OILS,
GREASE,OR OTHER MATERIALS LIKELY TO DAMAGE, DISCOLOUR OR AFFECT THE
BONDAVOID "SHORT CIRCUITING" SOUND ATTENTUATING PARTITIONS BY THE
CAREFULLOCATION AND TREATMENT OF DUCTS, GRILLES, DIFFUSERS, ELECTRICAL
OUTLETSAND BOXES, ETC. WHERE ELECTRICAL BOXES ARE BACK TO BACK, LOCATETHEM
AT LEAST 10" APART AND USE FLEXIBLE CONNECTIONS IF INTER-MAKE ALLOWANCE AT
WALL AND PARTITION HEADS FOR DEFLECTION OF THEOF STRUCTURAL MEMBERS IN THE
ORDER OF SPAN/180 BECAUSE OF LIVELOAD ONLY. WHERE PARTITIONS ABUT THE
UNDERSIDE OF THE FLOOR, THECLEARANCE SHALL BE BASED ON THE SPAN OF THE
MEMBERS SUPPORTINGTHE FLOOR. USE METHODS WHICH MAINTAIN THE INTEGRITY OF
THE WALLCONSTRUCT AND MAINTAIN SCAFFOLDING IN A RIGID, SECURE AND
SAFEMANNER. REMOVE SCAFFOLDING PROMPTLY WHEN NO LONGER REQUIRED.ERECT
SCAFFOLDING INDEPENDENT OF PARTITIONS AND COLUMNS. USE SCAFFOLDINGSO AS TO
INTERFERE AS LITTLE AS POSSIBLE WITH OTHER CONTRACTORS ANDSUBCONTRACTORS.
WHEN NOT IN USE MOVE SCAFFOLDING AS NECESSARY TOGLASS CUTTING ON SITE IS
PROHIBITED EXCEPT WITH PROJECT MANAGER'SPERMISSION AFTER REVIEWING THE
CONTRACTOR'S PROPOSED METHODS.WHETHER NOTED IN THE DOCUMENTATION OR NOT,
THE CONTRACTOR(S) SHALLPROECT ALL WORK AND EXISTING ADJACENT PUBLIC AND
PRIVATE PROPERTY,AND WORK OF THERE SECTIONS FROM DAMAGE WHILE PERFORMING
WORK.PROVIDE HOARDING WHEN REQUIRED BY LANDLORD, OWNER OR THE CODES.DAMAGED
WORK SHALL BE MADE GOOD WHEREVER POSSIBLE BY THOSEPERFORMING THE ORIGINAL
WORK, BUT AT THE EXPENSE OF THOSE CAUSINGATTACH AND FASTEN FITTINGS AND
FIXTURES IN SAFE, STURDY AND SECURE MANNER SO THAT THEY CANNOT WORK LOOSE,
FALL OR SHIFT FROM POSITIONDURING OCCUPANCY OF BUILDING, AS A RESULT OF
VIBRATION OR OTHERPROTECT FINISHES AGAINST HEAT, SLAG AND WELD SPLATTERS BY
ERECTINGPROMPTLY REMOVE FROM FINISHED SURFACES ALL PRODUCTS WHICH
COULDHARDEN OR SET OR BECOME DIFFICULT TO REMOVE. CLEAN FINISHED SUR-FACES
UPON COMPLETION OF WORK OF YOUR SECTIONS OR WHEN REQUIREDDAILY, OR MORE
OFTEN IF REQUIRED, REMOVE OILY RAGS AND WASTE ANDOTHER COMBUSTIBLE DEBRIS
FROM PREMISES, AND FROM SITE AT LEAST ONCEIMMEDIATELY PRIOR TO OCCUPANCY BY
OWNER, CLEAN, DUST, AND REMOVEALL STAINS, SMUDGES, TAPE, PENCIL MARKS,
ETC., FROM ALL FINISHEDSURFACES, EXPOSED FIXTURES, HARDWARE AND EQUIPMENT.
CLEAN BOTHSIDES OF WINDOWS OR OTHER GLAZING. TURN WORK OVER IN NEW
CONDITION.CUT, PATCH AND MAKE GOOD TO LEAVE WORK IN A FINISHED
CONDITIONWHERE NEW WORK ABUTS EXISTING AND WHERE EXISTING WORK IS
ALTERED.STRUCTURES ABOVE. IF NO OTHER INSTRUCTIONS ARE GIVEN, ALLOW
DEFLECTIONSTURDY PLYWOOD OR OTHER HEAVY SHIELD DURING SUCH WORK.OR
PARTITION AS A SOUND BARRIER IN MAKING SUCH ALLOWANCES.STORE AND LOCATE
PRODUCTS AND EQUIPMENT PACKED IN COMBUSTIBLE CON-TAINERS IN ORDERLY AND
ACCESSIBLE AMNNER. UNTIL PERMANENT FIREPROTECTION AND EQUIPMENT IS
AVAILABLE, PLACE APPROVED TYPES OF FIREPERMISSION OF THE LANDLORD MUST BE
OBTAINED TO WORK AT TIMES OTHER.THE CUTTING, PATCHING WORK MAY FALL UNDER,
EMPLOY PERSONS QUALIFIED IN THE WORK BEING CUT AND PATCHED TO DO SUCH WORK
IN ORDER THAT ITWHERE EXISTING ITEMS ARE DESIGNATED FOR RELCATION OR
REMOVAL, DOALL REQUIRED CONSTRUCTION, ALTERATION AND MAKING GOOD TO SUCH
ITEMS.MAKE GOOD BOTH NEW AND EXISTING DAMAGE. REMOVE FROM SITE ALLITEMS NOT
REQUIRED TO BE TURNED OVER TO LANDLORD NOR TO BE RELOCATEDOR REUSED. CAP
ALL EXISTING SERVICES REQUIRED TO BE SEVERED.PROVIDE VACUUM WATER REMOVER
ON THE FLOOR NEAR THE WORK FORIMMEDIATE REMOVAL OF SPILLED OR LEAKED WATER
BEFORE IT CAN PENETRATEPROVIDE A TELEPHONE ON SITE FOR GENERAL USE DURING
CONSTRUCTION.LONG DISTANCE CHARGES ARE TO BE PAID TO THE GENERAL
CONTRACTORPROVIDE TEMPORARY ELECTRICAL SERVICE FOR LIGHTING AND THE
OPERATIONOF PUMPS, MOTORS AND OTHER POWER TOOLS DURING CONSTRUCTION.PROVIDE
TEMPORARY HEATING, MAINTAINED AT LEAST AT 13 C DURING CONSTRUCTION.PROVIDE
AND MAINTAIN, IN COMPLIANCE WITH LOCAL BY-LAWS AND LABORAGREEMENTS,
SANITARY TEMPORARY TOILETS AND WASHBASINS FOR USE OFTAKE NECESSARY
PRECAUTIONS TO ELIMINATE FIRE HAZARDS AND TO PREVENTDAMAGE TO WORK,
MATERIALS, EQUIPMENT AND OTHER PROPERTY, BOTH PUB-PERMIT USE OF TEMPORARY
FACILITIES BY OTHER CONTRACTORS.REGARDLESS OF WHICH SECTION OF THE
SPECIFICATIONS ANY PORTION OFAPPLICATION OF WORK OR ANY PART OF IT SHALL BE
DEEMED ACCEPTANCE OFALL WARRANTIES ARE TO BE DELIVERED TO THE CLIENT UPON
SUBSTANTIALCOMPLETION OF THE WORK. INCLUDE IN THIS COMPILATION ALL
MAINTEN-ANCE INSTRUCTIONS FOR FLOOR, WALL AND CEILING SURFACE AND
OPERATINGEQUIPMENT. ALSO INCLUDE ALL FIRE RATING CERTIFICATES OF
COMPLIANCEAND MAINTENANCE INSTRUCTIONS FOR ALL MECHANICAL AND ELECTRICALON
CONSTRUCTION MATERIALS.FIGHTING EQUIPMENT IN
VICINITY.3.15.3.15.1.SECURITYTHAT WORK UPON WHICH THE CONTRACTORS' WORK OR
THAT PART OF IT WHICHDRAWINGS ARE INTENDED TO CONVEY SCOPE OF THE GENERAL
CONTRACT WORKREVIEW APPROVED PROGRESS SCHEDULE FOR QUICK AND EFFICIENT
COMPLETIONOTHER THAN EXCEPTIONS IN PREVIOUS PARAGRAPH, RELOCATE TRADEMARKS
ANDLABELS TO CONCEALED OR INCONSPICUOUS SURFACES, OR REMOVE BY GRINDINGKEEP
THE ARCHITECT INFORMED OF PROGRESS, DELAYS AND POTENTIAL DELAYSDURING ALL
STAGES OF THE WORK.FINISH HARDWARE WARRANTY, OPERATING AND MAINTENANCE
DOCUMENTATIONEXCEPT FOR UL LABELS AND/OR OTHER SIMILAR AUTHORITIES, AND
EXCEPTWHERE NECESSARY TO IDENTIFY ELECTRICAL AND MECHANICAL EQUIPMENT,THE
FOLLOWING IS A LIST OF EXTENDED WARRANTIES THAT EXTEND BEYONDTHE TWELVE
MONTHS AS REQUIRED UNDER THE GENERAL CONDITIONS OF THE CONTRACT.THIS LIST
IS FOR CONVENIENCE ONLY AND MAY BE INCOMPLETE. ANY WARRANTIES FOR PRODUCT
SUPPLIED FOR THE WORK BUT NOT NOTED, AREWARRANTIES IN THE SPECIFICATIONS OR
OTHER CONTRACT DOCUMENTS ORTRADEMARKS AND LABELS SHALL NOT BE VISIBLE IN
THE FINISHED WORKFOR MAINTENANCE AND REPLACEMENT, AND EXCEPT WHERE
SPECIFIED.IF NECESSARY OR PAINT OUT TO MATCH WHERE ADJOINING SURFACE
ISAPPLICABLE AND IN FORCE WHETHER LISTED HERE OR NOT.CARPENTRY AND MILLWORK
DESCRIPTION EXTENSION OF WARRANTY2.9.2.2.9.1.TRADEMARKS AND
LABELS2.9.EXTENDED WARRANTIES2.8.2.PAINTED.2.8.2.8.1.AND INDICATE GENERAL
AND APPROXIMATE LOCATIONS, ARRANGEMENTS, ANDOBTAIN MORE ACCURATE
INFORMATION FROM STUDY AND CO-ORDINATION OFAND ELECTRICAL, AND BECOME
FAMILIAR WITH CONDITIONS AND SPACE AFFECTINGTHESE MATTERS BEFORE BEGINNING
OR PROCEEDING WITH THE WORK.SIZE OF FIXTURES, EQUIPMENT, DUCTS, PIPING,
CONDUIT, AND OUTLETS.DRAWINGS, AND SHOP DRAWINGS, INCLUDING ARCHITECTURAL,
MECHANICALWHERE JOB CONDITIONS REQUIRE REASONABLE CHANGES IN
INDICATEDLOCATION AND ARRANGEMENTS, MAKE AT NO EXTRA COST TO OWNER.SHOP
DRAWINGS AND SUBMITTALWHERE SHOP DRAWINGS ARE REQUESTED, THE CONTRACTOR
SHALL SUBMIT ONESEPIA AND THREE WHITEPRINTS TO THE ARCHITECT OR PROJECT
MANAGER FORAPPROVAL. COPIES OF THE FINAL SHOP DRAWINGS ARE TO BE PROVIDED
TOHOLD SITE MEETINGS AS REQUIRED THROUGH THE DURATION OF THE WORK.OF THE
WORK, ACCORDING TO CONTRACT REQUIREMENTS, WITH SUPPLIERS OF THE ARCHITECT
AND TO BE KEPT ON SITE FOR REFERENCE.CO-ORDINATE ALL WORK WITH RESPECTIVE
TRADE CONTRACTORS.SITE MEETINGSPRODUCTS AND
SUBCONTRACTORS.2.7.2.7.1.2.7.2.2.7.3.2.6.2.6.1.HAS BEEN APPLIED
DEPENDS.2.5.4.TEMPORARY FACILITIESALL WORKERS ON THE SITE.FIRE
PROTECTIONLIC AND PRIVATE.BY PERSON(S) MAKING THE
CALL(S).3.14.3.13.5.3.14.1.3.14.2.3.13.3.13.2.3.13.3.3.13.4.3.13.1.ALTERATIONS
AND REPAIRSWATER REMOVALTO THE SPACE BELOW THE FLOOR.BE DONE CORRECTLY AND
SKILLFULLY.3.11.3.3.12.3.12.1.3.10.3.3.11.3.11.1.3.11.2.3.5.1.2.1.4.THE USE
OF SCOPE, RELATED WORK OR SIMILAR ARTICLES IN THE SPECIFICATIONSVARIOUS
PARTS OF THE WORK TO THE APPROPRIATE SUBCONTRACTORS, AND FORCES,AND SHALL
NOT IMPOSE UPON THE ARCHITECT OR THE OWNER THE DUTY TOARBITRATE DISPUTES
BETWEEN THE CONTRACTOR AND SUBCONTRACTORS, NOR SHALL ITRELIEVE THE
SUBCONTRACTORS FROM THEIR RESPONSIBILITY FOR CAREFULLY EXAMININGALL THE
SPECIFICATIONS AND DRAWINGS, AND CO-ORDINATING THEIR WORK WITHCO-OPERATE
AND CO-ORDINATE WITH OTHE CONTRACTORS AND SUBCONTRACTORSTAKE SITE
DIMENSIONS RELATIVE TO THE WORK. FABRICATE AND ERECT WORKTHE OWNER OR THE
ARCHITECT AND THEIR EMPLOYEES OR AGENTS SHALL HAVENOMINAL PARTITION AND
COLUMN THICKNESSES ARE SHOWN ON THE DRAWINGS.SHALL NOT RELEVE THE
CONTRACTOR FROM THEIR RESPONSIBILITY TO ASSIGN THE2.3.1.REPORT ALL
DISCREPANCIES TO THE ARCHITECT OR PROJECT MANAGER.THEM AMONG THE TRADES
CONCERNED.DETERMINE ACTUAL SIZES ON SITE.UNDERSTANDS THESE DOCUMENTS.BEFORE
DOING SHOP DRAWINGS AND FABRICATIONS.KEEP ON COPY OF ALL DOCUMENTATION ON
SITE AT ALL TIMES, COMPLETEBEFORE ANY CONSTRUCTION OR FABRICATION BEGINS,
EXAMINE THE SITE ANDDETERMINE THE EXTENT AND NATURE OF ALL CONDITIONS
AFFECTING THE PER-SERVICES WHICH MAY HAVE TO BE PROTECTED, REMOVED OR
RELOCATED.ALL SPECIFICATIONS, SCHEDULES, DRAWINGS AND OTHER DOCUMENTATION.
BYEACH TRADE SHALL EXAMINE THE WORK UPON WHICH THEIR WORK DEPENDS.ACCEPTING
THIS WORK, IT IS ASSUMED THAT THE CONTRACTOR THOROUGHLYWITH LANDLORD AND
LOCAL AUTHORITIES APPROVAL.EXAMINATION OF SITE AND DOCUMENTATIONFORMANCE OF
THE WORK, INCLUDING THE LOCATION OF ALL CONCEALEDBEFORE ANY CONSTRUCTION OR
FABRICATION BEGINS, EXAMINE CAREFULLYWHERE DIMENSIONS ARE NOT AVAILABLE
BEFORE FABRICATION, AGREE UPONTHE LOCATION OF PLUMBING, HEATING, ELECTRICAL
FIXTURES AND OUTLETS,DUCTS, CONDUIT AND PIPE SHOWN OR SPECIFIED BUT NOT
DIMENSIONED AREVERIFY DIMENSIONS FOR SHOP FABRICATED PORTIONS OF THE WORK
ON SITE 2.5.2.2.5.3.2.5.2.5.1.APPROXIMATE.DRAWINGS ON
SITE2.3.4.2.4.2.4.1.2.3.5.2.3.2.2.3.3.REQUIRED FOR SATISFACTORY AND
EXPEDITIOUS COMPLETION OF THE WORK.TO SUIT SITE DIMENSIONS AND CONDITIONS.
PROVIDE FORMS, TEMPLATES,ANCHORS, SLEEVES, INSERTS AND ACCESSORIES REQUIRED
TO BE FIXED TO ORINSERTED IN THE WORK AND SET IN PLACE, OR INSTRUCT RELATED
SUBCON-COST OF EXTRA WORK CAUSED BY AND MAKE UP TIME LOST AS RESULT
OFFAILURE TO PROVIDE NECESSARY CO-OPERATION, INFORMATION OR ITEMS TOTHE
RIGHT TO ENTER THE PREMISES AND INSPECT THE SITE, MATERIALS ANDEACH OTHER
AND THE GENERAL CONTRACTOR.BE FIXED OR BUILT-IN WITHIN ADEQUATE
TIME.TRACTORS AS TO THEIR LOCATION, GIVING REQUIRED SUPERVISION.
PAYDIMENSIONSWORKMANSHIP AT ANY TIME.2.3.2.2.2.2.2.CO-OPERATION2.2.1.3.9.
PROTECTION AND MAKING GOODCAUSES OF NORMAL USE.CLEANING AND COMPLETIONBY
GENERAL CONTRACTORS.3.10.3.9.4.3.10.2.3.10.1A WEEK.3.9.1.3.9.2.3.9.3.THE
DAMAGE.PERMIT OTHER WORK.MAINTAIN ACCESS TO BASE BUILDING SYSTEMS AS
REQUIRED.3.7.1.3.8.1.3.8.3.7.OPENINGSGLASS
WORK3.6.1.3.6.SCAFFOLDINGSECTIONS OF WORK, WHETHER OR NOT THE PROJECT WAS
AWARDED BY TENDERWHERE THE WORK IS TO BE PERFORMED, AND TO THE LATEST
VERSION OFOBTAIN ALL PERMITS, CERTIFICATES AND AUTHORIZATIONS REQUIRED BY
AUTHORITIES.ORDERLY MANNER AND TO PROVIDE MINIMUM INTERFERENCE. RUN PIPE,
DUCTS,TUBING AND CONDUIT SQUARE WITH BUILDING GRID, VERTICALLY AND
HORIZONTALLYUNLESS OTHERWISE NOTED. CONCEAL PIPES, DUCTS, TUBING AND
CONDUIT INADA (AMERICANS WITH DISABILITIES ACT).THE CONTRACTOR SHALL
PERFORM THE WORK AS SHOWN IN THE DRAWINGS,IN THE EVENT OF CONFUSING
INFORMATION, THE CONTRACTOR US TO IMMEDIATELYFOR A LIST OF WORK INCLUDED
UNDER SEPARATE CONTRACTS, SEE ATTACHED.CONFORM TO THE LATEST EDITION OF THE
BUILDING CODE HAVING JURISDICTIONCONSERVE AS MUCH AS POSSIBLE OVERHEAD
SPACE BY INSTALLING AND ARRANGING DUCTS, PIPING, TUBING, CONDUIT, EQUIPMENT
AND FIXTURES IN ANCO-ORDINATE WITH SEPARATE CONTRACTORS.CONTACT THE
ARCHITECT FOR CLARIFICATION.SCHEDULES, SPECIFICATIONS AND ADDENDA ISSUED
HEREWITH.FOR A LIST OF EXISTING OR NEW ITEMS PROVIDED BY THE OWNER,
SEE2.1.GENERAL INSTRUCTIONSPUBLIC
AREAS.2.1.3.2.1.1.2.1.2.1.2.5.1.2.6.ATTACHED.1.2.2.1.2.3.1.2.4.THE WORD
ARCHITECT MEANS LICENSED ARCHITECT.THE WORD OWNER MEANS: UNLESS SPECIFIED
OTHERWISE, THE FOLLOWING INSTRUCTIONS APPLY TO ALLSEE SHEET C-1 FOR OWNER
INFORMATIONWORK INCLUDEDTHE WORD LANDLORDTHE WORD CONTRACTOR MEANS LICENSED
CONTRACTOR AWARDED CONTRACTPROCESS.DEFINITIONSFLOOR SURFACESOR LOADS ON
THEM.OF APPLIED FINISHES.PREPARATION OF SURFACESMANUFACTURER'S INSTRUCTIONS
PRIOR TO INSTALLING FLOORING.SOUND ATTENTUATING
PARTITIONS3.3.2.3.4.1.3.5.3.4.CONNECTED.DEFLECTION3.2.1.3.3.1.3.3.3.2BY THE
SUPPLIER.INCLUDED IN THIS SECTION.GENERAL WORK3.0.2.3.1.1.3.1SETTING
OUT3.0.1.3.0.ARCHITECTURAL SPECIFICATIONS1.11.1.11.1.21.1.31.1.41.21.2.1.OR
ACCEPTABLE COMPLETION OF THE WORK & SHALL NOTIFY THE GENERAL CONTRACTOR OF
UNACCEPTABLESUBCONTRACTORS MUST EXAMINE EACH INSTALLATION AREA FOR
CONDITIONS INTERFERING WITH PROPER, TIMELY,CONDITION REQUIRING ATTENTION
BEFORE FINISH MATERIAL INSTALLATION.26.25.ASSUMPTION OF RESPONSIBILITY FOR
COMPLIANCE WITH MATERIAL INSTALLATION QUALITY STANDARDS.PERFORMANCE OF THIS
WORK BY THE INSTALLER INDICATES ACCEPTANCE OF ALL SUBSTRATE CONDITIONS &
MANNER ACCEPTABLE TO THE GENERAL CONTRACTOR & ARCHITECT FOR THAT PORTION OF
THE WORK.DO NOT BEGIN FINISH MATERTIAL INSTALLATION BEFORE UNACCEPTABLE
CONDITIONS HAVE BEEN CORRECTED IN A 28.27.CARRY OUT DEMOLITION WITHIN THE
PREMISES TO A BROOM SWEPT CONDITION, OF ANY EXISTING EQUIPMENT,CEILING AND
PARTITIONS NOT REQUIRED BY THE TENANT, INCLUDING THE REMOVAL AND CAPPING OF
WATER ANDGAS LINES, AND THE REMOVAL OF CIRCUIT WIRING BACK TO THE BREAKER
PANEL.SUPPLY AND INSTALL CONSTRUCTION BARRICADE TO THE PREMISES, THREE FEET
BEYOND LEASE LINE. REMOVE ATCONCLUSION OF CONSTRUCTION.SUPPLY TEMPORARY
FACILITIES OF A MINIMUM 100 AMP HYDRO SERVICE, READILY ACCESSIBLE WATER
SUPPLY,AND GARBAGE DISPOSAL TO THE TENANTS G.C. FOR THE DURATION OF THE
CONSTRUCTION PERIOD.ALLOW ACCESS BY TENANTS G.C. TO LOADING FACILITIES
AND/OR FREIGHT ELEVATOR IF APPLICABLE, DURINGREGULAR MALL HOURS.1 YEAR1
YEARFOR THIS PROJECT BY OWNER.12.29.30.31.ALL HORIZONTAL EQUIPMENT DRAINS
TO BE KEPT A MINIMUM OF 6" A.F.F. TO FACILITATE MOPPING.32.CALLING FOR ALL
OPEN JOINTS TO BE CAULKED.SCOPE OF WORKSEE SHEET C-1 FOR LANDLORD
INFORMATIONGENERAL: A. CONTRACTOR SHALL INCLUDE IN HIS COST ALL HIS
EQUIPMENT AND MATERIALS INCLUDING HANDLING SHIPPING AND RECEIVING.
CONTRACTOR WILL TAKE FULL RESPONSIBILITY FOR ALL ITEMS. B. CONTRACTOR SHALL
INCLUDE IN HIS COST ALL HANDLING AND RECEIVING OF OWNER'S EQUIPMENT AND
MATERIALS. C. CONTRACTOR SHALL BE RESPONSIBLE TO PROVIDE SECURE STORAGE AS
REQUIRED FOR OWNER'S EQUIPMENT AND INCLUDE COSTS IN HIS WORK. D. REMOVE ALL
DEBRIS MATERIALS AND EQUIPMENT FOR FINAL CLEAN UP OF THE ENTIRE STORE. E.
CONSTRUCT AS PER FINAL APPROVED STAMPED "CONSTRUCTION" DRAWINGS AND STAMPED
"PERMIT" SET OF DRAWINGS. F. IT IS CONTRACTOR'S RESPONSIBILITY TO VERIFY
THE CORRECTNESS OF THE DRAWING BEFORE STARTING CONSTRUCTION, AND TO NOTIFY
THE OWNER IN WRITING IF THERE ARE ANY ISSUES OR ERRORS WITHIN 3
DAYS.PERMITS: A. CONTRACTOR WILL BE RESPONSIBLE FOR PICK-UP OF BUILDING
PERMITS. B. CONTRACTOR WILL BE RESPONSIBLE FOR ELECTRICAL, PLUMBING,
SPRINKLER AND ALL OTHER PERMITS REQUIRED BY ALL SUB TRADES. C. CONTRACTOR
TO ATTEND AND SCHEDULE ALL INSPECTIONS AND TO ENSURE ALL WORK MEETS WITH
ALL LOCAL AND ANY OTHER APPLICABLE CODES AND REGULATIONS. D. CONTRACTOR TO
OBTAIN ALL FINAL INSPECTIONS APPROVALS AND OBTAIN THE CERTIFICATE OF
OCCUPANCY.FINISHES: A. TO SUPPLY AND INSTALL ALL SURFACES FINISHES AS PER
FINAL APPROVED DRAWINGS. B. TO SUPPLY AND INSTALL ALL DOORS AS PER FINAL
APPROVED DRAWINGS.EQUIPMENT AND FIXTURES AND GRAPHICS: A. INSTALL AND
CONNECT ALL EQUIPMENT, FIXTURES AND GRAPHICS SUPPLIED BY OWNER AS PER FINAL
APPROVED DRAWING.SIGNS: A. CONTRACTOR TO COORDINATE AND CONTRACT SIGN
INSTALLATION WITH OWNER APPROVED SIGN CONTRACTOR. B. CONTRACTOR WILL ENSURE
ALL ELECTRICAL WORK TO BE AVAILABLE FOR THIS INSTALLATION.FLOORING:PLUMBING
& GAS:ELECTRICAL:A.HVAC:HOOD, EXHAUST SYSTEMS, ANSUL FIRE SYSTEMS AND
MAKE-UP AIR:SPRINKLERS:FIRE ALARM: A. SUPPLY AND INSTALL ALL DUCTWORK AND
RELATED WORK (i.e. DUCT SHAFT, FIRE WRAP) TO INSTALL C. COORDINATE ANSUL
SYSTEM INSTALLATION WITH THE OWNER'S APPOINTED CONTRACTOR. D. SCHEDULE AND
ATTEND ALL HOOD AND ANSUL INSPECTIONS. B. INSTALL EXHAUST HOODS, FANS AND
MAKE-UP AIR UNIT AS SUPPLIED BY THE OWNER, INCLUDINGAPPLICABLE ROOF TOP
CODE REQUIRED CLEARANCE TO ADJACENT TENANT INTAKE & EXHAUSTS.CONTRACTOR
SHALL ENAGE A QUALIFIED INDEPENDENT TESTING COMPANY TO PERFORM SMOKE TEST
OF ALL DUCTWORK, AND TO PERFORM AIRTESTING AND BALANCING OF THE AIR SYSTEM,
INCLUDING EXHAUST MAKE-UP AIR AND AIR CONDITIONING SYSTEMS. CONTRACTOR
SHALL PROVIDESEPARATELY A CERTIFIED REPORT OF THE SMOKE TEST, AND A
CERTIFIED REPORT OF THE AIR TESTING AND BALANCING REPORT. THE REPORTS MUST
BECERTIFIED BY A QUALIFIED INDEPENDENT PROFESSIONAL. THE CONTRACTOR SHALL
SUBMIT THE TESTING REPORTS TO THE OWNER WITHIN THREE DAYSAFTER THE TESTING.
THE REPORT MUST BE RECEIVED BY THE OWNER PRIOR TO DISBURSEMENT OF ANY
HOLDBACK AMOUNT.THE EXHAUST SYSTEMS AND MUA SYSTEMS AS PER CONTRACT
DOCUMENTS AND LOCAL AUTHORITIES.E. A. SUPPLY AND INSTALL ALL HVAC AS
REQUIRED PER FINAL APPROVED DRAWINGS INCLUDING ALL MATERIALS AND EQUIPMENT.
A. SUPPLY AND INSTALL SPRINKLERS IN ACCORDANCE WITH THE CONTRACT DOCUMENTS.
B. WHERE APPLICABLE, EXISTING SPRINKLER PIPING SHALL BE ADJUSTED TO SUIT
NEW HEAD LOCATIONS. ALL EXISTING PIPING THAT DOES NOT MEET CODE
REQUIREMENTS SHALL BE REMOVED AND REPLACED, AS REQUIRED. C. THE SYSTEM
INSTALLATION IS TO BE CARRIED OUT BY A QUALIFIED SPRINKLER COMPANY APPROVED
BY LANDLORD. D. APPLY FOR, OBTAIN AND PAY FOR ALL PERMITS, LICENSES,
WORKING DOCUMENTS REVIEWS, INSPECTIONS AND EXAMINATIONS. E. THE CONTRACTOR
SHALL COORDINATE INSTALLATION WITH ALL TRADES AT SITE. F. THE CONTRACTOR
SHALL COORDINATE WITH THE MALL ADMINISTRATION FOR DRAIN TIME AND REFILL OF
SPRINKLER SYSTEM AND PAY FOR ANYFEES AS REQUIRED.BY LANDLORD APPROVED
CONTRACTOR AT TENANT'S EXPENSE. A. COMPLY W/ LANDLORD'S FIRE ALARM
REQUIREMENTS, INSTALLATION & CONNECTION TO LL. SYSTEM. A. SUPPLY AND
INSTALL ALL PLUMBING AND GAS, INCLUDING METER PLACEMENT IF APPLICABLE, AS
REQUIRED PER FINAL APPROVED DRAWINGS INCLUDING ALL MATERIALS AND
EQUIPMENT.SUPPLY AND INSTALL ALL ELECTRICAL, INCLUDING METER IF APPLICABLE,
AS REQUIRED PER FINAL APPROVED DRAWINGS INCLUDING ALL MATERIALSAND
EQUIPMENT.LANDLORD NOTES

10.
24"x36"4TIERS4TIERS24"x60"24"x60"4TIERS24"x60"4TIERS4TIERS24"x60"4TIERS24"x60"4TIERS24"x60"24"x36"4TIERS4TIERS24"x60"24"x60"4TIERS24"x60"4TIERS4TIERS24"x60"4TIERS24"x60"4TIERS24"x60"E1.0ELECT.
POWER &LIGHTING PLANS, &RISER DIAG.TIMER CONTROL FOR SIGN AND LIGHTSSCALE:
N.T.S.TA-1SPARETO LIGHTINGELECTRICALLY HELDCONTACTOR (TYP.)CINTERIOR
LIGHTING CONTROLSTHE TIME CLOCK CAN BE INTERMATIC ET 7000
SERIES.MANUALOVERRIDESWITCH "TR"TIME CLOCK "TC"365 DAYS
ASTRONOMICALPROGRAMMABLEA-7THE TIME CLOCK SHALL PROVIDE 365 DAYS, ADVANCE
HOLIDAY,ASTRONOMICAL PROGRAMMABLE SHUT OFF SWITCH AND 0-2 HOURS
MAXIMUMOVERRIDE SWITCHSPARETHE TIME CLOCK SHALL HAVE BATTERY BACKUP 78
HOURS MIN.#KEYNOTES:1. PROVIDE LOCK TAB AT CIRCUITS WHICH FEED POWER TO
EXIT, NIGHT AND EMERG. LIGHTS IN "ON"POSITION. NIGHT, EXIT AND EMERGENCY
LIGHTS SHALL BE WIRED AHEAD OF ANY LOCAL SWITCHES.2. CONTRACTOR MUST
COORDINATE AND SUBMIT CUT SHEETS OF ALL NEW LIGHT FIXTURES AND MUSTGET
APPROVAL FROM THE OWNER OF ALL LIGHT FIXTURE MODEL NUMBERS BEFORE
PURCHASINGANY NEW LIGHT FIXTURES.3. CONTRACTOR SHALL PROVIDE A NEW TIME
CLOCK (T/C). INSTALL JUNCTION BOXES, RECESSEDOUTLETS AND SWITCHES STORE
SIGN CIRCUITS AS REQUIRED.4. ROUTE ALL LIGHTING/SIGN CIRCUITS THROUGH A
WATTSTOPPER 8 RELAY PEANUT PANELLP8S-8-G-115 AND PROVIDE AS-100-W SWITCHES
FOR ALL LIGHTING SWITCHES. (FOR TIME OF DAYCONTROL AND LOCAL OVERRIDE )5.
INSTALL NEW SWITCH LEG AS SHOWN. EACH SWITCH DESIGNATION WHICH CONTROL THE
SPECIFICLIGHT IS MARKED ON THE PLAN.6. CONTRACTOR SHALL COORDINATE WITH
OWNER AND ROUTE POWER SUPPLY TO THE BIRDCAGE,ITEM #H12.1 FROM JUNCTION BOX
IN THE CEILING TO THE PRE-WIRED JUNCTION BOX AT THE TOP OFTHE BIRD CAGE,
REFER TO EQUIPMENT SPEC. SHEETS FOR DETAILS.7.PROVIDE A MINIMUM 1/2"
CONDUIT W/WIRE FROM TELEPHONE OUTLET BACK TO TELEPHONE BOARDLOCATED IN WORK
AREA. THIS IS TYPICAL FOR ALL TELEPHONE OUTLETS.8. CONTRACTOR SHALL
COORDINATE WITH LANDLORD AND INSTALL NEW TELEPHONE BOARD ASREQUIRED. EXTEND
EXISTING TELEPHONE CONDUIT AND CABLE TO TENANT'S TEL. BD "TTB".COORDINATE
ALL LOW VOLTAGE REQUIREMENTS WITH TENANT. CONTRACTOR SHALL BERESPONSIBLE
FOR PROVIDING ALL CABLES AND DATA/TEL. OUTLETS. THE LOW VOLTAGE SYSTEMSHALL
BE COMPLETE AND FUNCTIONAL.9. ALL OUTLETS WITHIN 6' OF ANY SINK SHALL BE
GFI OUTLETS. ALL KITCHEN AREA OUTLETS SHALL BEWITH GFI TO COMPLY WITH
N.E.C. STD. #210.8(B)(2). TO ECONOMIZE THE COST THE CONTRACTORSHALL INSTALL
FIRST OUTLET AT WHICH THE HOME RUN IS CONNECTED, WITH GFI AND ALL OTHERDOWN
STREAM OUTLET NORMAL WITHOUT GFI.10. THE CONTRACTOR SHALL COORDINATE WITH
LANDLORD AND DETERMINE WHAT KIND OF LIFESAFETY AND FIRE ALARM DEVICES ARE
REQUIRED BEFORE BIDDING FOR THE PROJECT. USE EXISTINGOR FURNISH AND INSTALL
NEW FA DEVICES AS REQUIRED, IN COMPLIANCE WITH THE POWER PLANAND ANSUL
WIRING DIAGRAM, LANDLORD'S CRITERIA, NFPA AND LATEST APPLICABLE
CODEREQUIREMENTS. TIE TENANT'S FA SYSTEM TO THE BASE BUILDING FA SYSTEM AS
REQUIRED.11. FURNISH AND INSTALL DUCT SMOKE DETECTOR, RELAY AND REMOTE
INDICATOR FOR A/C UNIT. TIERELAY INTO DUCT MT'D SMOKE DETECTOR WHICH WHEN
ACTIVATED WILL SHUT DOWN THE A/C UNITFAN, HOOD SUPPLY FAN HOOD EXHAUST FAN
AND SIGNALTHE BUILDING FIRE LIFE SAFETY SYSTEM.PROVIDE CONDUIT, WIRES AND
MAKE ALL CONNECTIONS AS REQUIRED. DETERMINE BEST LOCATIONOF REMOTE
INDICATOR AT SITE.12. THE CONTRACTOR SHALL COORDINATE WITH THE KITCHEN
APPLIANCES CONTRACTOR AND PROVIDEALL HARDWARE AND CONNECTIONS AS REQUIRED.
THIS IS TYPICAL.13. THE CONTRACTOR SHALL BE RESPONSIBLE TO PROVIDE AND
INSTALL ALL CABLES ANDCONNECTIONS, AS REQUIRED, OF ALL COMPONENTS THAT ARE
PART OF THE EXISTING WALK-INCOOLER AND FREEZER TO BE FULLY FUNCTIONAL.14.
CONTRACTOR SHALL MAKE SURE THAT CONDUIT PENETRATIONS OF THE EXISTING WALK
IN COOLERAND FREEZER ARE SEALED ON THE INSIDE IN COMPLIANCE WITH N.E.C.
ART. 300-7 "REQUIREMENTTO PREVENT CONDENSATE BUILD UP WITHIN THE
CONDUIT".15. CONTRACTOR SHALL COORDINATE WITH OWNER AND ROUTE POWER SUPPLY
TO THE PRODUCTIONCOUNTER, ITEM #H12.2P, ITS RELATED EQUIPMENT, ITEMS #D92,
#94 AND #J41 FROM JUNCTIONBOX IN THE ADJACENT WALL THROUGH 4"X4" OPENING IN
THE SIDE OF THE EXHAUST HOOD TO THEPRE-WIRED JUNCTION BOX WITHIN THE
PRODUCTION COUNTER, REFER TO EQUIPMENT SPEC. SHEETSFOR DETAILS.16.
CONTRACTOR SHALL COORDINATE WITH KITCHEN EQUIP. CONTRACTOR AND ROUTE 208V,
1Ø,CIRCUIT WITH NEUTRAL AND GRND CONDUCTORS FOR ICE MACHINE. FURNISH JB OR
SPECIALOUTLET AS REQ'D AND MAKE NECESSARY CONNECTIONS OF REMOTE
CONDENSER.17. CONTRACTOR SHALL COORDINATE WITH KITCHEN AND REFRIGERATION
CONTRACTORS ANDDETERMINE EXACT RATING OF ALL EQUIPMENT AND TYPE OF REQUIRED
POWER LEAD CONNECTIONSAT EACH EQUIP. MUST ADJUST SIZE OF BREAKERS IF OR AS
REQUIRED. THIS IS TYPICAL.18. DETERMINE EXACT LOCATION OF HOOD AND ANSUL
PANELS AT SITE WITH HOOD PACKAGE.CONTRACTOR SHALL ROUTE POWER CIRCUIT FOR
EXHAUST AND SUPPLY FANS FROM POWER PANELTO THE HOOD PANEL AND FROM HOOD
PANEL TO THE EXHAUST AND SUPPLY FANS. COORDINATEWITH HOOD MFG. DRAWING FOR
ADDITIONAL INFORMATION. THE CONTRACTOR SHALL FURNISH ANDINSTALL208V, 3
POLE, FUSED NEMA 3R, DISC. SWITCHES FOR EXHAUST AND SUPPLY FANS. FURNISHAND
INSTALL WP, GFI OUTLET NEAR FANS ON THE ROOF. MAKE ALL CONNECTIONS AS
REQUIRED.19. CONTRACTOR SHALL COORDINATE WITH MECHANICAL CONTRACTOR AND
INSTALL POWER SUPPLYFOR NEW A/C UNITS, MAKE ALL REQUIRED CONNECTION AND
WIRING.20. ALL CONDUIT PENETRATIONS THROUGH CASEWORK SHALL BE CLEAN, TIGHT
AND SEALED WITHWHITE SILICONE. THIS IS TYPICAL.21.PROVIDE KEY-LOCK TABS AT
THESE CIRCUITS. ROUTE CASH REGISTER CIRCUITS WITH AN ISOLATEDGROUND
CONDUCTORS.22. CONTRACTOR SHALL COORDINATE WITH LANDLORD AND REUSE EXISTING
200 AMP, 277/480V, 3PH,4W POWER SUPPLY IN COMPLIANCE WITH THE RISER
DIAGRAM, PANEL SCHEDULES, AND ASDESCRIBED BELOW:a) VERIFY THAT EQUIPMENT AT
THE LANDLORD'S METER CENTER INCLUDING DISC. SWITCH, METER,FEEDERS AND
CONDUITS TO TENANT SPACE IN COMPLIANCE WITH RISER DIAGRAM AND
N.E.CAPPLICABLE CODE.b) REUSE EXISTING PANELS "H", "A" AND REPLACE EXISTING
PANEL "B" WITH NEW IN COMPLIANCEWITH THE RISER DIAGRAM AND PANEL SCHEDULES.
ALL BREAKERS IN ALL PANELS SHALL BEBOLTED TYPE BREAKERS. REFER TO FOOT
NOTES AT PANEL SCHEDULES.d) THE GROUNDING SYSTEM SHALL BE INSTALLED TO
COMPLY WITH N.E.C. STD #250REQUIREMENTS. ALL EQUIPMENT SHALL BE GROUNDED IN
COMPLIANCE WITH N.E.C. STD. #250AND UL REQUIREMENTS.e) REUSE EXISTING 75
KVA TRANSFORMER IN COMPLIANCE WITH RISER DIAGRAM.23. COORDINATE WITH TENANT
AND INSTALL NEW BELL/BUZZER AS REQ'D., INSTALL BELL BUTTON ASSHOWN ON THE
DRAWING. INSTALL BUZZER XFRMR, IN CEILING AND WIRING AS REQUIRED TO MAKEIT
FUNCTIONAL.24. PROVIDE SHUNT TRIP CIRCUIT BREAKER TO ALL EQUIPMENT UNDER
THE HOOD. INTERLOCK SHUNTTRIP W/ HOOD ANSUL SYSTEM.25. COORDINATE WITH
OWNER AND ROUTE POWER SUPPLY TO THE RECEPTACLES SERVING THE FRYERBATTERIES,
ITEMS #A10.U2 AND #A10.U3 THROUGH 4"X4" OPENING IN THE SIDE OF THE
EXHAUSTHOOD. REFER TO HOOD DRAWING, SHEET M2.0.WEST COUNTY CENTER89 WEST
COUNTY CENTER DRIVE, SPACE FC14DES PERES, MISSOURI 63131Shane R.Hamilton,
P.E.ELECTRICAL POWER PLANSCALE: 1/4" = 1'-0"RECESSEDPROVIDE ALL REQ'D.
HARDWARE0-10V DIMMING10%-100% DIMMINGA2X4 LED FLAT PANELLITHONIACPX 2X4
AL08 SWW7MLED (36W) 4000 LUMEN12036SURELITECC-2FURNISHED
W/UNITUNIVERSAL1205SYMBOLDESCRIPTIONMANUFAC.CATALOG LAMPMTG.
VOLTREMARKSWATTTOTAL EMEXEXIT LIGHTATLITEPNLRUFURNISHED
W/UNITUNIVERSAL12090 MINUTE BATT. BACKUP POWER590 MINUTE BATT. BACKUP
POWEREMERGENCY LIGHTTYPELIGHTING FIXTURE SCHEDULEIC22LED G4 14LM 3000K90CRI
120 ZT24 WWH TRIMRECESSED DOWN LIGHTRECESSED17.4 WATT
LED17.4BJUNO12010%-100%
DIMMINGJB-1121B-92118JZ2424A-6B-17B-2,415JB-38,40B-18,2024JA-25,27A-9GFI2425256ZZZZZZB-5B-39ZA-5TIE
TOGFIZEF-1 ONROOFGFIZA-10Z9SRRT1911ZINSTALL POWER ANDDATA OUTLETS TOBACK
SIDE OF MENUBOARD SOFFIT 12"FROM INSIDE
CORNERB-35ZGFIIG21B-6GFIZZZGFIIGGFIIG
B-12B-247799HD102121B-38GFIZELECTRICAL POWER SUPPLY FORKITCHEN EQUIPMENT IN
THE EXHAUSTHOOD AREA SHALL BE COORDINATEDWITH THE OWNER PRIOR TOELECTRICAL
ROUGH-IN.ZGFIGFIB-3ZGFIA-40SF-1 ONROOF18ELECTRICAL LIGHTING PLANSCALE: 1/4"
= 1'-0"ALL CAMERAS TO BECEILING MOUNTEDG.C. TO COORDINATE WITH OWNERTHE
EXACT NUMBER ANDLOCATIONS OF CAMERAS, PROVIDEAND INSTALL REQUIRED
CONDUITSAND WIRING ACCORDINGLYALL NON-CAMERA CAT 6CABLES ARE TO
BETERMINATED IN AKEYSTONE BY CONTRACTOR.ALL CAMERA CAT 6 CABLESARE TO BE
TERMINATEDWITH RJ45 ON BOTH ENDSBY G.C.COMMUNICATION AND DATA PLANSCALE:
1/4" = 1'-0"STORAGE ROOMAMP/POLE15A/1P OR 15A/2P- PROVIDE BRANCH CIRCUIT
FEEDERS AS NOTED ABOVE UNLESS NOTED OTHERWISECONDUCT.(2) #12#121/2"GND.
CONDUCT.CON.20A/1P OR 20A/2P(2) #12#121/2"15A/3P OR 20A/3P(3)
#12#121/2"25A/1P OR 25A/2P(2) #10#103/4"30A/1P OR 30A/2P25A/3P OR
30A/3P35A/1P OR 35A/2P(2) #8#1040A/1P OR 40A/2P35A/3P OR 40A/3P45A/1P OR
45A/2P(2) #6#101"50A/1P OR 50A/2P(2) #10#103/4"(3) #10#103/4"3/4"(2)
#8#103/4"(3) #8#103/4"(2) #6#101"45A/3P OR 50A/3P(3) #6#101"60A/1P OR
60A/2P(2) #4#81"60A/3P(3) #4#81 1/4"70A/3P OR 80A/3P(3) #4#81 1/4"90A/3P(3)
#3#81 1/4"100A/3P OR 110A/3P(3) #2#61 1/2"125A/3P(3) #1#61 1/2"BRANCH
CIRCUIT FEEDER
SCHEDULEGFIA-14B-32A-12B-42ZZZGFIZZB-32B-21,23,25GFIZGFIGFIGFIGFIGFIFINSTALL
POWER ANDDATA OUTLETBEHIND THE KDS @7'-0" A.F.F.A-5TIE
TO7ZZB-34A-13,15,1718ZZTIE TOB-26TIE TOB-26GFIGFIZGFIGFIA-24PANEL "B"PANEL
"H"22222210HDJ1716ZA-21,23GFIGFIZA-361314ZA-13,15A-18SEVAP-FZCU-F1413SZZA-16EVAP-CA-39,41CU-CGFIB-1GFIZFFZA-4ZA-17,19ZB-28,30ZA-38GFIGC
TO PROVIDE AND INSTALL THEFOLLOWING AT THE MANAGER'S DESK:1. UNDER
MANAGER'S DESK - (1)QUAD POWER 8" A.F.F.2. ABOVE MANAGER'S DESK-
INSTALL3'X3'X3/4" PLYWOOD PAINTEDBLACK 6" BELOW CEILING, (1)QUAD POWER
INSTALLED ON LEFTSIDE OF PLYWOOD
BOARDZZA-31,33A-35,37GFIZB-19ZZB-29,31A-30,32FAHU-1H-8,10,12H-2,4,6H-7,9,11PANEL
"A"EXISTINGWATERHEATERSTORAGE
ROOMN/LAZZZZZZZZZSaSbZA-11AAAAAAAAASaZSaSaSaSaSbSbSbSb421ZZEMXEMXEMX42ZZZA-5(4)
RECESSED OUTLETSFOR DIGITAL MENUBOARDS2STOREFRONT SIGNSA-7VIA
T/C3JZZZZZZZZZZZZZZZZZZBBBBBBBBBBBBBBZA-3S111SZA-1TIE TOAA18"I.G.A.F.F.G.C
TO PROVIDE TO EA.REGISTERS (4) CAT 6 LINESPER REGISTER. (12
TOTAL)18"A.F.F.I.G.18"I.G.A.F.F.1675G.C TO PROVIDE TO EA.DMB (2) CAT 6
LINES PER TV(8 TOTAL)INSTALL POWER ANDDATA OUTLETS TOBACK SIDE OF MENUBOARD
SOFFIT 12"FROM INSIDE CORNERG.C TO PROVIDETO EA. KDS (3) CAT6 LINEG.C TO
PROVIDETO EA. KDS (2) CAT6 LINEINSTALL POWER ANDDATA OUTLETBEHIND THE KDS
@7'-0" A.F.F.32GC TO PROVIDE AND INSTALL THEFOLLOWING AT THE MANAGER'S
DESK:1. UNDER MANAGER'S DESK - (1)QUAD POWER 8" A.F.F.2. ABOVE MANAGER'S
DESK-INSTALL 3'X3'X3/4" PLYWOODPAINTED BLACK 6" BELOW CEILING, (1)QUAD
POWER INSTALLED ON LEFTSIDE OF PLYWOOD BOARDG.C TO PROVIDE TOEA. CAMERA (1)
CAT 6LINEG.C TO PROVIDE TOEA. CAMERA (1) CAT 6LINEG.C TO PROVIDE TOEA.
CAMERA (1) CAT 6LINEON ROOFCU-1PANEL
B-14EXISTINGEXISTINGNEWH-14,16,18DH-1EXISTING19TIE
TOB-26GFIWPZ101010GFIGFIGFIGFIGFIFLOOR MOUNTED75 KVA
XFRMR22EXISTING48SPARESPARESPARECONTRACTOR IS RESPONSIBLE FORFURNISHING,
INSTALLING ANDTERMINATING ALL CAT6E CABLES INCONDUITS AND TAGGING ON BOTH
ENDS.ZZA-20,22,24OWNER TO INSTALL: MENU BOARD(DMB'S), KITCHEN DISPLAY
SCREENS(KDS'S), POINT OF SALES (POS'S), DATARACK AND SECURITY
CAMERAS.03-27-20241REVISED PER LANDLORD1ZZ11LANDLORD REVIEWED 04/18/24
SJCLANDLORD MEP REVIEWApproved as SubmittedApproved as NotedRevise and
ResubmitBy T/E/S: Date:This review is for conformance to Landlord Criteria
only. Allengineering design, including code conformance is the
Tenant'sresponsibility. Verify all conditions in the field prior to
construction.SJC 04/18/24

11.
WEST COUNTY CENTER89 WEST COUNTY CENTER DRIVE, SPACE FC14DES PERES,
MISSOURI 63131Shane R.Hamilton, P.E.E2.0RISER DIAG. NOTES:THE CONTRACTOR
SHALL COORDINATE WITH THE LANDLORD VERIFY EXISTING BUS PLUGGEDFUSED DISC.
SWITCH, ELECTRIC METER, POWER SUPPLY FEEDER AND CONDUITS FROM METERCENTER
TO TENANT'S SPACE ARE IN COMPLIANCE WITH THE RISER DIAGRAM AND N.E.C.
CODEREQUIREMENTS.AS REQUIRED INSTALL NEW GROUNDING SYSTEM IN COMPLY WITH
RISER DIAGRAM AND WITHN.E.C. STD. #250, REQUIREMENTS.REUSE EXISTING 75 KVA
XFRMR AS SHOWN. THE XFRMR SHALL BE DRY TYPE WITH 6STANDARD VOLTAGE
REGULATION TAPS. THE NEUTRAL OF THE TRANSFORMER SHALLBE BONDED WITH THE
BUILDING STEEL AND TO THE INCOMING COLD WATER METALPIPE WITH EXOTHERMIC
WELD CONNECTIONS AS SHOWN ON THE RISER DIAGRAM.INSTALL NEW AS
REQUIRED.PANEL SCHEDULES, RISERDIAGRAM AND DETAILS1235REUSE EXISTING PANELS
"H", "A" AND REPLACE EXISTING PANEL "B" WITH NEW INCOMPLIANCE WITH THE
RISER DIAGRAM AND PANEL SCHEDULES. ALL PANELS SHALL BEWITH BOLTED TYPE
BREAKERS.ELECTRICAL POWER RISER DIAGRAMSCALE: NONEEXISTINGJB FOR CENTRAL TO
LANDLORD'S(2)ALARM, (CONTRACTOR TOCONTROL CIRCUITTO A/C FANSPARETYPICAL
SHUNT TRIP RELAY CONTROLGAS SUPPLY SOLENOIDVALVEENCLOSURE, CLASS -RELAY
SQ.-"D" CLASS8501 TYPE XM040-VO2120 VAC COIL, NEMA 19991-UE7.HNcLOCATED
INANSUL SYSTEMCONTROL HEAD.CONTACTVERIFY)FIRE DETECTIONCONTACT
FROMSYSTEM.(1)(1)(2)COORDINATE WITH THE LANDLORD AND TIE IT TO THE
LANDLORD'S CENTRAL ALARM SYSTEM IF REQUIRED. COORDINATE WITH LANDLORD'S
FIRECONTRACTOR FINAL CONNECTION TO LANDLORD'S SYSTEM MUST BE BY LANDLORD'S
CONTRACTOR AT TENANT'S EXPENSE.SHUNT TRIP BREAKER USEDFOR UNDER HOOD
COOKDEVICES.SEQUENCE OF OPERATION: UPON ACTIVATION OF THE ANSUL SYSTEM,
AND/OR FIRE DETECTION SYSTEM. ALL EQUIPMENT UNDER HOOD, AHU FANAND GAS
SUPPLY SOLENOID VALVE SHALL AUTOMATICALLY SHUT OFF. EXH FANS SHALL BE
LOCKED IN "ON" POSITION.4.EXISTING TRANSFORMER=75 KVAEXISTING75 KVA7 DAY,
24 HRSPROGRAMMABLE TIMECLOCK T/CEXIST. COLDWTR METALPIPE200AF200
AMPMCB12MROOMSPACEELECTRICALTENANTMCBT/CEXIST.4-#3/0, CU,1-#6, CU, GRND, IN
2"C.12PANEL"A"PANEL"H"NEW 1-#8, CU, TO GRND,BLDG. STEEL AND COLD WTRMETAL
PIPE PER N.E.C. #250.EXISTING 4-#4/0, CU,1-#6, CU, GRND,1-#6, CU, ISO.
GRND,IN 2" C.EXISTING 75 KVA DRY TYPE XFRMR. 480 V."DELTA" PRIMARY 120/ 208
V. "WYE"SECONDARYEXISTING 3-#2, CU,1-#8, CU, GRND,IN 1-1/4"
C.242323255EXIST.DISC SWEXIST. 200A DISC. SW LL'S DIST.BOARD FOR 277/480V,
3Ø,SERVICEEXIST ELEC. MTR12VERIFY LOCATION AT SITEEXIST LANDLORD'S WIRE
WAY"B"MLO236VERIFY EXISTING POWER FEEDERS ARE IN COMPLIANCE WITH THE RISER
DIAGRAM.6INSTALL NEW POWER FEEDERS IN COMPLIANCE WITH THE RISER
DIAGRAM.NEUTRAL CONDUCTORR- SMALL LINES INDICATE POWER NON GROUNDED
CONDUCTORS. REMOTE INDICATOR/TEST STATION - REFER TO THE CODED NOTE
NUMBER.UNDER GROUND CONDUIT RUN CONCEALED IN WALL, CEILING OR DUCT SMOKE
DETECTOR 6264B-001/6260A-100/6261-003-6251B-001A- BIG LINE INDICATES -
GROUND CONDUCTORCONSISTING OF: Z ZHEAT DETECTOR
-281B6262A-001ENCLOSURE-MR-199X-13/CRISMAGNETIC DOOR HOLDER-1504-AQSURFACE
MOUNTED POWER PANELTHREE OR FOUR WAY SWITCH80" A.F.F.MANUAL PULL STATION -
270-SPO 42" A.F.F.WATER HEATERFAN SHUT DOWN RELAY W/FMFWHCOMPUTER/DATA
JACKTWO WAY SWITCHDIMMER SWITCHS3(4)SDSAT A HEIGHT TO THE BOTTOM AS
QUADRUPLEX WITH 120V, 20 A.TELEPHONE JACKDISCONNECT SWITCHJJUNCTION
BOXHEIGHT AS NOTEDNOTED.BOTTOM UNLESS NOTED OTHERWISEDUPLEX W/ISOL. GRND
CONDUCTORAT COUNTER SHALL BE 42" AFF TODUPLEX W/GRND F. INTERRUPTER120 V,
20 AMPERE RATING.HEIGHT 16" TO BOTTOM UNLESS BOTTOM UNLESS NOTED
OTHERWISECOUNTER SHALL BE 40" AFF TODUPLEX RECEPT. OUTLET ABOVENOTED
OTHERWISE. (TYP.)DUPLEX RECEPTACLE WITH IGGFI40"2'X4' FLUORESCENT NIGHT LT
(N/L)SYMBOLSHDHORN/STROBE-792-7A-006/110 cd OUTPUT LOADVOLTCONNECTED
(KVA)FACTORDEMAND (KVA)TOTALPANEL "A" + PANEL 'B" PANEL "H" LOAD
ANALYSIS200 AMP, 277/480V, 3Ø, 4W. 277/480, 3Ø POWER SUPPLY
CALCULATIONS:TOTAL DEMAND LOADSDEMAND CURRENT/Ø 3.EXISTING POWER
SUPPLY2.1.===KVAAMPS @ 277/480V,3Ø4.EXISTING PANEL "H"=CONV.
OUTLETS1201.00DEMAND (KVA) 120/208, 3Ø POWER SUPPLY CALCULATIONS:TOTAL
DEMAND LOADSDEMAND CURRENT/Ø 3.2.1.==LOADVOLTCONNECTED
(KVA)FACTOR120/208TOTALKITCHEN EQUIPMENTMISCELLANEOUSLIGHTING
1201200.651.25EXISTING PANEL "A" =200 AMP MCB, 120/208V, 3Ø, 4W.KVA AMPS @
120/208V,3ØMOTORS2081.251.000.304.826.0350.450.301.341.34120/20875
KVA0.0151.13PANEL "A" +"B" LOAD ANALYSISTOTALTOTALPHASEWITH ISO & EQUIP.
GROUND BUSSESDESCRIPTION OF LOAD17293133352725232119ØAKVA PH
LOADPAMPBRKR511791315ØCØBA31NOCIRMCB: MLO: A.I.C.: VOLTS: DESCRIPTION OF
LOAD18303234362620242228KVA PH LOAD68141610124NOCIR2B CØBØAAMPBRKRPØCMTD:
BLDG: N/A120/208 VPOPEYES LOUISIANA KITCHENROOF RECEPTACLELEGENDKKITCHEN
EQUIPMENT3940TOTAL4142TOTALPHASEPHASE: 3, S/NWITH EQUIP. GROUND
BUSDESCRIPTION OF LOAD1729313335372725232119ØAKVA PH
LOADPAMPBRKR511791315ØCØBA31NOCIRMCB: MLO: A.I.C.: VOLTS: DESCRIPTION OF
LOAD1830323436382620242228KVA PH LOAD68141610124NOCIR2B CØBØAAMPBRKRPØCMTD:
WIRE: 4(2)ROUTE THIS CIRCUIT WITH ISO. GROUND CONDUCTOR.(3)ROUTE THESE
CIRCUITS THROUGH THE TIME CLOCK T/C.(1)TOTAL CONNECTED AMPSØBØAØCTOTAL
CONNECTED KVABLDG: (1)LIGHT KITCHEN (A)/EM/EXMENU BD UNDERCOUNTER REFRIG.
(#J41)SODA DISPENSER (#K30)TRIP REL/TCHOOD CONTROLS (#F11)EXISTING PANEL
"A"POPEYES LOUISIANA
KITCHEN1.200.300.500.620.440.180.15LEGENDIMISCELLANEOUSLIGHTINGRECEPTACLEKITCHEN
EQUIPMENTRKLPROVIDE LOCK TAB AT THESE BREAKERS IN "ON"
POSITION.L0.50BAG-N-BOXSALES (E, C)0.60ICE CUBER (#K10)2021.27KICE BATTER /
SIFTERTABLE (#A47.2A)0.30IRMANAGER'S DESK RECEPTACLES1.000.30POS (#P20,
P30)(2)(1)TOTAL CONNECTED AMPSØBØAØCTOTAL CONNECTED KVATEA BREWER
(#K71)(2)PROVIDE THIS BREAKER WITH SHUNT TRIP
DEVICE.120120RRECEPTACLEMOTORMK1.700.60FREEZER (#A54)1.381.80TOASTER
(#C21)2200.850.852KHOT WATER DISPENSER (#D70)252.252.25HOT WATER DISPENSER
(#D70)2522.252.25250CHUBB WARMER (#D81.1)202HOLDING UNIT (#D92)K2HOLDING
UNIT (#D94)K(1)201(3)PROVIDE THIS BREAKER WITH SHUNT TRIP DEVICE.KKANSUL
SYSTEM (#N50)FRYER BATTERY (#A10.30)1.02RESERVED FOR SHUNT TRIP2RESERVED
FOR SHUNT TRIP2201(2)(3)(1)1.27RESERVED FOR SHUNT TRIP0.30TTB
RECEPTACLE(3)K201IR120K120KWORKTOP REFREG. (#B30.48) 1.401PRODUCT HOLDING
UNIT (#C17) 0.18200.70UNDERCOUNTER REFREG. (#C18) POS (#P20,
P30)R0.30(2)(1)0.18120KKKKHAIR CONDITION/HEAT120KK201(1)I120120SIGN
(T/C)1RK120120120WWATER HEATERK0.58MARINATOR (#A31)201SPACE(1)PROVIDE LOCK
TAB AT THESE BREAKERS IN "ON" POSITION.K120120R1202010.54PHASE: 3,
S/N202.33HOLDING CABINET (#D90.1)KMSF-10.30POS (#P20,
P30)120R(2)(1)153EF-1HOLDING BIN (#C22)K2020.85KMICROWAVE OVEN
(#D20)0.85SPACECUPPING STATION (#D30)2021.101.10KFROZEN LEMONADE DISPENSER
(#K73)1201202010.452.40120PROD. COUNTER FRY DUMP (#H12.2P)KBIRD CAGE
(#H12.1)3012.25BIRD CAGE BACK HEATERS (#H12.1)403.223.22RESERVED FOR SHUNT
TRIP(2)1.391.392.09302.092.4230BIRD CAGE FRONT HEATERS (#H12.1)2.42K0.10
WALK-IN COOLER LIGHTL1.18WALK-IN FREEZER EVAP (#E10.2)120LLIGHTINGNEW PANEL
"B"394041423738SPACE128.97128.39124.73201K1.00220WALK-IN FREEZER CU
(#E10.2)K1.00KCONVECTION OVEN (#B11)3032.67FRYER BATTERY
(#A10.20)1.02RESERVED FOR SHUNT
TRIP(3)K2013.923.92TTRANSFORMER/PANEL/ATS(4)REFER TO SUBPANEL SCHEDULE FOR
THIS LOAD DETAILS.MICROWAVE OVEN (#D20)120201RECESS120/208
VRECESSSPACE2.672.671.445.978.028.989.04K7.506.4715.4515.01SPACEN/AWIRE:
4RECESSTTRANSFORMER/PANEL/ATSPHASE: 3, S/NLEGENDMCB: WITH GROUND BUSVOLTS:
A.I.C.: TOTAL CONNECTED KVAØAØBØCMTD: BLDG: 277/480 VWIRE: 4EXISTING PANEL
"H" POPEYES LOUISIANA KITCHEN(1)PHASEDESCRIPTION OF
LOAD12TOTAL1814PØABRKRAMPKVA PH LOADØBØCA31CIRNO6108TOTALØBKVA PH
LOADNOCIRB C42ØABRKRPØC AMPDESCRIPTION OF LOADREFER TO PANEL "A" SCHEDULE
FOR THIS LOAD DETAILS.MLO: N/A5971611171315SPACE160158HAIR
CONDITION/HEAT(1)162TOTAL CONNECTED AMPS1.18WALK-IN COOLER EVAP
(#E10.1)K1202021.101.10K0.10120CUPPING STATION (#D30)KSPACE15.52ICE BATTER
/ SIFTERTABLE (#A47.2A)MATCH EXISTINGEXISTINGWALK-IN COOLER CU
(#E10.1)XFRMR LOSSES480(3)(3)200 AMP200 AMPSEE LOADANALYSISWWATER HEATER200
AMPSPACE126.89 122.74200 AMP MCB, 277/480V, 3Ø, 4W.126Q30.001SIGN
LOGOQ12.001PRE-SELL MENUBOARD, DIGITAL 1 PANELQ11.001MENUBOARD, DIGITAL 3
PANELSP30.003PRINTER115P20.003CASH REGISTER115M30.00SAFE5.0K30.00SODA
DISPENSER, 12 HEADS, DROP-IN1.5115K42L.00BAG-N-BOX RACK /W 2
CARBONATORS17.21/318"KITCHEN ELECTRICAL SCHEDULEITEMNOQTYCATEGORYVOLTAGE
PHASE AMPS CYCLE HP KW CONN. TYPE NEMA CONN. HTELECTRICAL REMARKSA10.201
FRYER12018.5 60CORD & PLUG5-15P12"A10.301 FRYER12018.5 60CORD &
PLUG5-15P12"A31.001 MARINATOR12013.1 60.1CORD & PLUG5-15P12"A47.2A 1BATTER
CART12011.6 60CORD & PLUG5-15P12"A47.4014-PAN BATTER TABLE 100" (SIFTER ON
LEFT)12011.6 60CORD & PLUG5-15P12"A54.00L1 REACH-IN FREEZER1201
7.2601/2CORD & PLUG5-15P 90"A55.001THAW REFRIGERATOR120112.0 601/2CORD &
PLUG5-15P 90"B10.001CONVECTION OVEN, ELECTRIC208 3 24.0 601/28.0CORD &
PLUG15-30P 48"B30.481REFRIGERATOR, WORK TOP12013.2 601.63CORD &
PLUG5-15P12"C17.00 1 PRODUCT HOLDING UNIT120112.0 601.386CORD & PLUG5-15P
48"C18.001UNDERCOUNTER REFRIGERATOR12012.9 601/4CORD &
PLUG5-15P12"C21.001TOASTER120115.0 60CORD & PLUG5-15P 48"C22.00 1 PROTEIN
HOLDING12018.33 601.0CORD & PLUG5-15P 66"D20.002 MICROWAVE OVEN208120
603.0CORD & PLUG6-2046" & 58"5.5 FT CORDD30.011 PACKING TABLE20815.8 60CORD
& PLUG6-20P12"1 DIPPER WELL1201 160.1CORD & PLUG5-15P12"D70.002HOT WATER
DISPENSER208119.5 604.05 CORD & PLUG85" CORD & PLUG SUPPLIED BY
ECD81.101THERMALIZER OVEN CABINET, ELECTRIC208134.7 607.212CORD & PLUG6-50P
48"D90.101PROOFER CABINET, MOBILE, UNDERCOUNTER120119.4 60CORD &
PLUG5-20P12"D92.001 PROTEIN HOLDING208118.4 603.830CORD & PLUG6-30PPLUGS
INTO H12.20 - LOCKING PLUGD94.001 SIDE HOLDING208114.6 603.04CORD &
PLUG6-20PPLUGS INTO H12.20 - LOCKING PLUGE10.101WALK-IN COOLERDIRECTREFER
TO MFR. SPECIFICATIONSE10.201WALK-IN FREEZERDIRECTREFER TO MFR.
SPECIFICATIONSF15.001 FRYER HOODDIRECTREFER TO MFR. SPECIFICATIONSH12.101
MFB 5 VAT EZ OVER BIRD CAGE120/208DIRECTFROM ABOVE- J BOX FOR CIRCUITS
LISTED BELOWH12.201 MFB 5 VAT EZ OVER MODULAR COUNTER120/208DIRECTJ41.001
UNDERCOUNTER REFRIGERATOR1201 4.260CORD & PLUG5-15PPLUGS INTO H12.20 -
LOCKING PLUGK10.001ICE MAKER20819.5 60DIRECT78"1REMOTE CONDENSER
UNIT20811.8260DIRECTK71.001TEA BREWER1201 14.4601.73CORD & PLUG5-15P
48"K73.001 FROZEN DRINK MACHINE120112.0 601.440CORD & PLUG5-15P
48"N10.002HAND SINK1201.560CORD & PLUG5-15P24"N10.101HAND SINK,
DROP-IN1.560CORD & PLUG5-15P18"CORD & PLUG5-15P115 16060CORD &
PLUG5-15P115CORD & PLUG15-15PCORD & PLUGCORD &
PLUG5-15P5-15P18"18"115111511511CORD & PLUGCORD &
PLUGDIRECT5-15P5-15P5-15P480V, 30, OR 240V, 30, OR 240V, 10, OR 208V,30, OR
208V, 10 RECEPTACLE FOR KITCHENEQUIP. WITH AMPERE RATING AS SHOWN ATPANEL
SCHEDULE.B-14 (2)PIPES TO ACCOMMODATEALL CAT 6E CABLESNETWORK
RAKMONITORKEYBOARDPRINTERCALC.3'-4"3'-4"4'-8"TYPICAL ELECT. AND DATA
INSTALLATION DETAIL AT OFFICE DESK1.30120THAWING CAB.
(#A55)KK12.4211.516.832.853.269.1615.2714.77132.8815.9977.61183200 AMP200
AMP320AHU-1330CU-1HHNEW 75 KVA XFRMR / PANEL "A" & "B"WATER
HEATERTW90320329.7030.2230.794.004.004.003.263.403.403.4044EXIST.EXIST.34.7934.2233.70A/C4801.00WATER
HEATER48012.000.657.803.40330EXISTING MAKEUP AIR DUCT HEATER
DH-1H3.403.40FEED THRU TO PANEL "B"FEED THRU FROM PANEL "A"PANELNEWNEW
4-#4/0, CU,1-#6, CU, GRND,1-#6, CU, ISO. GRND,IN 2"
C.20.660.660.66KSPACE1.43320M1.431.436.277.8465.9665.9690.3490.3465.9603-27-20241REVISED
PER LANDLORD3.263.2610.06 10.06
10.0644.8544.2843.7630.1830.18132.52105.07105.071LANDLORD REVIEWED 04/18/24
SJC

12.
ELECTRICAL SPECIFICATIONS AND INSTRUCTIONS FOR INSTALLATION WORKTHE
ELECTRICAL CONTRACTOR REQUIREMENTS AND
INSTRUCTIONS:1.2.101.2.71.2.81.2.9EXCEPTIONS:BID PRICE:SUCCESSFUL
BIDDER:MATERIAL TAKE
OFF:1.2.51.2.61.2.11.2.21.2.31.2.41.1.51.1.61.21.1.31.1.43.33.53.43.13.03.2INSTALLATION
INSTRUCTIONS:GENERAL:2.122.112.132.82.102.92.62.72.32.42.5TIME CLOCK OR
TIME SWITCH:GUARANTEE:LIGHTING DEVICES:DEVICE PLATES:BALLASTS:LAMPS:OUTLET
BOXES AND FITTINGS:RECEPTACLES:SWITCHES AND DIMMERS:CABLE:CONDUITS:BIDDING
INSTRUCTIONS:QUALIFICATIONS:BIDDERS QUALIFICATIONS AND
INSTRUCTIONS:1.1.11.1.21.12.12.02.2CONDUCTORS:GENERAL:PRODUCTS:3.93.173.183.193.133.153.143.163.103.113.124.54.6DISCONNECT
SWITCHES:FUSE:4.24.34.4PANEL BOXES:PANEL TRIM:CIRCUIT
BREAKER:3.63.73.84.1PANEL BOARDS:THE ELECTRICAL CONTRACTOR SHALL PURCHASE
AND USE ALL "NEW" MATERIAL AS SPECIFIED AND SHOWN ON THE ELECTRICAL PLAN
OFTHIS PROJECT. ALL THE MATERIAL SHALL BE FREE FROM DEFECTS AND SHALL CARRY
A "UL" LABEL.ALL INSULATED CONDUCTORS SHALL BE UNCOATED COPPER OF 98%
CONDUCTIVITY, 600 VOLT AC, DUAL RATED, TYPE THHN/THWN ASNECESSARY TO MEET
THE DESIGN REQUIREMENTS AND THE APPLICABLE CODES. THW (FOR # 4 AWG AND
LARGER) AND THERMO PLASTICWIRES RATED FOR 75 DEGREES CENTIGRADE OPERATIONS
IN WET AND DRY LOCATIONS AND 90 DEGREES CENTIGRADE WITHIN ELECTRICDISCHARGE
LIGHTING EQUIPMENT MAY BE USED. CONDUCTORS NUMBER # 10 AWG AND LOWER SHALL
BE SOLID COPPER AND #8 AWG ANDABOVE SHALL BE STRANDED COPPER. THE MINIMUM
SIZE OF WIRE SHALL BE # 12 AWG FOR 20 AMP BREAKER, # 10 AWG FOR 30
AMPBREAKER, # 8 AWG FOR 40 AMP BREAKER.SIGNAL CABLES, IF USED, SHALL BE
COPPER AND SHALL MEET ALL UL AND N.E.C. CODE REQUIREMENTS. METAL CLAD (TYPE
MC), ARMORED(TYPE AC) AND NON- METALLIC (NM) CABLES SHALL NOT BE USED. ALL
CABLE ASSEMBLIES SHALL CONTAIN COPPER GROUND CONDUCTOR.THE CONDUITS SHALL
BE ELECTRICAL METALLIC TUBING (EMT) AND HOT DIPPED GALVANIZED STANDARD
STEEL AS MANUFACTURED BYWHEATLAND TUBE COMPANY OR EQUIVALENT.OUTLET BOXES,
FITTING CLAMPS AND HANGERS ETC. SHALL BE GALVANIZED STEEL, RUST RESISTANT
AND COMPATIBLE WITH THE RACEWAY.OUTLET BOXES FOR FIXTURES, SWITCHES, AND
RECEPTACLES SHALL HAVE SMOOTH ROUND EDGES AND SHALL BE WITH COVER
PLATES.BOXES SHALL BE "STEEL CITY" OR EQUIVALENT. FITTINGS FOR EMT CONDUITS
SHALL BE COMPRESSION TYPE. NO SET SCREW WILL BE USED.UNUSED HOLES SHALL BE
COVERED WITH APPROVED INSERT CAPS.SWITCHES AND DIMMERS SHALL BE TOTALLY
ENCLOSED, RATED AT 120/277 VOLTS AC, 20 AMPS, 2000 WATTS WITH GRAY TOGGLE
ANDDEVICE PLATE. THESE SHALL BE QUIET OPERATION, COMMERCIAL GRADE AS
MANUFACTURED BY LEVITON, LUTRON OR EQUIVALENT. PLATESSHALL MATCH THE
SWITCHES. FURNISH IN GANGS AS NECESSARY.RECEPTACLE SHALL BE COMMERCIAL
GRADE, 125 VOLTS AC, AND 20 AMPERE RATING WITH GROUNDED POLE AND TWO
CIRCUIT OPTION,AS MANUFACTURED BY LEVITON OR EQUIVALENT. PLATES SHALL MATCH
THE RECEPTACLES. FURNISH IN GANGS AS NECESSARY.PROVIDE DEVICE PLATE FOR
EACH AND EVERY OUTLET BOX. FURNISH IN GANGS AS NECESSARY. PLATES AND SCREWS
SHALL BE GRAY UNLESSTHE OWNER PREFERS SOME OTHER COLOR, AND SHALL BE OF THE
SAME MANUFACTURER AS OF THE DEVICES.BALLASTS FOR FLUORESCENT FIXTURES SHALL
BE RAPID START, SYLVANIA ELECTRONIC ENERGY SAVING, HIGH POWER FACTOR AND
SHALL BECLASS "P," CBM, TITLE 24 CERTIFIED WITH INTERNAL THERMAL PROTECTOR
WITH AUTOMATIC RESET AND CLASS "A" SOUND RATING NOISELEVELS LESS THAN 30 dB
MAXIMUM. BALLASTS SHALL BE MANUFACTURED BY SYLVANIA AS SHOWN ON THE
LIGHTING SCHEDULE OR EQUALEQUAL AND SHALL SHALL BE GUARANTEED AT LEAST FOR
FIVE (5) YEARS OF OPERATION AFTER THE ACCEPTANCE. THE BALLAST MODELNUMBER
SHALL BE "2 OR 4 LAMP PSX-SYL Xtreme AS REQUIRED".LAMPS SHALL BE
MANUFACTURED BY SYLVANIA MODEL # SYL "FO28/841XP/SS/ECO OR EQUIVALENT. ALL
LAMPS SHALL BE GUARANTEED FORAT- LEAST 4 YEARS OF OPERATION AFTER THE
ACCEPTANCE.TIME CLOCK SHALL BE ELECTRO-MECHANICAL 24 HOURS SEVEN DAYS TYPE
WITH RESERVE POWER AND CONTACTS RATED 40 A. 4 PST ANDN.E.M.A. TYPE 1 OR 3R
ENCLOSURE. IT SHALL BE SELF POWERED BY A SELF STARTING SYNCHRONOUS MOTOR
WITH MINIMUM 16 HR SPRINGDRIVEN RESERVE POWER AND A DAY OMITTING DEVICE.
TIME CLOCK SHALL BE PARAGON 7007-0, TORK "W" SERIES, OR APPROVED EQUAL.ALL
ELECTRICAL EQUIPMENT, MATERIAL AND WORKMANSHIP SHALL BE GUARANTEED FOR A
PERIOD OF ONE (1) YEAR FROM THE DATE OFACCEPTANCE.THE PLAN LOCATION OF
LIGHTING FIXTURES, JUNCTION BOXES, CONVENIENCE OUTLETS, AND PANEL BOARDS
ARE APPROXIMATE UNLESSDIMENSIONED AND ARE TO BE ADJUSTED BY THE CONTRACTOR
AS REQUIRED IN THE AREAS WHERE CEILING GRID AND OTHER OBSTRUCTIONSDETERMINE
FIXTURE LOCATIONS. THE CONTRACTOR SHALL COORDINATE WITH OTHER
ARCHITECTURAL, MECHANICAL AND OTHER SYSTEMSTO AVOID INTERFERENCE. ALL
CUTTING AND CONSEQUENT REPAIRS IN CONJUNCTION WITH THE WORK SHALL BE THE
RESPONSIBILITY OF THECONTRACTOR. BEAMS OR OTHER STRUCTURAL COMPONENT SHALL
NOT BE CUT WITHOUT THE KNOWLEDGE AND WRITTEN CONSENT OF THEARCHITECT.THE
CONTRACTOR SHALL PROVIDE ALL NECESSARY MATERIALS, LABOR, TRANSPORTATION,
RIGGING & HOISTING, TOOLS, AND STORAGE, ETC.FOR ALL WORK INDICATED AND
REQUIRED FOR COMPLETE INSTALLATION.THE ELECTRICAL WORK SHALL BE EXECUTED IN
ACCORDANCE WITH ALL APPLICABLE CODES AND SHALL INCLUDE COMPLETE TESTING OF
ALLEQUIPMENT AND WIRING. WORKMANSHIP SHALL BE THE HIGHEST QUALITY AS
ESTABLISHED BY TRADE STANDARD.THE CONTRACTOR SHALL BE RESPONSIBLE FOR
OBTAINING NECESSARY PERMITS AND COMMUNICATIONS WITH THE LOCAL
BUILDINGDEPARTMENT AND INSPECTION PERSONNEL TO REVIEW CONTRACT DOCUMENTS
PRIOR TO INSTALLATION.OWNER WILL NOT BE HELD RESPONSIBLE FOR FIELD CHANGES
THAT ARISE FROM CONTRACTOR'S ERROR OR OMISSION OF MATERIALS ORWORKMANSHIP
IN WORK PERFORMANCE.THE CONTRACTOR SHALL INSTALL N.E.M.A. TYPE 1 DISC.
SWITCHES FOR INDOOR AND N.E.M.A. TYPE 3R DISC. SWITCHES FOR OUT
DOORAPPLICATIONS. ALL DISCONNECT SWITCHES FOR SERVICE CONDUCTOR ENTRANCES
SHALL BE RATED AT LEAST 100K AIC. DISCONNECTSWITCHES FOR MOTOR CIRCUIT AND
FIXED LOAD (SUCH AS HVAC EQUIPMENT, AND WATER HEATER ETC.) CIRCUITS SHALL
BE FUSIBLE OR NONFUSIBLE AS SHOWN ON THE DRAWINGS OR REQUIRED BY THE
MANUFACTURER.THE CONTRACTOR SHALL USE DUAL ELEMENT, TIME DELAY CURRENT
LIMITING, 100,000 AMP AIC RATED, CLASS RK-1 FUSES WHENPROTECTING PANEL
BOARDS AND TRANSFORMERS AND 100,000 AMP AIC RATED CLASS RK-5 FUSES WHEN
PROTECTING MOTORS UNLESSNOTED OTHERWISE OR REQUIRED DIFFERENTLY BY THE
MANUFACTURER. ALL FUSES IN ANY DISC.. SW SHALL BE OF THE SAME
MANUFACTURERAND SHALL BE MANUFACTURED BY BUSSMANN, GOULD SHAWMUT OR
EQUIVALENT.THE BIDDERS SHALL BE QUALIFIED, EXPERIENCED, AND LICENSED
ELECTRICAL CONTRACTORS. THEY MUST BE FAMILIAR WITH ALLFEDERAL, STATE, AND
LOCAL LAWS, ORDINANCES, RULES, AND REGULATIONS THAT MAY, IN ANY MANNER,
AFFECT THE TASK.BEFORE SUBMITTING THE BID, THE BIDDERS MUST REVIEW THE
TENANT INFORMATION AND CRITERIA MANUAL, SPECIFICATIONS, PLANS,DRAWINGS, AND
ALL OTHER CONDITIONS AND REQUIREMENTS THAT MAY, IN ANY MANNER AFFECT THE
WORK UNDER CONTRACT. THEYMUST VISIT THE SITE OF THE PROPOSED PROJECT TO
FAMILIARIZE THEMSELVES WITH THE LOCAL CONDITIONS, FIRE RATINGREQUIREMENTS,
AND THE NATURE OF THE PROJECT. THE PRICING SHALL BE BASED ON THESE
SPECIFICATIONS AND THE MATERIALSSHOWN ON THE DRAWINGS. SUBMISSION OF THE
BIDS SHALL BE CONSIDERED AS THE EVIDENCE THAT THE BIDDER IS FAMILIARIZED TO
ALLTHE FACETS OF THE SPECIFIED PROJECT. CONTRACTOR SHALL USE APPLICABLE
SECTIONS OF THIS SPEC.ANY EXCEPTIONS, OMISSIONS, DISCREPANCIES, AND DOUBTS
REGARDING PLANS, DRAWINGS, AND SPECIFICATIONS, IF ANY, SHALL BECOMMUNICATED
PROMPTLY IN WRITING TO THE ARCHITECT OR TO THE ENGINEER FOR THEIR REVIEW
AND RESPONSE BACK BEFORE THEBID SUBMISSION DATE. NO ORAL COMMUNICATION
REGARDING THE EXCEPTIONS OR CHANGES SHALL BE ACCEPTED. BIDDERS SHALL
BENOTIFIED OF ANY CHANGES, IF MADE, DUE TO THE ACCEPTANCE OF EXCEPTIONS
BEFORE THE BID SUBMITTAL DATE.ALL MATERIAL TAKE OFFS, OTHER THAN THE
EXISTING DEVICES, SHALL BE MADE USING THE LIGHT & POWER WIRING AND
CONDUITDRAWINGS AND THEIR ASSOCIATED REFERENCES INCLUDING THE
SPECIFICATIONS OF THIS PROJECT ON THIS DRAWING. ALL LIGHTINGMATERIALS
INCLUDING TRANSFORMER, PANELS, FIXTURES, SWITCHES, RECEPTACLES, WIRES AND
RACEWAYS, ETC. SHALL BEPURCHASED BY THE CONTRACTORS PER SECTION NO. 2,
UNLESS NOTED OTHERWISE.THE BID PRICE SHALL INCLUDE LABOR AND MATERIAL
COSTS, NECESSARY INSURANCE COSTS AND PERMITS FEES AS REQUIRED TOINSTALL THE
COMPLETE ELECTRICAL SYSTEM IN COMPLIANCE WITH THE DESIGN REQUIREMENTS OF
THIS PROJECT.THE SUCCESSFUL BIDDER WILL BE REFERENCED AS THE CONTRACTOR
FROM THIS POINT ONWARDS THROUGHOUT THE REST OF THESPECIFICATION.THE
CONTRACTOR SHALL USE EXPERIENCED AND SKILLED PERSONS TO PERFORM ALL THE
ELECTRICAL INSTALLATION WORK UNDER THECONSTANT SUPERVISION OF LICENSED
ELECTRICIANS AND/OR LICENSED JOURNEYMAN ELECTRICIANS.THE CONTRACTOR SHALL
BE RESPONSIBLE FOR OBTAINING ALL REQUIRED PERMITS, PAYING ALL FEES, AND
PROVIDING ALL NECESSARYINSPECTIONS INCIDENTAL TO THE ELECTRICAL PORTION OF
THE WORK.THE INSTALLATION WORK SHALL COMPLY WITH ALL APPLICABLE STATE,
COUNTY, AND LOCAL BUILDING CODES. APPLICABLE CODES, AS AMINIMUM, WILL
INCLUDE THE LATEST EDITION OF THE FOLLOWING. THESE WILL BE CONSIDERED PART
OF THE SPECIFICATION OF THISPROJECT.A) BUILDING CODE OF THE APPLICABLE CITY
AND COUNTY.B) NATIONAL ELECTRICAL CODE NFPA 70, 2014C) LIFE SAFETY CODE
NFPA 101, 2015D) S.B.C.C.I. LATEST EDITION.IN CASE OF SUBSTITUTIONS THE
CONTRACTOR SHALL PROVIDE A WRITTEN REQUEST TO THE ARCHITECT FOR HIS REVIEW
. THECONTRACTOR SHALL IDENTIFY CLEARLY THE DIFFERENCE BETWEEN THE SPECIFIED
ITEMS AND THE SUBSTITUTE ITEMS, INCLUDING THEECONOMIC IMPACT ON THE
PROJECT. THE SUBSTITUTE ITEM SHALL NOT BE ORDERED OR USED UNLESS APPROVED
BY THE ARCHITECTAND/OR BY THE OWNER IN WRITING.THE CONTRACTOR SHALL SUBMIT
FIVE SETS OF SHOP DRAWINGS FOR SPECIFIED PRODUCTS AT ONE TIME WITHIN THIRTY
(30) DAYS FROMTHE OFFICIAL NOTICE TO PROCEED.SHOP DRAWING SUBMITTAL SHALL
BE MADE FOR THE FOLLOWING MATERIALS AND SYSTEMS:A. LIGHTING FIXTURES,
DIMMERS, LAMPS, AND SAFETY SWITCHES.B. TRANSFORMERS, SWITCH BOARDS,
DISTRIBUTION PANELS , DISCONNECTS, AND WIREWAYS IF PURCHASED NEW.C. METER
CENTERS, CIRCUIT BREAKERS, FUSES, MOTOR STARTERS IF PURCHASED FOR THIS
PROJECT.D. TIME CLOCK AND OTHER DEVICES. E) SCHEMATIC DIAGRAMS FOR THE
ABOVE ITEMS.THE CONTRACTOR SHALL PROVIDE FOLLOWING DOCUMENTS BEFORE THE
CLOSING OF THE PROJECT AND PRIOR TO THE FINAL PAYMENT:A. ONE YEAR WRITTEN
WARRANTY FOR ANY DEFECT IN WORKMANSHIP, MATERIAL, AND EQUIPMENT.B.TWO SETS
OF MANUFACTURER'S OPERATIONAL AND MAINTENANCE MANUALS IF APPLICABLE.C.
MANUFACTURER'S WARRANTIES AND WARRANTY CERTIFICATES.D. TWO SETS OF
REPRODUCIBLE OR RED MARKED UP PRINTS OF "AS-BUILT" DRAWINGS, ONE FOR THE
ARCHITECT AND ONE FOR THEOWNER OF THE PROJECT.THE CONTRACTOR SHALL MAKE
SURE ON A DAILY BASIS THAT ALL UNNECESSARY MATERIAL AND TRASH CONTRIBUTED
BY HIS TRADE AREREMOVED.THE CONTRACTOR SHALL CONCEALED ALL THE CONDUIT IN
THE FINISHED AREAS.ALL LIGHTING FIXTURES, EMERGENCY & EXIT LIGHTS SHALL BE
AS LISTED ON THE LIGHT FIXTURE SCHEDULE; HOWEVER BEFORE PURCHASINGANY LIGHT
FIXTURES, SUBMIT FIXTURE. CUT SHEETS FOR THE ARCHITECT AND THE OWNER'S
APPROVAL.1.0GENERALTHE CONTRACTOR SHALL BE RESPONSIBLE FOR VERIFICATION OF
ALL UTILITIES PLACEMENT, AS IDENTIFIED ON THE RISER DIAGRAM, ANDLOCATION OF
THE ELECTRICAL SERVICE EQUIPMENT. THE CONTRACTOR SHALL PAY ALL NECESSARY
CHARGES ASSOCIATED WITHINSTALLATION OF ALL UTILITIES TO THE POWER COMPANY
PRIOR TO THE CONSTRUCTION. A LETTER SHALL BE PROVIDED FROM THE POWERCOMPANY
THAT ALL THE CHARGES HAVE BEEN PAID IN FULL.NECESSARY AND OBVIOUSLY
REQUIRED, ELECTRICAL ITEMS THAT ARE NOT SHOWN ON THE DRAWINGS, SHALL NOT
RELIEVE THE CONTRACTOROF HIS RESPONSIBILITIES TO INSTALL A COMPLETE AND
SAFE ELECTRICAL SYSTEM.THE ELECTRICAL CONTRACTOR SHALL FOLLOW THE SAME
COLOR CODE IDENTIFICATION FOR EACH PHASE THROUGHOUT THE SYSTEM FROMSERVICE
SWITCH OR TRANSFORMER THROUGH ALL BRANCH CIRCUITS.JUNCTION BOXES FOR NEON
SIGN LIGHTS, SWITCHES, LIGHTING FIXTURES, RECEPTACLES AND FOR PULLING WIRES
SHALL BE ASAPPROXIMATE AS SHOWN ON THE PLANS BUT EXACT LOCATIONS SHALL BE
GOVERNED BY THE ARCHITECTURAL PLANS.ALL OUTLET BOXES SHALL HAVE SQUARE CUT
CORNERS. AIR SPACE GREATER THAN 1/8" AROUND OUTLET BOXES, AND ADJACENT
DRYWALLWILL NOT BE PERMITTED. THE CONTRACTOR SHALL COORDINATE WITH DRYWALL
INSTALLER PRIOR TO INSTALLATION. CAULK AROUND BOXESTO ELIMINATE STEEL
OUTLET.LIGHTING SWITCHES AND CONVENIENCE RECEPTACLES SHALL BE FLUSH MOUNTED
IN SECTIONAL SWITCH BOXES WITH MATCHING COVERPLATES UNLESS NOTED
OTHERWISE.THE MOUNTING ARRANGEMENT OF EACH FIXTURE WILL BE DETERMINED BY
THE CONTRACTOR EXCEPT WHERE THE MANUFACTURER HAS GIVENSPECIFIC MOUNTING
INSTRUCTIONS.THE CONTRACTOR SHALL FURNISH AND INSTALL ALL LUMINARIES,
DEVICES, AND EQUIPMENT AS SPECIFIED AND SHOWN ON THE PLANDIAGRAMS. PROVIDE
ALL CABLES, CONDUCTORS, CONDUITS, AND CONNECTIONS AS REQUIRED TO PROVIDE
COMPLETE AND OPERATIONALELECTRICAL AND MECHANICAL SYSTEMS. ALL CONDUITS
SHALL BE RUN CONCEALED IN FINISHED AREAS.INDIVIDUAL BREAKERS WILL SUPPLY
ELECTRICAL POWER TO INDIVIDUAL SIGN OR NEON LIGHT CIRCUITS. NEON
TRANSFORMER EQUIPMENT ISTO BE CONCEALED ABOVE ADJACENT COLUMN ENCLOSURE OR
TO BE INSTALLED AS SHOWN ON ARCHITECTURAL DRAWINGS.ALL JOINTS IN CONDUIT
AND RACEWAY SHALL BE MADE TIGHT AND BENDS SHALL BE MADE OVER LONG RADIUS
WHERE ENTERING A CABINETAND JUNCTION BOX. THE CONTRACTOR SHALL SUPPORT ALL
CONDUIT AND RACEWAYS SECURELY FROM JOISTS AND/OR BEAMS (TIE WIRESARE NOT
ACCEPTABLE). THE CONTRACTOR SHALL VERIFY ALL RACEWAY SIZES IN ACCORDANCE
WITH THE N.E.C. CODE. NO CONDUIT SHALLCARRY MORE THAN THREE (3) CURRENT
CARRYING CONDUCTORS. NOTE: ALL JOB CUT THREADS SHALL BE COATED WITH RUST
RESISTANTZINC CHROMATE FOR THIN WALL EMT.LIGHTING CONDUITS SHALL BE
SUPPORTED AT EVERY 8 FEET.ELECTRICAL RACEWAYS AND SHALL BE SIZED IN
ACCORDANCE WITH NATIONAL ELECTRIC CODE (N.E.C.), ARTICLE 250. ALL BRANCH
CIRCUITSSHALL HAVE A SEPARATE GREEN INSULATED GROUND WIRE IN EACH CONDUIT
RUN. ISOLATED GROUND CONDUCTORS SHALL BE ROUTED TOTHOSE CIRCUITS WHICH NEED
ISOLATED GROUND SPECIALLY FOR COMPUTERS AND CASH REGISTERS.MOUNTING HEIGHT
OF LIGHTING EQUIPMENT, UNLESS NOTED OTHERWISE ON ARCHITECTURAL PLANS SHALL
BE APPROXIMATELY AS FOLLOWS:A. LIGHTING SWITCHES CENTERLINE 4 FEET ABOVE
A.F.FB. CONVENIENCE OUTLETS CENTERLINE 1 FEET, 6 INCHES A.F.FC. LIGHTING &
POWER PANELS TOP 6 FEET, 6 INCHES ABOVE A.F.FD. EMERGENCY LIGHT FIXTURES 9'
ABOVE A.F.F TO BOTTOM OF THE UNIT.PANEL BOARDS SHALL BE GENERAL PURPOSE
N.E.M.A. TYPE 1 OR TYPE 3R ENCLOSURES SUITABLE FOR SPECIFIED INDOOR OR OUT
DOORLOCATIONS AND AND FLUSH OR SURFACE MOUNTING APPLICATIONS AS INDICATED
ON THE PANEL SCHEDULE. PANEL BOARDS AND THEINTERNAL COMPONENTS SHALL BE
RATED TO PERFORM THEIR FUNCTIONS CONTINUOUSLY AT 40°C AMBIENT AND 50%
RELATIVE HUMIDITY.BUSSES, TERMINALS, AND LUGS SHALL BE RATED AND CAPABLE TO
FUNCTION CONTINUOUSLY AT 75 DEGREES CENTIGRADE. PANEL BOARDSSHALL BE AS
MANUFACTURED BY WESTINGHOUSE ELECTRIC CORP., GENERAL ELECTRIC, SQUARE 'D',
CHALLENGER, OR APPROVED EQUAL.A NAMEPLATE LISTING PANEL NUMBER, TYPE,
MANUFACTURER'S NAME, NUMBER OF PROTECTIVE AND SWITCHING DEVICES,
VOLTAGE,CURRENT, PHASE AND AIC RATINGS SHALL BE PROVIDED.BRANCH CIRCUITS
SHALL BE ARRANGED USING DOUBLE ROW CONSTRUCTION. ALL INTERIORS SHALL BE
COMPLETELY FACTORY ASSEMBLEDWITH SWITCHING AND PROTECTIVE DEVICES, WIRE
CONNECTORS, ETC. ALL WIRE CONNECTORS, EXCEPT SCREW TERMINALS, SHALL BE OF
THEANTI-TURN SOLDERLESS TYPE AND ALL SHALL BE SUITABLE FOR COPPER WIRE OF
THE SIZES INDICATED ON DRAWINGS OR IN THE PANELSCHEDULES AND CONTINUOUSLY
FUNCTIONING AT 75 DEGREE CENTIGRADE.ALL BREAKERS, SIZED AS SHOWN ON PANEL
SCHEDULE, SHALL BE BOLT-ON BREAKERS.INTERIORS SHALL BE SO DESIGNED THAT
SWITCHING AND PROTECTIVE DEVICES CAN BE REPLACED WITHOUT DISTURBING
ADJACENT UNITSAND WITHOUT REMOVING THE MAIN BUS CONNECTORS AND SHALL BE SO
DESIGNED THAT CIRCUITS MAY BE CHANGED WITHOUT MACHINING,DRILLING, OR
TAPPING.BUS BARS FOR THE MAINS SHALL BE OF COPPER AND SIZED IN ACCORDANCE
WITH UNDERWRITERS' LABORATORIES STANDARDS. UNLESSNOTED OTHERWISE, FULL SIZE
NEUTRAL BARS SHALL BE INCLUDED. BUS BAR TAPS FOR PANELS WITH SINGLE POLE
BRANCHES SHALL BEARRANGED FOR SEQUENCE PHASING OF THE BRANCH CIRCUIT
DEVICES.THE SHORT CIRCUIT RATING OF THE ASSEMBLED PANEL BOARD SHALL BE IN
ACCORDANCE WITH UL. INC. STANDARDS AND THEIR TESTVERIFICATION.PHASE BUSSING
SHALL BE FULL HEIGHT WITHOUT REDUCTION. CROSS AND CENTER CONNECTORS SHALL
BE COPPER.NEUTRAL AND GROUND BUSSING SHALL HAVE SUITABLE LUGS FOR OUTGOING
FEEDERS REQUIRING A NEUTRAL AND GROUND CONNECTIONS.SPACES FOR FUTURE
SWITCHING AND PROTECTIVE DEVICES ON LIGHTING AND APPLIANCE DISTRIBUTION
PANELS SHALL BE BUSSED FOR THEMAXIMUM DEVICE THAT CAN BE FITTED INTO
THEM.PROVIDE BLANK FILLER PLATES IN THE EMPTY SPACES.THE CIRCUIT BREAKERS
ARE TO BE INDUSTRIAL MOLDED CASE BOLT ON TYPE, STANDARD THERMAL, MAGNETIC,
WITH TRIP FREE MECHANISM,THREE POSITIONHANDLES INDICATING "ON" "OFF" AND
"TRIPPED" CONDITION.EACH POLE SHALL PROVIDE INVERSE TIME DELAY AND
INSTANTANEOUS CIRCUIT PROTECTION. THE BREAKER RATING AND CONFIGURATIONSHALL
BE AS INDICATED ON THE PANEL BOARD SCHEDULE. ALL MULTI POLE BREAKERS SHALL
HAVE AN INTERNAL COMMON TRIP.ALL BREAKER LUGS SHALL BE SUITABLE TO
WITHSTAND 75 DEGREE CENTIGRADE WITHOUT MALFUNCTIONING.HINGED DOORS IN PANEL
TRIMS SHALL COVER ALL SWITCHING DEVICE HANDLES AND SHALL CONFORM TO THE
FOLLOWING REQUIREMENTS:1. DOORS SHALL NOT UNCOVER ANY LIVE PARTS WHILE
MAKING SWITCHING DEVICE HANDLES ACCESSIBLE.2. DOORS SHALL HAVE FLUSH-TYPE
CYLINDER LOCK AND CATCH, EXCEPT THAT DOORS OVER 48" IN HEIGHT SHALL HAVE
AUXILIARYFASTENERS AT TOP AND BOTTOM OF DOOR IN ADDITION TO FLUSH -TYPE
CYLINDER LOCK AND CATCH. DOOR HINGES SHALL BECONCEALED. ALL LOCKS SHALL BE
KEYED ALIKE. DIRECTORY FRAME AND CARD HAVING A TRANSPARENT COVER SHALL BE
FURNISHED ONEACH DOOR.THE TRIMS SHALL BE FABRICATED FROM CODE GAUGE SHEET
STEEL. ALL EXTERIOR AND INTERIOR STEEL SURFACES OF THE PANEL BOARDSSHALL BE
PROPERLY CLEANED PRIMED AND PAINTED IN ACCORDANCE WITH THE MANUFACTURER'S
STANDARD SPECIFICATIONS AND COLOR.TRIMS FOR FLUSH MOUNT PANELS SHALL
OVERLAP THE BOX BY AT LEAST 3/4" ALL AROUND. SURFACE MOUNT PANELS TRIMS
SHALL HAVE THESAME WIDTH AND HEIGHT AS OF THE BOX. TRIMS SHALL BE MOUNTABLE
BY A SCREW DRIVER WITHOUT THE NEED FOR SPECIAL TOOLS.BOXES SHALL BE MADE
FROM UNPAINTED GALVANIZED CODE GAUGE STEEL HAVING MULTIPLE KNOCKOUTS ON THE
TOP AND THE BOTTOMEXCEPT WHERE NOTED OTHERWISE. BOXES SHALL BE OF
SUFFICIENT SIZE TO PROVIDE A MINIMUM GUTTER SPACE OF 4" ON ALL SIDES.WHERE
FEEDER CABLES SUPPLYING THE MAINS OF A PANEL ARE CARRIED THROUGH ITS BOX TO
SUPPLY OTHER ELECTRICAL EQUIPMENT, THEBOX SHALL BE SO SIZED AS TO INCLUDE
THIS WIRING SPACE. THIS WIRING SPACE SHALL BE IN ADDITION TOTHE MINIMUM
GUTTER SPACE SPECIFIED ABOVE AND THE LIMITING WIDTH MAY BE INCREASED
ACCORDINGLY. AT LEAST FOUR (4) INTERIORMOUNTING STUDS SHALL BE PROVIDED.ALL
UNUSED HOLES IN THE BOXES SHALL BE PLUGGED WITH APPROVED INSERT CAPS. BOXES
SHALL BE "STEEL CITY" OR EQUAL.WEST COUNTY CENTER89 WEST COUNTY CENTER
DRIVE, SPACE FC14DES PERES, MISSOURI 63131Shane R.Hamilton,
P.E.E3.0ELECTRICALSPECIFICATIONSTHE CONTRACTOR SHALL BE RESPONSIBLE FOR
CARRYING NECESSARY INSURANCE AS REQUIRED BY LAW AND LANDLORD TO
PROTECTEMPLOYEES, OTHER PERSONS, EQUIPMENT, AND MATERIAL.TEMPORARY
ELECTRICAL POWER IS AT TENANT'S EXPENSE IN ACCORDANCE WITH THE LEASE
REQUIREMENTS.ALL SLAB OR ROOF PENETRATIONS SHALL BE MADE WITH APPROVED FIRE
RATED SMOKE BARRIER FITTINGS. PROVIDE ACCESSORIES (PITCHPOCKETS, SLEEVES,
ETC.) AS REQUIRED.ALL ROOF PENETRATIONS MUST BE BY LL. CONTRACTOR AT
TENANT'S EXPENSE.4.0TRANSFORMER AND PANEL BOARD SPECIFICATIONS
:3.283.233.253.243.263.203.213.22THE CONTRACTOR SHALL PROVIDE LIGHTNING
PROTECTION VOLTAGE SURGE PROTECTOR FOR ALL SERVICE PHASE CONDUCTORS TO
GROUND(IF IT IS NOT ALREADY THERE IN CASE OF RENOVATIONS). DEVICE SHALL BE
APT TE 400 OR APPROVED EQUIVALENT.LUMINARIES SHALL BE AS SPECIFIED IN THE
"LIGHTING FIXTURE SCHEDULE". ALL RECESSED AND LAY-IN FIXTURES SHALL BE
SUPPORTED FROMTHE FOUR CORNERS WITH SUPPORTS CAPABLE OF CARRYING TWICE THE
WEIGHT OF THE FIXTURE. ALL SUPPORTS SHALL BE ATTACHED TOTHE JOISTS AND/OR
BEAMS. NO LIGHTING FIXTURE SHALL BE INSTALLED WITHIN 2 FEET OF ANY
SPRINKLER HEAD.THE CONTRACTOR SHALL INSTALL ALL TELEPHONE JACKS AND WIRING
FROM THE MAIN TELEPHONE TERMINAL BOARD TO THE FINALTELEPHONE OUTLETS.
WIRING SHALL BE INSTALLED IN A MINIMUM 1/2 INCH CONDUIT.THE CONTRACTOR
SHALL COORDINATE WITH THE FIRE PROTECTION CONTRACTOR AND SHALL MAKE ALL
NECESSARY CONNECTIONS BETWEENDUCT SMOKE DETECTORS AND HVAC UNITS.ALL
JUNCTION BOXES SHALL BE ACCESSIBLE FROM BELOW. OTHERWISE, CONTRACTOR SHALL
PROVIDE ACCESS PANEL AT ALL JUNCTION BOXLOCATIONS AND SMOKE DETECTORS.LOW
VOLTAGE WIRING LOCATED ABOVE THE CEILING SHALL BE PLENUM RATED OR INSTALLED
IN METAL CONDUIT.A PLASTIC COVERED TYPE WRITTEN IDENTIFICATION CARD FOR ALL
MAIN AND BRANCH CIRCUITS INCLUDING SPARES SHALL BE POSTED ATTHE INSIDE OF
THE PANEL DOOR.LOCK-ON DEVICES ON PANEL CIRCUIT BREAKERS FOR NIGHT, EXIT
AND EMERGENCY LIGHTING CIRCUITS SHALL BE PROVIDED AND THE SHALLBE GIVEN TO
THE OWNER.THIS SECTION SHALL APPLY TO THE NEW TRANSFORMER, PANEL BOARDS,
CIRCUIT BREAKERS, PANEL BOXES & TRIMS, DISCONNECTSWITCHES, AND FUSES.IF NOT
ALREADY EXISTING, THE CONTRACTOR SHALL FURNISH ALL THE NECESSARY DISCONNECT
SWITCHES, RELAY BOXES, AND CONTROLBOXES AS REQUIRED AND RECOMMENDED BY THE
HVAC MANUFACTURER FOR THE HVAC UNIT AND WATER HEATER. THE
ELECTRICALCONTRACTOR SHALL COORDINATE WITH THE MECHANICAL CONTRACTOR AND
MAKE ALL NECESSARY CONNECTIONS TO MAKE THE HVACSYSTEM
FUNCTIONAL.3.2703-27-20241REVISED PER LANDLORD·CONTRACTOR SHALL REVIEW THE
SPECIFICATIONS, GENERAL NOTES, KEY NOTES, ELECTRICALPLANS AND THE LANDLORD
DESIGN CRITERIA BEFORE BIDDING AND STARTING ANYCONSTRUCTION WORK.·ALL
INSTALLATION SHALL COMPLY WITH THE REQUIREMENTS OF THE DESIGN
DOCUMENTS,LANDLORD DESIGN CRITERIA AND N.E.C. REQUIREMENTS.·CONTRACTOR
SHALL FURNISH AND INSTALL NEW POWER SUPPLY AND DISCONNECT SWITCH,HOWEVER
REUSE EXISTING POWER PANELS, XFRMR AND FEEDERS TO COMPLY WITH
PANELSCHEDULES. REFER TO KEY NOTE #22.·CONTRACTOR VERIFY EXISTING AND
FURNISH AND INSTALL NEW WIRING AS SHOWN ON THEELEC. PLANS, PANEL SCHEDULES
AND RISER DIAGRAM. ALL EXISTING AND NEW WIRING SHALLBE IN COMPLIANCE WITH
N.E.C. TABLE 310-16.·PULL STRINGS SHALL BE PROVIDED IN ALL EMPTY CONDUIT.
FOR TELEPHONE AND LOWVOLTAGE SYSTEM.·INTERIOR TELEPHONE WIRING SHALL
INCLUDE FURNISHING AND INSTALLING ALL TELEPHONEJACKS, AND COVER PLATES AS
REQUIRED. COORDINATE WITH THE TENANT.·LABEL ALL ELECT. EQUIPMENT WITH
ENGRAVED BAKELITE NAMEPLATE OR EMBOSSED PLASTICNAME STRIP. LABEL ALL PANELS
AS SHOWN ON THE RISER DIAGRAM.·FURNISH A TYPE WRITTEN CIRCUIT DIRECTORY
CARD FOR ALL PANELS, LISTING ALL USED ANDSPARE CIRCUITS.·CONTRACTOR SHALL
VERIFY AND COORDINATE ALL ELECTRICAL REQUIREMENTS ANDLOCATIONS OF ALL HVAC
EQUIPMENT PRIOR TO INSTALLATION.·ALL OUTLET AND SWITCHES COVER PLATES SHALL
BE STAINLESS STEEL. ALL OUTLET BOXESSHALL BE MOUNTED FLUSH IN WALLS AND
SHALL BE MOUNTED AT HEIGHT AS INDICATED ONTHE EQUIP. PLAN. COORDINATE ALL
LOCATIONS WITH EQUIPMENT INSTALLATION ANDARCHITECTURAL DRAWINGS.·ALL
ELECTRICAL DEVICES AND EQUIPMENT SHALL BE EFFECTIVELY GROUNDED IN
ACCORDANCEWITH N.E.C. REQUIREMENTS. ALL BRANCH CIRCUITS SHALL HAVE A
SEPARATE GREENINSULATED GROUND WIRE IN EACH CONDUIT RUN.·CONTRACTOR SHALL
BE RESPONSIBLE FOR ALL ELECTRICAL CONNECTIONS UNLESS
NOTEDOTHERWISE.·CONTRACTOR SHALL BE RESPONSIBLE FOR COMMUNICATION WITH THE
PROPERTY OWNER'SPERSONNEL TO REVIEW CONTRACT DOCUMENTS PRIOR TO
INSTALLATION.·CONTRACTOR TO SEAL ALL WALL PENETRATIONS IN AN APPROVED
MANNER TO INSURE THEFIRE RATING INTEGRITY OF THE INVOLVED AREAS.·COORDINATE
FINAL INSTALLATION REQUIREMENTS WITH PROPER AUTHORITIES. ANDLANDLORD'S
MANAGER.·CONTRACTOR, UPON COMPLETION OF HIS WORK , SHALL BE RESPONSIBLE TO
PROVIDE ANYAND ALL CERTIFICATIONS.·CONTRACTOR SHALL COMPLY WITH THE
LANDLORD'S DESIGN CRITERIA FOR ELECTRICAL ANDFIRE ALARM SYSTEMS. MAKE
NECESSARY CONNECTIONS BETWEEN TENANT'S FIRE DETECTINGDEVICES AND THE LAND
LORD'S FIRE ALARM STATION.·ALL CONDUIT RUNS ABOVE CEILING SHALL BE PARALLEL
OR PERPENDICULAR TO THE COLUMNLINES.·ALL CABLES AND WIRES SIZES SHALL
COMPLY WITH N.E.C. TABLE 310-16. MINIMUM SIZE OFCONDUCTOR SHALL BE #12 AWG
CU. NO. 10 WIRES SHALL BE USED IN PLACE OF #12 FORCIRCUITS LONGER THAN 100
FEET FROM PANEL TO LOAD. ALUMINUM CONDUCTOR SHALL NOTBE PERMITTED. WIRE
INSULATION SHALL BE THHN OR THWN.·ALL INTERIOR WIRING SHALL BE CONCEALED
AND IN GAL. STEEL OR EMT COND. AND INCOMPLIANCE WITH THE N.E.C. AND LAND
LORD'S DESIGN CRITERIA.·CONTRACTOR MAY USE FLEXIBLE CONDUIT FROM JUNCTION
BOX TO THE LIGHTING FIXTURE,BETWEEN LIGHTING FIXTURES, AND TO OTHER DEVICES
PROVIDED THE LENGTH OF THE FLEX.CONDUIT IS NOT MORE THAN 6 FEET.·MC CABLES
SHALL NOT BE USED FOR HOME RUN CIRCUITS AND FOR THE WIRING WITHINPARTITION
OR DEMISING WALL CONSTRUCTION. ALL IN-WALL CONCEALED WIRING MUST BERUN IN
RIGID CONDUITS.·THE GROUND ON THE SEPARATELY DERIVED SERVICE SHALL BE
BONDED TO THE BUILDINGSTEEL AND TO THE INCOMING COLD WATER METAL PIPING
WITH CAD WELD CONNECTION.REFER TO KEY NOTE #22.·ALL BREAKERS IN ALL PANELS
SHALL BE BOLTED THERMAL MAGNETIC TYPE. TWO (2) ANDTHREE (3) POLE MOLDED
CASE CIRCUIT BREAKERS SHALL BE WITH COMMON TRIP.·UNLESS NOTED OTHERWISE,
WIRE AND CABLE SIZES SHALL BE IN COMPLIANCE WITH BRANCHCIRCUIT FEEDER
CIRCUIT SCHEDULE, RISER DIAGRAM AND THE N.E.C. TABLE 310-16.·ROMAX, TYPE AC
AND NM CABLES SHALL NOT BE PERMITTED.·CONDUCTORS SHALL BE COPPER PER LL
CRITERIA.·ALL BREAKERS USED FOR LIGHTING CIRCUITS SHALL BE CONTINUOUS DUTY
LIGHT SWITCHINGRATING.GENERAL NOTES:1LANDLORD REVIEWED 04/18/24 SJC

word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word word word word word word word word word
word word word word word word word word

mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1
mmMwWLliI0fiflO&1

www.dropbox.com Open in urlscan Pro 2620:100:601b:18::a27d:812 Public Scan

Form analysis 0 forms found in the DOM

Text Content

www.dropbox.com Open in urlscan Pro
2620:100:601b:18::a27d:812 Public Scan

Form analysis
0 forms found in the DOM